RE: Having connect problems

Can you re-install SourceSafe on the machine?  It sounds like
it was never fully installed.

Corey

At 11:04 AM 4/5/2004 -0500, Chris White wrote:
>Corey,
>
>I did a search for that file and it doesn't show in a search.  The only
>thing that comes up is rasspi.dll and that is in the WINNT\system32
>directory.  Should I have downloaded the binary version of this, and not
>the one that automatically installs?  I am so confused now.  If I had
>the file you stated I could register it but it is non-existant on this
>machine.
>
>Chris
>
>-----Original Message-----
>From: Corey Steffen [mailto:[email protected]] 
>Sent: Monday, April 05, 2004 9:07 AM
>To: Chris White
>Cc: [email protected]
>Subject: RE: [SOS-LIST] Having connect problems
>
>
>Chris,
>
>NOT the "source gear folder".  The ssapi.dll is in the bin directory of
>the SourceSafe folder (see my initial email below).
>
>Corey
>
>At 05:00 PM 4/2/2004 -0600, Chris White wrote:
>>Ok I looked in program files and then the source gear folder and found 
>>no ssapi.dll file so now what.....
>>
>>-----Original Message-----
>>From: Corey Steffen [mailto:[email protected]]
>>Sent: Friday, April 02, 2004 4:43 PM
>>To: Chris White; Linda Bauer; [email protected]
>>Subject: Re: [SOS-LIST] Having connect problems
>>
>>
>>According to the log file, it appears your SourceSafe Automation 
>>component is not correctly configured on the server machine.  On the 
>>SOS Server machine, go to your SourceSafe installation folder, bin 
>>subdir, and using a command prompt, type "regsvr32 ssapi.dll".
>>
>>As far as crypto key file problems, if your users were previously using
>
>>SOS 3.5, make sure they copy their .key files from their
>>3.5 Client installation paths to their 4.0 Client installation, and on 
>>the server machine, make sure you copy your sossvr.kys file from your
>>3.5 Server installation folder to your 4.0 Server.
>>
>>Corey Steffen
>>SourceGear LLC
>>
>>At 04:34 PM 4/2/2004 -0600, Chris White wrote:
>>>Got a question.  I had the demo version configured correctly and 
>>>working, we recently just bought the Version 4.0 client and I 
>>>conffigured it the same way, but now they are not able to connect for 
>>>some reason.  Can someone please tell me what might be wrong.  I have 
>>>attached the log file and below is what they are seeing when they try 
>>>to
>>>connect:
>>>
>>> Hi Chris,
>>>I am having problems connecting. On port 8890 it says I am missing the
>
>>>rhea.key file for the encryption.  For port 8888 it tells me the 
>>>server
>>
>>>was unable to connect to the sourcesafe database.
>>>-Jason
>>>
>>>
>>>Thanks,
>>>Chris
>>>
>
>
>_______________________________________________
>This is the SourceGear sos-list.
>Send postings to [email protected].
>To unsubscribe or edit your mail options, go to:
>http://lists.sourcegear.com/cgi-bin/mailman/listinfo/sos-list
>and follow the instructions at the bottom of the page.