clients -n missing hosts?

(I run void btw..)
chronyc (chrony) version 4.2 (+READLINE +SECHASH +IPV6 -DEBUG)

This is a bare metal machine; not a vm.
```
 grep -Ev "^#|^$" /etc/chrony.conf
server 209.51.161.238 iburst
server 216.239.35.0 iburst
server 162.159.200.123 iburst
server 129.134.25.123 iburst
logchange 0.5
driftfile /var/lib/chrony/drift
ntsdumpdir /var/lib/chrony/
rtcsync
makestep 1 -1
minsources 2
local stratum 2
bindaddress 172.16.254.241
allow 172.16.0.0/16
allow 10.20.0.0/16
allow 10.120.0.0/16
```

and

```
 cat /etc/sv/chronyd/run
#!/bin/sh
install -d -m750 -o chrony -g chrony /var/run/chrony
exec chronyd -n -L 1 -f /etc/chrony.conf -u chrony
```

Using dnscrypt-proxy and its cloaking features.. I grab most timeservers (*.
pool.ntp.org, time.windows.com, time.apple.com, time-ios.apple.com, etc.. )
and redirect them to our internal host, presently 172.16.254.241

Using wireshark to show we went to the correct server.. and got time..

[image: image.png]

(great) working..

but

```
 chronyc clients -n | wc -l
3299
```

but where am I?

```
# chronyc clients -n  | grep 10.20.28
10.20.28.33                     1      0   -   -   15h       0      0   -
  -
10.20.28.10                    93      0  10   -   719       0      0   -
  -
```

/flushdns, sync time, /displaydns.. all looks good..

[image: image.png]

Manually toggled/sync'd time on Windows10..

Still not there..

again looks like I made it..

[image: image.png]

and still not there..

I just restarted..

```
 ~# chronyc tracking
                        chronyc sources
                        chronyc sourcestats -v

Reference ID    : 8186197B (time3.facebook.com)
Stratum         : 2
Ref time (UTC)  : Fri May 06 12:29:17 2022
System time     : 0.000049408 seconds fast of NTP time
Last offset     : +0.000076917 seconds
RMS offset      : 0.000076917 seconds
Frequency       : 7.522 ppm fast
Residual freq   : +2.200 ppm
Skew            : 0.125 ppm
Root delay      : 0.005109369 seconds
Root dispersion : 0.000448218 seconds
Update interval : 64.2 seconds
Leap status     : Normal
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^? clock.nyc.he.net              1   6   122   109    -75us[+1643ns] +/-
38ms
^- time1.google.com              1   6    37    51  -1514us[-1514us] +/-
14ms
^- time.cloudflare.com           3   6    37    51   +101us[ +101us] +/-
21ms
^* time3.facebook.com            1   6    37    52  -1539ns[  +75us] +/-
2716us
                             .- Number of sample points in measurement set.
                            /    .- Number of residual runs with same sign.
                           |    /    .- Length of measurement set (time).
                           |   |    /      .- Est. clock freq error (ppm).
                           |   |   |      /           .- Est. error in freq.
                           |   |   |     |           /         .- Est.
offset.
                           |   |   |     |          |          |   On the -.
                           |   |   |     |          |          |   samples.
\
                           |   |   |     |          |          |
  |
Name/IP Address            NP  NR  Span  Frequency  Freq Skew  Offset  Std
Dev
==============================================================================
clock.nyc.he.net            3   3    10     +1.845  74795.320  -1304us
452us
time1.google.com            5   4    71    -25.346    172.602  -2915us
355us
time.cloudflare.com         5   4    71     +4.294     56.624   +319us
243us
time3.facebook.com          5   3    70     +2.200     28.450   +113us
162us
```

(confused how I used IPs but it converts to a name..)

I'm open to suggestions, and greatly appreciate any attention anyone feels
this is worth..

I literally have no problem, but I was stepping through a problem and
looking for something and couldn't find the host..