[PATCH 4/4] {minor} cosmetics: untabify the install-sh script

* lib/install-sh: Here, plus a couple of related formatting tweaks.

Signed-off-by: Stefano Lattarini <[email protected]>
---
 lib/install-sh | 274 ++++++++++++++++++++++++++++-----------------------------
 1 file changed, 137 insertions(+), 137 deletions(-)

diff --git a/lib/install-sh b/lib/install-sh
index be3c5d9..0436737 100755
--- a/lib/install-sh
+++ b/lib/install-sh
@@ -41,9 +41,10 @@ scriptversion=2013-10-30.23; # UTC
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
 # Set DOITPROG to "echo" to test this script.
 
@@ -121,40 +122,39 @@ while test $# -ne 0; do
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
 
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
 
     -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
-	break;;
+    --) shift
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
 
     *)  break;;
   esac
@@ -207,16 +207,16 @@ if test -z "$dir_arg"; then
 
     *[0-7])
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -254,8 +254,8 @@ do
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
       fi
       dstdir=$dst
       dst=$dstdir/`basename "$src"`
@@ -272,74 +272,74 @@ do
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
@@ -349,9 +349,9 @@ do
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
       esac
 
       oIFS=$IFS
@@ -366,34 +366,34 @@ do
 
       for d
       do
-	test X"$d" = X && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -428,8 +428,8 @@ do
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
        set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
@@ -446,24 +446,24 @@ do
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
-- 
1.8.3.1.605.g85318f5