Re: GnuGk dial extension

Hi Sergey,

when your endpoint is registered and dials 123#[email protected],
it will probably send it as a URL to GnuGk and you need to have
the proper routing policies in places to send it to your MCU.

I'd really suggest you do a trace to see if the calls gets a forwarded
(and if the called number still contains the room) or if it already
fails in GnuGk. Thats much better than speculating.

The "dialing process" is called "routing" in the GnuGk manual and
chapter 6 is entirely devoted to that subject.
http://www.gnugk.org/gnugk-manual-6.html

Regards,
Jan

-- 
Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail  : [email protected]
Website: http://www.gnugk.org
Support: http://www.willamowius.com/gnugk-support.html

Relaxed Communications GmbH
Frahmredder 91
22393 Hamburg
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584

Sergey Zhmylove wrote:
> Hi Jan,
> 
> Thank for your reply!
> Couldn't you correct me please:
> 
> My Cisco SX-80 client registered with number 80 on GnuGk.
> I'm daling 123#[email protected].
> Is client dials prefix 123 with room 456 on the server 200.200.200.200 ?
> 
> Trace level 5 (or above, I'm not currently near the codec) shows that 
> first part (before '@') is excluded and call goes to 200.200.200.200.
> But instantly codec shows like a "Dial ended" message.
> Actually, scheme "123#@200.200.200.200" works via direct connection 
> (when I gives a codec an external IP).
> And it's a synonym for:
> a. dial 200.200.200.200;
> b. press 123# on the SX-80 dialpad/keyboard.
> 
> So can I simulatie dialpad keypresses using GnuGk as a gatekeeper?
> Or implement any other workarounds?
> 
> I just can't get an idea about dialing process and the documentation is 
> slightly "silent".
> 
> And the last question (sorry for a lot of them): are the dialedDigits 
> and "the part before @" the same things?
> 
> Best regards,
> Sergey.
> 
> 03.03.2016 19:49, Jan Willamowius пишет:
> > Hi Sergey,
> >
> > GnuGk treats # just like any other digit. When your conference server
> > is eg. registered to receive prefix 1 and you dial 123#456, it should
> > receive the dialed number including the room (#456).
> >
> > I would suggest you check a GnuGk level 5 trace or a Wireshark capture
> > what GnuGk forwards to the conference server and maybe adapt your
> > routing rules.
> >
> > Regards,
> > Jan

------------------------------------------------------------------------------
_______________________________________________________

Posting: mailto:[email protected]
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/