Re: [External] [External] [External] Geo location 18.14.0-rc1 question

Thank you George.

Looking forward to working with the changes.  I will retrieve them when the next release candidate comes out.


A quick question on using variables to pass custom Geo Location settings on via an AMI Originate.


If my AMI originate request looks something like this…
Action: Originate
Channel: PJSIP/[email protected]
Exten: createcall
Context: mycontext
Priority: 1
Timeout: 60000
CallerID: John Smith <8005551234>
Variable: _MY_GEO_COUNTRY=US,_MY_GEO_NATSUB=Florida,_MY_GEO_CITY=Orlando,_MY_GEO_HNO=100,_MY_GEO_RD=Main,_MY_GEO_STS=Street
Async: true

Do I need to program the location_variables in the profile like this?

[1]
type = profile
pidf_element = device
profile_action = discard_incoming
usage_rules = retransmission_allowed=yes
location_variables = country=${_MY_GEO_COUNTRY}
location_variables = A1=${_MY_GEO_NATIONAL_SUBDIVISION}
location_variables = A2=${_MY_GEO_NATSUB}
location_variables = A3=${_MY_GEO_CITY}
location_variables = HNO=${_MY_GEO_HNO}
location_variables = RD=${_MY_GEO_RD}
location_variables = STS=${_MY_GEO_STS}
location_variables = PC=${_MY_GEO_PC}

Or would I need to program the location_info_refinements in the profile to use those variables?

Dan


From: asterisk-users <[email protected]> On Behalf Of George Joseph
Sent: Wednesday, August 10, 2022 8:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]>
Subject: Re: [External] [asterisk-users] [External] [External] Geo location 18.14.0-rc1 question

Sorry for the delay but this turned out to be a bit more complex than I anticipated.
There are reviews up on Gerrit for the 16 and 18 branches that address the issues below as well as clean up the implementation, plug some memory leaks, etc.
16: https://gerrit.asterisk.org/c/asterisk/+/18896
18: https://gerrit.asterisk.org/c/asterisk/+/18897

I anticipate these will make it into the next set of release candidates which are due to be cut tomorrow.

Give them a try.

On Wed, Aug 3, 2022 at 1:51 PM George Joseph <[email protected]<mailto:[email protected]>> wrote:
Looks like it'll be tomorrow before I can get the patch up.  I ran into some strange issues.

On Tue, Aug 2, 2022 at 1:43 PM Dan Cropp <[email protected]<mailto:[email protected]>> wrote:
Thank you George

From: asterisk-users <[email protected]<mailto:[email protected]>> On Behalf Of George Joseph
Sent: Tuesday, August 2, 2022 2:40 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]<mailto:[email protected]>>
Subject: Re: [External] [asterisk-users] [External] Geo location 18.14.0-rc1 question



On Tue, Aug 2, 2022 at 1:35 PM George Joseph <[email protected]<mailto:[email protected]>> wrote:


On Tue, Aug 2, 2022 at 1:13 PM Dan Cropp <[email protected]<mailto:[email protected]>> wrote:
Is the allow_routing setting on the geolocation Wiki Profile also not fully implemented?

Well, 99% of the code is there.  The 1% is parsing the config option.  Not sure how I missed that.
I'll have a patch up first thing in the morning UTC-6.
I'll call it "allow_use_for_routing" in profile.

Actually just "allow_routing_use"



In the code, I see geolocation_routing used instead of allow_routing.

Tried both and Asterisk indicates it cannot find suitable setting so it doesn’t create the profile object.

Dan

From: Dan Cropp
Sent: Tuesday, August 2, 2022 10:04 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]<mailto:[email protected]>>
Subject: RE: [External] [asterisk-users] Geo location 18.14.0-rc1 question

Thank you George.

From: asterisk-users <[email protected]<mailto:[email protected]>> On Behalf Of George Joseph
Sent: Tuesday, August 2, 2022 9:57 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]<mailto:[email protected]>>
Subject: Re: [External] [asterisk-users] Geo location 18.14.0-rc1 question



On Tue, Aug 2, 2022 at 8:46 AM Dan Cropp <[email protected]<mailto:[email protected]>> wrote:
I believe I have everything configured correctly, but Asterisk is complaining about my configuration

It is complaining about confidence settings.

From the Asterisk Geolocation Implementation Wiki, I believe I have this set correctly.


Sub-parameters:

  *   value: A percentage indicating the confidence or "unknown".
  *   pdf: "unknown", "normal" or "rectangular"
Example: confidence = value=80, pdf=unknown
If no confidence parameter is specified, the default is 95%.
See RFC7459<https://wiki.asterisk.org/wiki/display/AST/Geolocation+Reference+Information#GeolocationReferenceInformation-rfc7459> for the exact definition of this parameter.


[08/02 09:30:03.724] ERROR[682944] config_options.c: Could not find option suitable for category 'IS_loc_1' named 'confidence' at line 12 of
[08/02 09:30:03.724] ERROR[682944] res_sorcery_config.c: Could not create an object of type 'location' with id 'IS_loc_1' from configuration file 'geolocation.conf'

[IS_loc_1]
type = location
format = civicAddress
confidence = value=95, pdf=unknown
location_info = country=US,A1=Wisconsin,A3=Madison
location_info = HNO=4800,RD=Main,STS=Drive,PC=53704

Remove the confidence param for now.    I documented it before I implemented it. :)



Also seeing problems with location_refinement setting.
Again, I believe my setting matches what is on the Asterisk Geolocation Implementation wiki.

[08/02 09:30:03.724] ERROR[682944] config_options.c: Could not find option suitable for category 'IS_prof_20' named 'location_refinement' at line 56 of
[08/02 09:30:03.724] ERROR[682944] res_sorcery_config.c: Could not create an object of type 'profile' with id 'IS_prof_20' from configuration file 'geolocation.conf'

[IS_prof_20]
type = profile
profile_action = prefer_incoming
pidf_element = person
usage_rules = retransmission_allowed=no
location_reference = IS_loc_22
location_refinement = ROOM=292
location_refinement = FLR=1

Pffft.  I renamed this to "location_info_refinement" to better match the "location_info" parameter in the Location object.  I forgot to rename it in the wiki documentation.  If you just change the name it should work.





Dan
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users