video calls not connecting to more than 500Kbps through gnugk.

Hello everybody,

My setup on using gnugk is:
- about 20 Cisco TelePresence terminals ­ each registering as terminals with
1 e164 id to the gnugk;
- a cluster of Cisco TelePresence Content Server (that records video content
and does live feeds) - registered as a gateway with 2 prefixes (one for live
feed and one for recording streams).

The GK does not to proxy, no routed mode, no h245 routed mode, no
autorization, nothing.
A simple gatekeeper to keep them all in the same place.

I migrated from using the gatekeeper option from a Cisco MCU to GnuGK.

Ever since I do that, all calls do not connect to more than 500Kbps, even if
when I initiate the call I set the speed of 4000Kbps to a call.

It is to be noted that the options in the gatekepeer.ini are:
TotalBandwidth=100000000

MinimumBandwidthPerCall=2048

MaximumBandwidthPerCall=10000


And also, when I do a printcurrentcallsverbose ­ the calls says its
connected to 10000 Š
Although the server says the terminal asks for 500Kbps speed.

Any ideas? :)

Thanks!

------------------------------------------------------------------------------

_______________________________________________________

Posting: mailto:[email protected]
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/