Superflower SF-610 Infodisplay with Linux

Hello

i have the Display named above and i want to get it up with Linux but i 
can not find the right driver for it - and find myself unable to build 
it on my own. Can anyone help me with that?

The Display has fixed Symbols with direct attached sensors 
(temp1-3,Fan1-3,HD-Led) it shows without work. It seems it is also 
possible to read the sensor-readings with lm-sensors, but i can't find 
the right way here too.
But it has also numberblocks (actuall zero'd) for Date, Time, 
Screen-Resolution, Volume, Network and some more. These i want to get to 
work with lcdproc.

It is connected internally via USB and my Ubuntu 12.04-4 LTS shows this:


root@compix:~# lsusb -vd c4e3:2733

Bus 003 Device 002: ID c4e3:2733
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0xc4e3
   idProduct          0x2733
   bcdDevice            1.00
   iManufacturer           1 ANDYSON
   iProduct                2 ADS-043
   iSerial                 0
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xc0
       Self Powered
     MaxPower              200mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      0 No Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.00
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      46
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval             100
Device Status:     0x0000
   (Bus Powered)
root@compix:~#

Any ideas how i can make it work?

Thanks.
  Kay
_______________________________________________
LCDproc mailing list
[email protected]
http://lists.omnipotent.net/mailman/listinfo/lcdproc

Unsubscribe from this list:
http://lists.omnipotent.net/mailman/options/lcdproc/gcsl-lcdproc-496%40gmane.org?password=496&unsub=1&unsubconfirm=1