Re: [CinePaint] Saving files in Cinepaint 22-1

Ok, well, checked my scanner specs . . . up to 48-bits.  Checked Iscan, Photo
image type setting should give me a 24-bit image.  So, now I need to find
where it is in my workflow that I'm dropping to 8-bits.

Suggestions appreciated.

Caruso

carusoswi wrote:
> 
> Thanks for the replies.  I realized almost as soon as I posted that the
> problem is most likely with the format in which the scanner is saving my
> files.  I am playing with Cinepaint so that I can take advantage of higher
> bit-depths with my digital photos and thought I would use it to edit some
> of the film that I'm scanning just for fun.  Compared to Gimp, the
> Cinepaint UI is a bit more complicated, but not that much so after you
> start getting used to it.  Obviously, if I am starting with an 8-bit file,
> there isn't much to be gained from using Cinepaint in lieu of Gimp (except
> the experience with the UI which should make working with 16-bit digital
> files easier  in the future)
> 
> Again, thanks for the replies.  I'm scanning with an Epson Perfection 2400
> so will have to see if it is even capable of 16-bit files, then, if it is,
> I'll check to see if the Linux driver I found for it after a two year
> search is able to instruct it to output in 16-bits.
> 
> There is always some new wrinkle in Linux to figure out, but, once the
> 'figurin' is done, rewards are definitely (IMO) paid with what seems like
> more direct, sprightly system response.
> 
> My XP installation is rock solid, and everything (including PSCS4) works
> fine, but, compared to Linux, it's a real snail.  Ubuntu can have my
> scanner warmed up and scanning in the time it takes the equivalent
> software in XP just to load.
> 
> Sorry, didn't mean to get off topic.
> 
> Thanks again.
> 
> Caruso
> 
> Frank Peters wrote:
>> 
>> On Sat, 10 Oct 2009 06:03:29 -0700 (PDT)
>> carusoswi <[email protected]> wrote:
>> 
>>> 
>>> I don't understand.  When I open my images using Cinepaint, the bar at
>>> the
>>> top states '8-bit unsigned integer', so I assume I'm dealing with an
>>> 8-bit
>>> file.  Just to be clear, I'm scanning 35 mm negatives at 3200 dpi, then
>>> opening them with Cinepaint.  I'm trying to figure out why it appears
>>> I'm
>>> not getting 16-bit images. 
>>>
>> 
>> You must be scanning to an 8-bit file.  Cinepaint will save to whatever
>> was the format of the original image.
>> 
>> You can, however, convert the image data type within cinepaint by going
>> to the "Image" menu.  There you will be able to select several formats
>> including 16-bit.  By choosing 16-bit, your image will be converted
>> internally
>> and then can be saved as a 16-bit file.  But, as someone else already
>> indicated,
>> if the image was scanned using 8-bits it would be of no value to convert
>> it
>> to 16-bits.
>> 
>> Frank Peters
>> 
>> ------------------------------------------------------------------------------
>> Come build with us! The BlackBerry(R) Developer Conference in SF, CA
>> is the only developer event you need to attend this year. Jumpstart your
>> developing skills, take BlackBerry mobile applications to market and stay 
>> ahead of the curve. Join us from November 9 - 12, 2009. Register now!
>> http://p.sf.net/sfu/devconference
>> _______________________________________________
>> Cinepaint-users mailing list
>> Cinepaint-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>> https://lists.sourceforge.net/lists/listinfo/cinepaint-users
>> 
>> 
> 
> 

-- 
View this message in context: http://www.nabble.com/Saving-files-in-Cinepaint-22-1-tp25833203p25835644.html
Sent from the cinepaint-users mailing list archive at Nabble.com.


------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference