Re: how to see what hylafax is doing.. live

for example with efax, when I give the command to send fax, I get this output (so I can make my log file, for example number.log)while using sendfax (hylafax client) I don't get the log as thisafter the fax has been sent I have to go in /var/spool/log/c....... and /var/spool/doneq/q...mix them and put all in a file, for example number.logI'd prefer sendfax to show log directlyI run sendfax in this way:sendfax  -w -G -B 9600 -t 1 -T 1 -vv -n -d 06.... file.tif


efax live log example:
efax: Mon Nov  2 16:18:06 2015 efax v 0.9a-001114 Copyright 1999 Ed Casasefax: Mon Nov  2 16:18:06 2015 efax v 0.9a-001114 Copyright 1999 Ed Casasefax: 18:06 compiled Jan 25 2006 02:18:03efax: 18:06 page 1 : file.fax + 0 : 1728x2287 @ 204x196 dpi FAX/FAXefax: 18:06 argv[0]=efaxefax: 18:06 argv[1]=-vefax: 18:06 argv[2]=ewinchmartfxefax: 18:06 argv[3]=-defax: 18:06 argv[4]=/dev/ttyS1efax: 18:06 argv[5]=-cefax: 18:06 argv[6]=1,3,0,0,0,0,0,0efax: 18:06 argv[7]=-hefax: 18:06 argv[8]= efax: 18:06 argv[9]=-tefax: 18:06 argv[10]=T06xxxxxxxxefax: 18:06 argv[11]=file.faxefax: 18:06 opened /dev/ttyS1efax: 18:06 command  "Q0V1"efax: 18:06 waiting 2.0 sefax: 18:06 .245 [<CR><LF>OK<CR><LF>]efax: 18:06 response "OK"efax: 18:06 command  "E0"efax: 18:06 waiting 5.0 sefax: 18:06 .354 [<CR><LF>OK<CR><LF>]efax: 18:06 response "OK"efax: 18:06 command  "I3"efax: 18:06 waiting 5.0 sefax: 18:06 .472 [<CR><LF>V2.200-K56_DLS<CR><LF>]efax: 18:06 .472 [<CR><LF>OK<CR><LF>]efax: 18:06 response "OK"efax: 18:06 command  "+FCLASS=?"efax: 18:06 waiting 5.0 sefax: 18:06 .591 [<CR><LF>0,1,1.0<CR><LF>]efax: 18:06 .591 [<CR><LF>OK<CR><LF>]efax: 18:06 response "OK"efax: 18:06 command  "+FCLASS=1"efax: 18:06 waiting 5.0 sefax: 18:06 .703 [<CR><LF>OK<CR><LF>]efax: 18:06 response "OK"efax: 18:06 using V2.200-K56_DLS in class 1efax: 18:06 dialing T06.....efax: 18:06 command  "DT06......"efax: 18:06 waiting 120.0 sefax: 18:33 .126 [<CR><LF>CONNECT<CR><LF>]efax: 18:33 response "CONNECT"efax: 18:33 connectedefax: 18:33 waiting 2.0 sefax: 18:33 .195 [<CR><LF>ERROR<CR><LF>]efax: 18:33 response "ERROR"efax: 18:33 Warning: frame errorefax: 18:33 received 2 bytes: 32 bcefax: 18:33 received UNKNOWNefax: 18:33 command  "+FRH=3"efax: 18:33 waiting 35.0 sefax: 18:33 .211 [<CR><LF>NO CARRIER<CR><LF>]efax: 18:33 response "NO CARRIER"efax: 18:33 received 2 bytes: 32 bcefax: 18:33 received UNKNOWNefax: 18:33 command  "+FRH=3"efax: 18:33 waiting 35.0 sefax: 18:33 .966 [<CR><LF>CONNECT<CR><LF>]efax: 18:33 response "CONNECT"efax: 18:34 waiting 2.0 sefax: 18:34 .913 [<CR><LF>OK<CR><LF>]efax: 18:34 response "OK"efax: 18:34 received 12 bytes:efax: 18:34  ff 03 20 00 00 00 00 00 00 00 39 23efax: 18:34 received UNKNOWNefax: 18:34 Warning: bit-reversed HDLC frame, reversing bit orderefax: 18:34 command  "+FRH=3"efax: 18:34 waiting 35.0 sefax: 18:34 .928 [<CR><LF>CONNECT<CR><LF>]efax: 18:34 response "CONNECT"efax: 18:35 waiting 2.0 sefax: 18:35 .603 [<CR><LF>OK<CR><LF>]efax: 18:35 response "OK"efax: 18:35 received 25 bytes:efax: 18:35  ff c0 02 1c ec 4c 8c ac 04 ac cc ac 0c 04 04 04efax: 18:35  04 04 04 04 04 04 04 4b ffefax: 18:35 received CSI - answering IDefax: 18:35 remote ID ->           06...................efax: 18:35 command  "+FRH=3"efax: 18:35 waiting 35.0 sefax: 18:35 .618 [<CR><LF>CONNECT<CR><LF>]efax: 18:35 response "CONNECT"efax: 18:36 waiting 2.0 sefax: 18:36 .303 [<CR><LF>OK<CR><LF>]efax: 18:36 response "OK"efax: 18:36 received 15 bytes:efax: 18:36  ff c8 01 00 73 15 01 01 cb c1 01 01 00 66 0fefax: 18:36 received DIS - answering capabilitiesefax: 18:36 remote has no document(s) to send, and can receiveefax: 18:36 local   196lpi  9600bps 8.5"/215mm 11"/A4 1D    -     -  0msefax: 18:36 remote  196lpi  9600bps 8.5"/215mm  any   2D    -     -  10msefax: 18:36 session 196lpi  9600bps 8.5"/215mm  any   1D    -     -  10msefax: 18:36 command  "+FTH=3"efax: 18:36 waiting 3.1 sefax: 18:36 .358 [<CR><LF>CONNECT<CR><LF>]efax: 18:36 response "CONNECT"efax: 18:36 sent 23 bytes:efax: 18:36  ff c0 c2 04 04 04 04 04 04 04 04 04 04 04 04 04efax: 18:36  04 04 04 04 04 04 04efax: 18:36 sent TSI - caller IDefax: 18:36 waiting 13.6 sefax: 18:38 .143 [<CR><LF>CONNECT<CR><LF>]efax: 18:38 response "CONNECT"efax: 18:38 sent 6 bytes: ff c8 c1 00 62 14efax: 18:38 sent DCS - session formatefax: 18:38 waiting 13.6 sefax: 18:38 .584 [<CR><LF>OK<CR><LF>]efax: 18:38 response "OK"efax: 18:38 command  "+FTM=96"efax: 18:38 waiting 3.1 sefax: 18:38 .697 [<CR><LF>CONNECT<CR><LF>]efax: 18:38 response "CONNECT"efax: 18:38 waiting 30.0 sefax: 18:40 .654 [<CR><LF>OK<CR><LF>]efax: 18:40 response "OK"efax: 18:40 sent TCF - channel check of 1800 bytesefax: 18:40 command  "+FRS=1"efax: 18:40 waiting 3.0 sefax: 18:40 .713 [<CR><LF>OK<CR><LF>]efax: 18:40 response "OK"efax: 18:40 command  "+FRH=3"efax: 18:40 waiting 3.0 sefax: 18:42 .136 [<CR><LF>CONNECT<CR><LF>]efax: 18:42 response "CONNECT"efax: 18:43 waiting 2.0 sefax: 18:43 .073 [<CR><LF>OK<CR><LF>]efax: 18:43 response "OK"efax: 18:43 received 5 bytes: ff c8 21 57 beefax: 18:43 received CFR - channel OKefax: 18:43 command  "+FTM=96"efax: 18:43 waiting 3.1 sefax: 18:43 .133 [<CR><LF>CONNECT<CR><LF>]efax: 18:43 response "CONNECT"efax: 18:44 padding to 12 bytes/scan line.efax: 18:44 header:[ ]efax: 19:23 waiting 30.0 sefax: 19:30 .062 [<CR><LF>OK<CR><LF>]efax: 19:30 response "OK"efax: 19:30 sent 20+2200 lines, 53857+1225 bytes, 46 s  9579 bpsefax: 19:30 command  "+FTH=3"efax: 19:30 waiting 3.1 sefax: 19:30 .168 [<CR><LF>CONNECT<CR><LF>]efax: 19:30 response "CONNECT"efax: 19:30 sent 3 bytes: ff c8 f4efax: 19:30 sent EOP - doneefax: 19:30 waiting 13.6 sefax: 19:31 .479 [<CR><LF>OK<CR><LF>]efax: 19:31 response "OK"efax: 19:31 command  "+FRH=3"efax: 19:31 waiting 3.0 sefax: 19:32 .944 [<CR><LF>CONNECT<CR><LF>]efax: 19:32 response "CONNECT"efax: 19:33 waiting 2.0 sefax: 19:33 .921 [<CR><LF>OK<CR><LF>]efax: 19:33 response "OK"efax: 19:33 received 5 bytes: ff c8 31 45 8fefax: 19:33 received MCF - page OKefax: 19:33 sent -> perduto.faxefax: 19:33 command  "+FTH=3"efax: 19:33 waiting 3.1 sefax: 19:33 .976 [<CR><LF>CONNECT<CR><LF>]efax: 19:33 response "CONNECT"efax: 19:33 sent 3 bytes: ff c8 5fefax: 19:33 sent DCN - disconnectefax: 19:33 waiting 13.6 sefax: 19:35 .289 [<CR><LF>OK<CR><LF>]efax: 19:35 response "OK"efax: 19:35 command  "H"efax: 19:35 waiting 5.0 sefax: 19:35 .905 [<CR><LF>OK<CR><LF>]efax: 19:35 response "OK"efax: 19:36 command  "Q0V1"efax: 19:36 waiting 2.0 sefax: 19:36 .015 [<CR><LF>OK<CR><LF>]efax: 19:36 response "OK"efax: 19:36 command  "H"efax: 19:36 waiting 5.0 sefax: 19:36 .123 [<CR><LF>OK<CR><LF>]efax: 19:36 response "OK"efax: 19:36 done, returning 0 (success)
 


     Il Lunedì 2 Novembre 2015 15:56, Bodo Meissner <[email protected]> ha scritto:
   

 
Zitat von Antonio Lapira <[email protected]>:
[...]
> I wanted the output directly at the monitor
> something like efax 

What exactly do you want to see? (What is "something like efax"?)

Maybe you can configure your syslog to extract the messages you are  
interested in and write them to a special destination.

Or write a (shell/perl/whatever) script that calls commands like  
faxstat and formats/filters the output as you like.

Bodo