Re: Chrony problem - not synchronizing time
Miroslav Lichvar <[email protected]>
| Newsgroups | gmane.comp.time.chrony.user |
|---|---|
| Message-ID | <Y0faKDDXaGV/H2Si@localhost> |
On Thu, Oct 13, 2022 at 10:46:41AM +0200, [email protected] wrote: > Hi, > > Attached is a block diagram of our custom hardware and short description how > chorny with gpsd should work. Ok, I assume there is no simple way to provide both sources to chrony over a single serial-USB connection. Can it carry PPS? Assuming the DIGISYNC processor can switch both timing messages and PPS between the GPS and RTC, while not changing significantly the delay of the NMEA messages, I think gpsd and chrony can be configured as if there was only the GPS, as explained in the FAQ: https://chrony.tuxfamily.org/faq.html#_how_should_chronyd_be_configuration_with_gpsd -- Miroslav Lichvar -- To unsubscribe email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org with "unsubscribe" in the subject. For help email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org with "help" in the subject. Trouble? Email [email protected]