Re: [CinePaint] Can't compile cinepaint

"さとうゆうじ" <[email protected]>
Newsgroups gmane.comp.video.cinepaint.user
Message-ID <[email protected]> 
Thank you.
I could compile and installed it now.


2006/8/3, Kai-Uwe Behrmann <[email protected]>:
> ,
>
> Can you check for having gtk+-devel and glib-devel installed on your
> system?
>
> regards
> Kai-Uwe Behrmann
>                                + development for color management
>                                + imaging / panoramas
>                                + email: [email protected]
>                                + http://www.behrmann.name
>
>
> Am 03.08.06, 19:29 +0900 schrieb :
>
> > Hi,
> > I could not compile cinepaint too.
> > I'd like to compile and install for CentOS 4.3 for x86 32bit.
> >
> > I try to compile cinepaint-0.21-0:
> > [root@linux cinepaint-0.21-0]# ./configure
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking for gawk... gawk
> > checking whether make sets $(MAKE)... yes
> > checking whether build environment is sane... yes
> > checking for gcc... gcc
> > checking for C compiler default output file name... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for suffix of executables...
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking for gcc option to accept ANSI C... none needed
> > checking for style of include used by make... GNU
> > checking dependency style of gcc... gcc3
> > checking for gcc... (cached) gcc
> > checking whether we are using the GNU C compiler... (cached) yes
> > checking whether gcc accepts -g... (cached) yes
> > checking for gcc option to accept ANSI C... (cached) none needed
> > checking dependency style of gcc... (cached) gcc3
> > checking for g++... g++
> > checking whether we are using the GNU C++ compiler... yes
> > checking whether g++ accepts -g... yes
> > checking dependency style of g++... gcc3
> > checking how to run the C preprocessor... gcc -E
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking whether make sets $(MAKE)... (cached) yes
> > checking whether ln -s works... yes
> > checking build system type... i686-pc-linux
> > checking host system type... i686-pc-linux
> > checking for a sed that does not truncate output... /bin/sed
> > checking for egrep... grep -E
> > checking for ld used by gcc... /usr/bin/ld
> > checking if the linker (/usr/bin/ld) is GNU ld... yes
> > checking for /usr/bin/ld option to reload object files... -r
> > checking for BSD-compatible nm... /usr/bin/nm -B
> > checking how to recognise dependent libraries... pass_all
> > checking for ANSI C header files... yes
> > checking for sys/types.h... yes
> > checking for sys/stat.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... yes
> > checking for memory.h... yes
> > checking for strings.h... yes
> > checking for inttypes.h... yes
> > checking for stdint.h... yes
> > checking for unistd.h... yes
> > checking dlfcn.h usability... yes
> > checking dlfcn.h presence... yes
> > checking for dlfcn.h... yes
> > checking how to run the C++ preprocessor... g++ -E
> > checking for g77... g77
> > checking whether we are using the GNU Fortran 77 compiler... yes
> > checking whether g77 accepts -g... yes
> > checking the maximum length of command line arguments... 32768
> > checking command to parse /usr/bin/nm -B output from gcc object... ok
> > checking for objdir... .libs
> > checking for ar... ar
> > checking for ranlib... ranlib
> > checking for strip... strip
> > checking if gcc static flag  works... yes
> > checking if gcc supports -fno-rtti -fno-exceptions... no
> > checking for gcc option to produce PIC... -fPIC
> > checking if gcc PIC flag -fPIC works... yes
> > checking if gcc supports -c -o file.o... yes
> > checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
> > checking whether -lc should be explicitly linked in... no
> > checking dynamic linker characteristics... GNU/Linux ld.so
> > checking how to hardcode library paths into programs... immediate
> > checking whether stripping libraries is possible... yes
> > checking if libtool supports shared libraries... yes
> > checking whether to build shared libraries... yes
> > checking whether to build static libraries... yes
> > configure: creating libtool
> > appending configuration tag "CXX" to libtool
> > checking for ld used by g++... /usr/bin/ld
> > checking if the linker (/usr/bin/ld) is GNU ld... yes
> > checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
> > checking for g++ option to produce PIC... -fPIC
> > checking if g++ PIC flag -fPIC works... yes
> > checking if g++ supports -c -o file.o... yes
> > checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
> > checking dynamic linker characteristics... GNU/Linux ld.so
> > checking how to hardcode library paths into programs... immediate
> > checking whether stripping libraries is possible... yes
> > appending configuration tag "F77" to libtool
> > checking if libtool supports shared libraries... yes
> > checking whether to build shared libraries... yes
> > checking whether to build static libraries... yes
> > checking for g77 option to produce PIC... -fPIC
> > checking if g77 PIC flag -fPIC works... yes
> > checking if g77 supports -c -o file.o... yes
> > checking whether the g77 linker (/usr/bin/ld) supports shared libraries... yes
> > checking dynamic linker characteristics... GNU/Linux ld.so
> > checking how to hardcode library paths into programs... immediate
> > checking whether stripping libraries is possible... yes
> > checking whether to enable maintainer-specific portions of Makefiles... no
> > checking whether byte ordering is bigendian... no
> > checking for dirent.h that defines DIR... yes
> > checking for library containing opendir... none required
> > checking for ANSI C header files... (cached) yes
> > checking for sys/wait.h that is POSIX.1 compatible... yes
> > checking whether time.h and sys/time.h may both be included... yes
> > checking sys/time.h usability... yes
> > checking sys/time.h presence... yes
> > checking for sys/time.h... yes
> > checking sys/times.h usability... yes
> > checking sys/times.h presence... yes
> > checking for sys/times.h... yes
> > checking for unistd.h... (cached) yes
> > checking for pid_t... yes
> > checking return type of signal handlers... void
> > checking for vprintf... yes
> > checking for _doprnt... no
> > checking for working alloca.h... yes
> > checking for alloca... yes
> > checking fd_set and sys/select... yes
> > checking for pthread_create in -lpthread... yes
> > checking pthread.h usability... yes
> > checking pthread.h presence... yes
> > checking for pthread.h... yes
> > checking for glib-config... no
> > configure: WARNING:
> > *** Check for glib-config failed.
> > *** You can download Glib from http://www.gtk.org/  .
> > checking for inline definition in glibconfig.h... no
> > checking for inline... inline
> > checking for gtk-config... no
> > checking for GTK - version >= 1.2.8... no
> > *** The gtk-config script installed by GTK could not be found
> > *** If GTK was installed in PREFIX, make sure PREFIX/bin is in
> > *** your path, or set the GTK_CONFIG environment variable to the
> > *** full path to gtk-config.
> > configure: error: Test for GTK failed. See the file 'INSTALL' for help.
> >
> > Where is INSTALL file ?
> >
> > And, There is my installed gtk package.
> > [root@linux cinepaint-0.21-0]# rpm -qa|grep gtk
> > authconfig-gtk-4.6.10-rhel4.1
> > gtkhtml3-3.3.2-6.EL
> > iiimf-gtk-12.1-13.EL.3
> > pygtk2-2.4.0-1
> > usermode-gtk-1.74-1
> > pygtk2-libglade-2.4.0-1
> > gtkhtml2-2.6.2-1
> > uim-gtk2-1.0.1-1.el4.kb
> > gnome-python2-gtkhtml2-2.6.0-3
> > gtkspell-2.0.7-2
> > gtksourceview-1.1.0-4
> > gtk-doc-1.2-2
> > gtk2-2.6.7-4_7.el4.at
> > gtk2-devel-2.6.7-4_7.el4.at
> > gtk+-1.2.10-33
> > pygtk2-devel-2.4.0-1
> > gtk2-engines-2.6.3-2_2.el4.at
> > gtk-engines-0.12-6.el4
> >
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
> _______________________________________________
> Cinepaint-users mailing list
> Cinepaint-users-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/cinepaint-users
>
>
>


-- 
 / Satou Yuji
e-mail [email protected]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.