Re: driving 2 displays

> Am 27.08.2012 10:09, schrieb Usagi Yojimbo:
> > Hi, [...] Currently both displays show the same screens, limiting
> > the sizes of the screens to the smaller display's size. I'm looking
> > for a way to drive them separately, as if it were one display E.G.
> > with a size of 4×16. Is there a way to do this?
> 
> You can use two instances of LCDd, one for each display. Of course
> they need to listen for clients on different TCP-ports and you need to
> tell every client to which port to connect (means: on which LCD it
> should be displayed).
> 
> Best regards,
> 	Jannis

Hi,

Yes, that is one way to do it.
But as I wrote it, I want to use them as one, double sized screen. Like this: 2×16 + 2×16 = 4×16…
I also want to use them, with a single client, that is not capable to use 2 displays, but can handle more than 2 lines.

Usagi


_______________________________________________
LCDproc mailing list
[email protected]
http://lists.omnipotent.net/mailman/listinfo/lcdproc