Re: Chrony problem - not synchronizing time

How to determine which SOCK driver to use? I want to try with SOCK driver instead of SHM?

All manuals are with S0, S1 ….

Sent from my iPhone

> On 13.10.2022, at 11:28, Miroslav Lichvar <[email protected]> wrote:
> 
> On Thu, Oct 13, 2022 at 10:46:41AM +0200, [email protected] wrote:
>> Hi,
>> 
>> Attached is a block diagram of our custom hardware and short description how
>> chorny with gpsd should work.
> 
> Ok, I assume there is no simple way to provide both sources to chrony
> over a single serial-USB connection. Can it carry PPS? Assuming the
> DIGISYNC processor can switch both timing messages and PPS between the
> GPS and RTC, while not changing significantly the delay of the NMEA
> messages, I think gpsd and chrony can be configured as if there was
> only the GPS, as explained in the FAQ:
> 
> https://chrony.tuxfamily.org/faq.html#_how_should_chronyd_be_configuration_with_gpsd
> 
> -- 
> Miroslav Lichvar
> 
> 
> -- 
> To unsubscribe email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
> with "unsubscribe" in the subject.
> For help email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
> with "help" in the subject.
> Trouble?  Email [email protected]
> 

-- 
To unsubscribe email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
with "unsubscribe" in the subject.
For help email chrony-users-request-kWFZVVI9zxvPqho9SqqRMmD2FQJk+8+b@public.gmane.org 
with "help" in the subject.
Trouble?  Email [email protected]