[FYI] {minor} TAP driver: remove perl implementation (move it into contrib/)

That implementation was only meant as a standard against which the
portable awk+shell implementation was to be measured.  Now, since
Automake 1.12, the latter implementation is fully functional and
already used in the wild, and in fact feature-par with the perl
implementation.  So the perl implementation is now just slowing
down and complicating our testsuite.  Let's move it to 'contrib/'
(we don't want to remove it, in case someone is actually using it
in the wild).

* lib/tap-driver.pl: Move it ...
* contrib/tap-driver.pl: ... here.  While at it, convert quoting
`like this' to quoting 'like this', and remove an obsolescent FIXME
comment.
* lib/Makefile.inc (dist_script_DATA): Drop '%D%/tap-driver.pl'.
* Makefile.am (EXTRA_DIST): Add 'contrib/tap-driver.pl'.
* doc/automake.texi: Remove one stray reference to 'tap-driver.pl',
and reference 'tap-driver.sh' instead, as intended.
* t/ax/am-test-lib.sh ($am_tap_implementation): Delete definition and
uses.
(fetch_tap_driver): Simplify to unconditionally assume the shell+awk
implementation of the TAP driver is used.
(get_shell_script): Make more flexible so that it can cater to the
needs of 'fetch_tap_driver()'.
* t/tap-bad-prog.tap: Likewise.
* t/tap-bailout-leading-space.sh: Likewise.
* t/tap-signal.tap: Likewise.
* t/tap-test-number-0.sh: Likewise.
* t/test-driver-cond.sh: Use 'tap-driver.sh' instead of 'tap-driver.pl'.
* gen-testsuite-part (%test_generators): Do not generate sister tests
that use the perl TAP driver rather than the shell+awk one.
* NEWS: Update.

Signed-off-by: Stefano Lattarini <[email protected]>
---
 Makefile.am                    |  1 +
 NEWS                           |  9 +++++++
 {lib => contrib}/tap-driver.pl |  9 ++++---
 doc/automake.texi              |  2 +-
 gen-testsuite-part             | 14 -----------
 lib/Makefile.inc               |  3 +--
 t/ax/am-test-lib.sh            | 53 +++++++++++++++---------------------------
 t/tap-bad-prog.tap             | 30 ++++--------------------
 t/tap-bailout-leading-space.sh |  9 ++-----
 t/tap-signal.tap               |  9 ++-----
 t/tap-test-number-0.sh         | 24 -------------------
 t/test-driver-cond.sh          |  8 +++----
 12 files changed, 47 insertions(+), 124 deletions(-)
 rename {lib => contrib}/tap-driver.pl (98%)

diff --git a/Makefile.am b/Makefile.am
index 143308a..f8b6ac5 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -92,6 +92,7 @@ ChangeLog:
 
 # Third-party, obsolescent or experimental stuff.
 EXTRA_DIST += \
+  contrib/tap-driver.pl \
   contrib/check-html.am \
   contrib/multilib/README \
   contrib/multilib/config-ml.in \
diff --git a/NEWS b/NEWS
index 5cc0019..24dafdd 100644
--- a/NEWS
+++ b/NEWS
@@ -73,6 +73,15 @@ New in 1.15:
     (3) the "set -f" and "set +f" shell commands work, and, respectively,
         disable and enable shell globbing.
 
+* Automake-generated testsuite:
+
+  - The perl implementation of the TAP testsuite driver is no longer
+    installed in the Automake's scripts directory, and is instead just
+    distributed as a "contrib" addition.  There should be no reason to
+    use this implementation anyway in real packages, since the awk+shell
+    implementation of the TAP driver (that is documented in the manual)
+    is more portable and has feature parity with the perl implementation.
+
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 New in 1.14.1:
diff --git a/lib/tap-driver.pl b/contrib/tap-driver.pl
similarity index 98%
rename from lib/tap-driver.pl
rename to contrib/tap-driver.pl
index aca65fe..e7e581d 100755
--- a/lib/tap-driver.pl
+++ b/contrib/tap-driver.pl
@@ -32,7 +32,7 @@ use strict;
 use Getopt::Long ();
 use TAP::Parser;
 
-my $VERSION = '2012-02-01.19'; # UTC
+my $VERSION = '2013-12-24.15'; # UTC
 
 my $ME = "tap-driver.pl";
 
@@ -43,13 +43,13 @@ Usage:
              [--enable-hard-errors={yes|no}] [--ignore-exit]
              [--diagnostic-string=STRING] [--merge|--no-merge]
              [--comments|--no-comments] [--] TEST-COMMAND
-The `--test-name', `--log-file' and `--trs-file' options are mandatory.
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
 END
 
 my $HELP = "$ME: TAP-aware test driver for Automake testsuite harness." .
            "\n" . $USAGE;
 
-# Keep this in sync with `lib/am/check.am:$(am__tty_colors)'.
+# Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
 my %COLOR = (
   red => "\e[0;31m",
   grn => "\e[0;32m",
@@ -208,7 +208,6 @@ TEST_RESULTS :
     return grep { not $_ eq "PASS" } (keys %test_results_seen);
   }
 
-  # FIXME: this can certainly be improved ...
   sub get_global_test_result ()
   {
     return "ERROR"
@@ -465,7 +464,7 @@ sub extract_tap_comment ($)
   my $line = shift;
   if (index ($line, $diag_string) == 0)
     {
-      # Strip leading `$diag_string' from `$line'.
+      # Strip leading '$diag_string' from '$line'.
       $line = substr ($line, length ($diag_string));
       # And strip any leading and trailing whitespace left.
       $line =~ s/(?:^\s*|\s*$)//g;
diff --git a/doc/automake.texi b/doc/automake.texi
index cd33ad7..74a4101 100644
--- a/doc/automake.texi
+++ b/doc/automake.texi
@@ -9742,7 +9742,7 @@ echo ok 1
 # Exit with error, even if all the tests have been successful.
 exit 7
 
-% @kbd{cp @var{PREFIX}/share/automake-@var{APIVERSION}/tap-driver.pl .}
+% @kbd{cp @var{PREFIX}/share/automake-@var{APIVERSION}/tap-driver.sh .}
 % @kbd{autoreconf -vi && ./configure && make check}
 ...
 PASS: foo.test 1 - Swallows fly
diff --git a/gen-testsuite-part b/gen-testsuite-part
index 3bd5c9f..5bd1b4e 100755
--- a/gen-testsuite-part
+++ b/gen-testsuite-part
@@ -241,20 +241,6 @@ my %test_generators =
         shell_setup_code =>
           'am_test_prefer_config_shell=yes',
       },
-    #
-    # Tests on tap support should be run with both the perl and awk
-    # implementations of the TAP driver (they run with the awk one
-    # by default).
-    #
-    perl_tap_driver =>
-      {
-        line_matcher =>
-          qr<(?:\bfetch_tap_driver\b|[\s/]tap-setup\.sh\b)>,
-        line_rejecter =>
-          qr/\bam_tap_implementation=/,
-        shell_setup_code =>
-          'am_tap_implementation=perl',
-      },
   );
 
 #--------------------------------------------------------------------------
diff --git a/lib/Makefile.inc b/lib/Makefile.inc
index d1971f5..8eed303 100644
--- a/lib/Makefile.inc
+++ b/lib/Makefile.inc
@@ -40,8 +40,7 @@ dist_script_DATA = \
   %D%/py-compile \
   %D%/ar-lib \
   %D%/test-driver \
-  %D%/tap-driver.sh \
-  %D%/tap-driver.pl
+  %D%/tap-driver.sh
 
 install-data-hook:
 	@$(POST_INSTALL)
diff --git a/t/ax/am-test-lib.sh b/t/ax/am-test-lib.sh
index 26e58ef..cee5c8d 100644
--- a/t/ax/am-test-lib.sh
+++ b/t/ax/am-test-lib.sh
@@ -583,17 +583,31 @@ count_test_results ()
 # of /bin/sh.
 get_shell_script ()
 {
-  test ! -f "$1" || rm -f "$1" || return 99
+  am_source=$1 am_target=${2-$1}
+  test ! -f "$am_target" || rm -f "$am_target" || return 99
   if test x"$am_test_prefer_config_shell" = x"yes"; then
-    sed "1s|#!.*|#! $SHELL|" "$am_scriptdir/$1" > "$1" \
-     && chmod a+x "$1" \
+    sed "1s|#!.*|#! $SHELL|" "$am_scriptdir/$am_source" > "$am_target" \
+     && chmod a+x "$am_target" \
      || return 99
   else
-    cp -f "$am_scriptdir/$1" . || return 99
+    cp -f "$am_scriptdir/$am_source" "$am_target" || return 99
   fi
-  sed 10q "$1" # For debugging.
+  sed 10q "$am_target" # For debugging.
+  unset am_target am_source
 }
 
+# fetch_tap_driver
+# ----------------
+# Fetch the Automake-provided TAP driver from the 'lib/' directory into
+# the current directory, and edit its shebang line so that it will be
+# run with the proper shell.
+fetch_tap_driver ()
+{
+  AM_TAP_AWK=$AWK; export AM_TAP_AWK
+  get_shell_script tap-driver.sh tap-driver
+}
+
+
 # require_xsi SHELL
 # -----------------
 # Skip the test if the given shell fails to support common XSI constructs.
@@ -612,35 +626,6 @@ xsi_shell_code='
     && eval '\''test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5'\'
 
-# fetch_tap_driver
-# ----------------
-# Fetch the Automake-provided TAP driver from the 'lib/' directory into
-# the current directory, and edit its shebang line so that it will be
-# run with the perl interpreter determined at configure time.
-fetch_tap_driver ()
-{
-  # TODO: we should devise a way to make the shell TAP driver tested also
-  # TODO: with /bin/sh, for better coverage.
-  case $am_tap_implementation in
-    # Extra quoting required to avoid maintainer-check spurious failures.
-   'perl')
-      $PERL -MTAP::Parser -e 1 \
-        || skip_all_ "cannot import TAP::Parser perl module"
-      sed "1s|#!.*|#! $PERL -w|" "$am_scriptdir"/tap-driver.pl >tap-driver
-      ;;
-    shell)
-      AM_TAP_AWK=$AWK; export AM_TAP_AWK
-      sed "1s|#!.*|#! $SHELL|" "$am_scriptdir"/tap-driver.sh >tap-driver
-      ;;
-    *)
-      fatal_ "invalid \$am_tap_implementation '$am_tap_implementation'" ;;
-  esac \
-    && chmod a+x tap-driver \
-    || framework_failure_ "couldn't fetch $am_tap_implementation TAP driver"
-  sed 10q tap-driver # For debugging.
-}
-am_tap_implementation=${am_tap_implementation-shell}
-
 # $PYTHON and support for PEP-3147.  Needed to check our python-related
 # install rules.
 python_has_pep3147 ()
diff --git a/t/tap-bad-prog.tap b/t/tap-bad-prog.tap
index 490cd4a..9225c38 100644
--- a/t/tap-bad-prog.tap
+++ b/t/tap-bad-prog.tap
@@ -73,35 +73,13 @@ else
 fi
 
 # Check that no spurious test result is reported.  This is lower-priority
-# (and in fact the check currently fails for our awk-based driver).
-directive=
-if test $am_tap_implementation = shell; then
-  directive=TODO
-else
-  # Older versions of IPC::Open3 (e.g., version 1.05 on perl 5.12.4 or
-  # version 1.0103 on perl 5.6.2) fail to properly trap errors in exec(2)
-  # calls in the child process; hence, the TAP driver cannot be properly
-  # informed of such error.
-  if $PERL -w -e '
-    use IPC::Open3 qw/open3/;
-    $@ = "";
-    eval { open3(*STDIN, *STDOUT, *STDERR, "am--no-such-command") };
-    $@ =~ m/\bopen3:.*am--no-such-command/
-      or die "Bad \$@ value: \"$@\"\n";
-  '; then
-    : # OK. IPC::Open3 should be good enough.
-  else
-    for s in '"missing plan" message' 'results'; do
-      skip_ -r "IPC::Open3 not good enough" "no spurious $s"
-    done
-    exit 0
-  fi
-fi
+# (and in fact the check currently fails).
 
 command_ok_ 'no spurious "missing plan" message' \
-    -D "$directive" -- not grep 'missing.* plan' stdout
+  -D TODO -- not grep 'missing.* plan' stdout
+
 command_ok_ 'no spurious results' \
-  -D "$directive" -r 'still get "missing plan"' \
+  -D TODO -r 'still get "missing plan"' \
   count_test_results total=3 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=3
 
 :
diff --git a/t/tap-bailout-leading-space.sh b/t/tap-bailout-leading-space.sh
index 120ae03..7a55a1f 100644
--- a/t/tap-bailout-leading-space.sh
+++ b/t/tap-bailout-leading-space.sh
@@ -14,15 +14,10 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Older versions of prove and TAP::Harness (e.g., 3.17) didn't recognize
-# a "Bail out!" directive that was preceded by whitespace, but more modern
-# versions (e.g., 3.23) do.  So we leave this behaviour undefined for the
-# perl implementation of the Automake TAP driver, but expect the latter,
-# "more modern" behaviour in our awk TAP driver.
+# A "Bail out!" directive that is preceded by whitespace should still
+# be recognized.
 
-am_tap_implementation=shell
 . test-init.sh
-
 . tap-setup.sh
 
 cat > a.test <<END
diff --git a/t/tap-signal.tap b/t/tap-signal.tap
index f1a8130..70fe5c1 100644
--- a/t/tap-signal.tap
+++ b/t/tap-signal.tap
@@ -93,13 +93,8 @@ signal_caught ()
   esac
   wbound_re="($|[^a-zA-Z0-9_-])"
   pfx_re="^ERROR: signal-$numeric\\.test"
-  case $am_tap_implementation in
-    # Dummy escape to please maintainer-check.
-    per\l) rx="$pfx_re - terminated by signal $sig_re$";;
-    shell) rx="$pfx_re .*terminated by signal $sig_re$wbound_re";;
-    *) fatal_ "invalid \$am_tap_implementation '$am_tap_implementation'";;
-  esac
-  desc="TAP driver catch test termination by signal SIG$symbolic"
+  rx="${pfx_re} .*terminated by signal ${sig_re}${wbound_re}"
+  desc="TAP driver catch test termination by signal SIG${symbolic}"
   case " $blocked_signals " in
     *" $numeric "*) skip_ -r "SIG$symbolic is blocked" "$desc" ;;
     *) command_ok_ "$desc" env LC_ALL=C $EGREP "$rx" stdout ;;
diff --git a/t/tap-test-number-0.sh b/t/tap-test-number-0.sh
index b5b161b..d447ebe 100644
--- a/t/tap-test-number-0.sh
+++ b/t/tap-test-number-0.sh
@@ -19,30 +19,6 @@
 # This is consistent with the behaviour of the 'prove' utility.
 
 . test-init.sh
-
-if test $am_tap_implementation = perl; then
-  $PERL -MTAP::Parser -e 1 \
-    || skip_ "cannot import TAP::Parser perl module"
-  if $PERL -w -e '
-    use warnings FATAL => "all"; use strict;
-    use TAP::Parser;
-    my $parser = TAP::Parser->new({tap => "1..1\n" . "ok 0\n"});
-    my $result = $parser->next;
-    $result->is_plan or die "first line is not TAP plan";
-    $result = $parser->next;
-    $result->is_test or die "second line is not TAP test result";
-    my $testno = $result->number;
-    $parser->next and die "unexpected further TAP stream";
-    exit ($testno == 0 ? 0 : 77);
-  '; then
-    : # Nothing to do.
-  elif test $? -eq 77; then
-    skip_ 'TAP::Parser bug: test number 0 gets relabelled as 1'
-  else
-    fatal_ "error analyzing TAP::Parser module for bugs"
-  fi
-fi
-
 . tap-setup.sh
 
 cat > a.test <<END
diff --git a/t/test-driver-cond.sh b/t/test-driver-cond.sh
index febb9d2..9b50b1c 100644
--- a/t/test-driver-cond.sh
+++ b/t/test-driver-cond.sh
@@ -22,8 +22,8 @@
 
 cp "$am_testaux_srcdir"/trivial-test-driver . \
   || fatal_ "failed to fetch auxiliary script trivial-test-driver"
-cp "$am_scriptdir"/tap-driver.pl . \
-  || fatal_ "failed to fetch auxiliary script tap-driver.pl"
+cp "$am_scriptdir"/tap-driver.sh . \
+  || fatal_ "failed to fetch auxiliary script tap-driver.sh"
 
 cat >> configure.ac << END
 AM_CONDITIONAL([COND1], [:])
@@ -40,7 +40,7 @@ $AUTOCONF
 
 cat > Makefile.am << 'END'
 TESTS = foo bar.test baz.sh
-EXTRA_DIST = $(TESTS) tap-driver.pl trivial-test-driver
+EXTRA_DIST = $(TESTS) tap-driver.sh trivial-test-driver
 TEST_EXTENSIONS = .test .sh
 LOG_DRIVER =
 SH_LOG_DRIVER = $(tap_rulez)
@@ -49,7 +49,7 @@ LOG_DRIVER += @my_LOG_DRIVER@
 if COND2
 tap_rulez = false
 else !COND2
-tap_rulez = $(PERL) $(srcdir)/tap-driver.pl
+tap_rulez = $(PERL) $(srcdir)/tap-driver.sh
 endif !COND2
 endif COND1
 END
-- 
1.8.5.rc0.23.gaa27064