Re: Hylafax+-5.5.9 & blocked queues of the same outbound fax number

I am glad that you've got it resolved.

I'm not sure where the problem is that you experienced, though.

Thanks,

Lee.


On 08/01/2018 11:05 AM, Gregory P. Ennis wrote:
> Lee,
>
> I modified the /var/spool/hylafax/etc/config file to :
>
> LogFacility:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0daemon
> CountryCode:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A01
> AreaCode:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0972
> LongDistancePrefix:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A01
> InternationalPrefix:=C2=A0=C2=A0=C2=A0=C2=A0011
> DialStringRules:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0etc/dia=
lrules
> NotifyCmd:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0bin/notify-smile
> ServerTracing:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A00xFFF
> MaxConcurrentCalls:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A060
> MaxBatchJobs:=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A01
>
>
> After this modification the problems were resolved.
>
> It is interesting that the remote fax that our system was faxing to
> apparently had multiple fax lines for the same receiving number.  With
> these changes hylafax sent faxes out from both of our outbound faxes to
> the number
>
> Thank you very much for your help!!
>
> Greg


____________________ HylaFAX(tm) Users Mailing List _____________________=
__
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.c=
gi
 On UNIX: mail -s unsubscribe [email protected] < /dev/nu=
ll
  *To learn about commercial HylaFAX(tm) support, mail [email protected].*