Re: Patch adds support for the Adafruit PiPlate

Hi Jon,

thank you for your submission. You don't need to resubmit patches
(unless it doesn't show up in the mailing list archive). They are
reviewed if I have some spare time.

Regards,
Markus

On 25.03.2013 14:18, Jonathan Brogdon wrote:
> Never saw a response on the corrected patch for the Adafruit PiPlate.
>  Resubmitting.
>
> Jon
>
> ---------- Forwarded message ----------
> From: *Jonathan Brogdon* <[email protected]
> <mailto:[email protected]>>
> Date: Mon, Feb 18, 2013 at 9:34 AM
> Subject: [Lcdproc] Patch adds support for the Adafruit PiPlate
> To: [email protected] <mailto:[email protected]>
>
>
> You are correct regarding the blue backlight pin.  I've fixed the
> code, and attached a new patch.
>
> Jon
>
>
> On Tue, Feb 12, 2013 at 1:29 AM, Markus Dolze <[email protected]
> <mailto:[email protected]>> wrote:
>
>     On 11.02.2013 22:32, Jonathan Brogdon wrote:
>     > Never saw this on the mailing list, or a response.  Re-sending.
>     >
>     > Jon
>     >
>     > ---------- Forwarded message ----------
>     > From: *Jonathan Brogdon* <[email protected]
>     <mailto:[email protected]>
>     > <mailto:[email protected] <mailto:[email protected]>>>
>     > Date: Sat, Feb 9, 2013 at 1:26 AM
>     > Subject: [PATCH] Add support for the Adafruit PiPlate
>     > To: [email protected]
>     <mailto:[email protected]>
>     <mailto:[email protected]
>     <mailto:[email protected]>>
>     >
>     >
>     > For your consideration, I have attached a v0.5.6 patch which adds a
>     > driver for the Adafruit PiPlate (http://adafruit.com/products/1109).
>     >  The PiPlate includes a HD44780 LCD and 5 button keys which is
>     > accessed via a MCP23017 I2C IO expander.
>     >
>     > The driver was adapted from the HD44780-i2c driver, which uses the
>     > PCF8574 I2C IO expander.
>     >
>     > Jon Brogdon
>     >
>
>     Hi,
>
>     please read [1]. Thank you.
>
>     [1] http://lcdproc.sourceforge.net/docs/current-dev.html#code-style
>
>     According to the schematic from [1], the pin for blue backlight is on
>     GPB0, not on GPA8 (which does not exist anyway).
>
>     Is the schematic wrong or did I miss something?
>
>     [2]
>     http://learn.adafruit.com/system/assets/assets/000/003/861/original/pilcdplate.png?1360171818
>
>     Regards,
>     Markus
>
>     _______________________________________________
>     LCDproc mailing list
>     [email protected] <mailto:[email protected]>
>     http://lists.omnipotent.net/mailman/listinfo/lcdproc
>
>
>
>
>
>
> _______________________________________________
> LCDproc mailing list
> [email protected]
> http://lists.omnipotent.net/mailman/listinfo/lcdproc