Re: Help - config or network issue

Hi Maarten,

this looks like a config issue: Start with the etc/gnugk.ini config file
from your GnuGk download archive and make sure GnuGk proxies all
traffic between public and private IPs.

Regards,
Jan
 =

-- =

Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail  : [email protected]
Website: https://www.gnugk.org
Support: https://www.willamowius.com/gnugk-support.html

Relaxed Communications GmbH
Frahmredder 91
22393 Hamburg
Gesch=E4ftsf=FChrer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584


Maarten Dekker wrote:
> Hi all,
> =

> I am getting a lil lost and not sure where to find the issue.
> Let me first describe the situation.
> =

> I have a small ipv4 subnet which is not having any firewalling so openly
> connected to the internet.
> =

> If I give a tandberg 880 unit a public IP of this subnet I am able to call
> and to be called. But of course I also receive lots of unwanted calls.
> =

> I want to use gnugk as a gatekeeper, but also to make sure not every
> default call just comes in.
> =

> When I use gnugk and I have tried various configs I never am able to
> receive a successfull call on the tandberg unit. There is a connection but
> only the incoming video is shows on the tandberg screen, the tanberg video
> does not come to the other endpoint.
> =

> I have gnugk installed on a raspberry with the following IP config:
> eth0      inet addr:80.127.117.171  Bcast:80.127.117.175
>  Mask:255.255.255.248
> eth0.0   inet addr:192.168.2.1  Bcast:192.168.2.255  Mask:255.255.255.0
> =

> =

> with the following routing table:
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> default         a80-127-117-170 0.0.0.0         UG    202    0        0 e=
th0
> 80.127.117.168  *               255.255.255.248 U     202    0        0 e=
th0
> 192.168.2.0     *               255.255.255.0   U     0      0        0 e=
th0
> =

> The endpoint is having a static address on the 192.168.2.0 network.
> for this network there is no specific router, I assume the raspberry with
> gnugk will deal the the needfull things.
> =

> Can some of you advise me or share a config example?
> I dont think the is a too unique situation.
> =

> Thanks
> =

> Maarten


---------------------------------------------------------------------------=
---
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________________

Posting: mailto:[email protected]
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=3Dopenh323=
gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/