Re: [PATCH v5 2/9] PCI/P2PDMA: Add CONFIG_PCI_P2PDMA_CORE
Matt Evans <[email protected]> Tue, 4 Aug 2026 16:42:43 +0100
| Newsgroups | gmane.linux.kernel.pci,gmane.linux.kernel,gmane.linux.drivers.video-input-infrastructure,gmane.comp.video.dri.devel,gmane.comp.emulators.kvm.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi Leon, Jason, Logan,
I want to ask for your input on a small issue, please:
On 15/07/2026 18:47, Matt Evans wrote:
> The P2PDMA code currently provides two features under the same
> CONFIG_PCI_P2PDMA option:
>
> 1. Locate providers via pcim_p2pdma_provider()
> 2. Manage actual P2P DMA
>
> Some drivers (such as vfio-pci) depend on (1), without having a hard
> dependency on (2).
>
> A future vfio-pci commit will rely on pcim_p2pdma_provider() always
> being present. If that depended on CONFIG_PCI_P2PDMA, it would make
> vfio-pci only available if CONFIG_ZONE_DEVICE is present (e.g. 64-bit
> systems), even when P2P is not needed.
(As a reminder, this exists so that vfio-pci can always export a DMABUF
for mmap() even if !P2PDMA.)
The (in-kernel) users of pcim_p2pdma_provider() are vfio-pci, its
nvgrace-gpu driver, and (since d6c58f4eb3d0 "RDMA/mlx5: Implement DMABUF
export ops") the mlx5 driver.
The vfio-pci drivers gate an actual export on CONFIG_VFIO_PCI_DMABUF
(.'. CONFIG_PCI_P2PDMA), but a comment (in a Claude review!) just
flagged that mlx5 uses the success of pcim_p2pdma_provider() as a sign
that P2PDMA is also supported:
drivers/infiniband/hw/mlx5/main.c:mlx5_ib_mmap_get_pfns():
*provider = pcim_p2pdma_provider(pdev, bar);
/* If the kernel was not compiled with CONFIG_PCI_P2PDMA the
* functionality is not supported.
*/
if (!*provider)
return -EOPNOTSUPP;
This will return success even without CONFIG_PCI_P2PDMA, then
UVERBS_METHOD_DMABUF_ALLOC won't fail early anymore. Even though the
export's attach ultimately fails, moving the point of failure is ugly.
Just shoving an #ifdef in mlx5 isn't right, so would be grateful for
your advice on the most tasteful resolution:
1. Imagining future drivers might use pcim_p2pdma_provider(), maybe
p2pdma could export a `pcim_p2pdma_supported()` or similar which
returns whether CONFIG_PCI_P2PDMA is present and P2P can ever work.
A user of pcim_p2pdma_provider() is required to also check if P2P is
overall supported.
Ugliness aside, a driver could use #ifdef CONFIG_PCI_P2PDMA to test
whether P2P is expected to work, except that doesn't stop modules
falling into the same trap. I think a function export is better.
2. And/or a test (such the function from #1, or an #ifdef) in the IB
core DMABUF path, to avoid individual drivers from doing the test in
their .mmap_get_pfns(). Other future drivers would be expected to
do similar.
Any better ideas? Sorry I didn't catch this earlier in the review
cycles, I know we've looked at this patch a few times now.
Many thanks,
Matt
>
> To resolve this, introduce CONFIG_PCI_P2PDMA_CORE and refactor the
> basic provider functionality into a new p2pdma_core.c file. This is
> available even if the CONFIG_PCI_P2PDMA feature is disabled (or
> unavailable due to !CONFIG_ZONE_DEVICE), satisfying (1).
>
> Then, when the original CONFIG_PCI_P2PDMA is set, drivers have access
> to the additional P2P features of (2). This still depends on
> CONFIG_ZONE_DEVICE.
>
> Signed-off-by: Matt Evans <[email protected]>
> Acked-by: Bjorn Helgaas <[email protected]>
> Reviewed-by: Logan Gunthorpe <[email protected]>
> ---
> MAINTAINERS | 2 +-
> drivers/pci/Kconfig | 5 ++
> drivers/pci/Makefile | 1 +
> drivers/pci/p2pdma.c | 111 +--------------------------------
> drivers/pci/p2pdma.h | 29 +++++++++
> drivers/pci/p2pdma_core.c | 122 +++++++++++++++++++++++++++++++++++++
> include/linux/pci-p2pdma.h | 24 +++++---
> include/linux/pci.h | 2 +-
> 8 files changed, 175 insertions(+), 121 deletions(-)
> create mode 100644 drivers/pci/p2pdma.h
> create mode 100644 drivers/pci/p2pdma_core.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 806bd2d80d15..192029942145 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20867,7 +20867,7 @@ B: https://bugzilla.kernel.org
> C: irc://irc.oftc.net/linux-pci
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git
> F: Documentation/driver-api/pci/p2pdma.rst
> -F: drivers/pci/p2pdma.c
> +F: drivers/pci/p2pdma*
> F: include/linux/pci-p2pdma.h
>
> PCI POWER CONTROL
> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> index 0c7408509ba2..c991e92bcb85 100644
> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -211,6 +211,7 @@ config PCI_P2PDMA
> # requires 64bit
> #
> depends on 64BIT
> + select PCI_P2PDMA_CORE
> select GENERIC_ALLOCATOR
> select NEED_SG_DMA_FLAGS
> help
> @@ -226,6 +227,10 @@ config PCI_P2PDMA
>
> If unsure, say N.
>
> +config PCI_P2PDMA_CORE
> + default n
> + bool
> +
> config PCI_LABEL
> def_bool y if (DMI || ACPI)
> select NLS
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index 41ebc3b9a518..0b32572d57a1 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_PCI_SYSCALL) += syscall.o
> obj-$(CONFIG_PCI_STUB) += pci-stub.o
> obj-$(CONFIG_PCI_PF_STUB) += pci-pf-stub.o
> obj-$(CONFIG_PCI_ECAM) += ecam.o
> +obj-$(CONFIG_PCI_P2PDMA_CORE) += p2pdma_core.o
> obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
> obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
> obj-$(CONFIG_VGA_ARB) += vgaarb.o
> diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
> index 498bca257419..607580f58c26 100644
> --- a/drivers/pci/p2pdma.c
> +++ b/drivers/pci/p2pdma.c
> @@ -21,12 +21,7 @@
> #include <linux/seq_buf.h>
> #include <linux/xarray.h>
>
> -struct pci_p2pdma {
> - struct gen_pool *pool;
> - bool p2pmem_published;
> - struct xarray map_types;
> - struct p2pdma_provider mem[PCI_STD_NUM_BARS];
> -};
> +#include "p2pdma.h"
>
> struct pci_p2pdma_pagemap {
> struct dev_pagemap pgmap;
> @@ -226,8 +221,7 @@ static const struct dev_pagemap_ops p2pdma_pgmap_ops = {
> .folio_free = p2pdma_folio_free,
> };
>
> -static void pci_p2pdma_release_pool(struct pci_dev *pdev,
> - struct pci_p2pdma *p2pdma)
> +void pci_p2pdma_release_pool(struct pci_dev *pdev, struct pci_p2pdma *p2pdma)
> {
> if (!p2pdma->pool)
> return;
> @@ -237,107 +231,6 @@ static void pci_p2pdma_release_pool(struct pci_dev *pdev,
> sysfs_remove_group(&pdev->dev.kobj, &p2pmem_group);
> }
>
> -static void pci_p2pdma_release(void *data)
> -{
> - struct pci_dev *pdev = data;
> - struct pci_p2pdma *p2pdma;
> -
> - p2pdma = rcu_dereference_protected(pdev->p2pdma, 1);
> - if (!p2pdma)
> - return;
> -
> - /* Flush and disable pci_alloc_p2p_mem() */
> - pdev->p2pdma = NULL;
> - pci_p2pdma_release_pool(pdev, p2pdma);
> - xa_destroy(&p2pdma->map_types);
> -}
> -
> -/**
> - * pcim_p2pdma_init - Initialise peer-to-peer DMA providers
> - * @pdev: The PCI device to enable P2PDMA for
> - *
> - * This function initializes the peer-to-peer DMA infrastructure
> - * for a PCI device. It allocates and sets up the necessary data
> - * structures to support P2PDMA operations, including mapping type
> - * tracking.
> - */
> -int pcim_p2pdma_init(struct pci_dev *pdev)
> -{
> - struct pci_p2pdma *p2p;
> - int i, ret;
> -
> - if (pdev->non_mappable_bars)
> - return -EOPNOTSUPP;
> -
> - p2p = rcu_dereference_protected(pdev->p2pdma, 1);
> - if (p2p)
> - return 0;
> -
> - p2p = devm_kzalloc(&pdev->dev, sizeof(*p2p), GFP_KERNEL);
> - if (!p2p)
> - return -ENOMEM;
> -
> - xa_init(&p2p->map_types);
> - /*
> - * Iterate over all standard PCI BARs and record only those that
> - * correspond to MMIO regions. Skip non-memory resources (e.g. I/O
> - * port BARs) since they cannot be used for peer-to-peer (P2P)
> - * transactions.
> - */
> - for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> - if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM))
> - continue;
> -
> - p2p->mem[i].owner = &pdev->dev;
> - p2p->mem[i].bus_offset =
> - pci_bus_address(pdev, i) - pci_resource_start(pdev, i);
> - }
> -
> - ret = devm_add_action_or_reset(&pdev->dev, pci_p2pdma_release, pdev);
> - if (ret)
> - goto out_p2p;
> -
> - rcu_assign_pointer(pdev->p2pdma, p2p);
> - return 0;
> -
> -out_p2p:
> - devm_kfree(&pdev->dev, p2p);
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(pcim_p2pdma_init);
> -
> -/**
> - * pcim_p2pdma_provider - Get peer-to-peer DMA provider
> - * @pdev: The PCI device to enable P2PDMA for
> - * @bar: BAR index to get provider
> - *
> - * This function gets peer-to-peer DMA provider for a PCI device. The lifetime
> - * of the provider (and of course the MMIO) is bound to the lifetime of the
> - * driver. A driver calling this function must ensure that all references to the
> - * provider, and any DMA mappings created for any MMIO, are all cleaned up
> - * before the driver remove() completes.
> - *
> - * Since P2P is almost always shared with a second driver this means some system
> - * to notify, invalidate and revoke the MMIO's DMA must be in place to use this
> - * function. For example a revoke can be built using DMABUF.
> - */
> -struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev, int bar)
> -{
> - struct pci_p2pdma *p2p;
> -
> - if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM) ||
> - pdev->non_mappable_bars)
> - return NULL;
> -
> - p2p = rcu_dereference_protected(pdev->p2pdma, 1);
> - if (WARN_ON(!p2p))
> - /* Someone forgot to call to pcim_p2pdma_init() before */
> - return NULL;
> -
> - return &p2p->mem[bar];
> -}
> -EXPORT_SYMBOL_GPL(pcim_p2pdma_provider);
> -
> static int pci_p2pdma_setup_pool(struct pci_dev *pdev)
> {
> struct pci_p2pdma *p2pdma;
> diff --git a/drivers/pci/p2pdma.h b/drivers/pci/p2pdma.h
> new file mode 100644
> index 000000000000..946383809981
> --- /dev/null
> +++ b/drivers/pci/p2pdma.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * PCI peer-to-peer DMA support.
> + */
> +
> +#ifndef _PCI_P2PDMA_H
> +#define _PCI_P2PDMA_H
> +
> +#include <linux/genalloc.h>
> +#include <linux/pci-p2pdma.h>
> +#include <linux/xarray.h>
> +
> +struct pci_p2pdma {
> + struct gen_pool *pool;
> + bool p2pmem_published;
> + struct xarray map_types;
> + struct p2pdma_provider mem[PCI_STD_NUM_BARS];
> +};
> +
> +#ifdef CONFIG_PCI_P2PDMA
> +void pci_p2pdma_release_pool(struct pci_dev *pdev, struct pci_p2pdma *p2pdma);
> +#else
> +static inline void pci_p2pdma_release_pool(struct pci_dev *pdev,
> + struct pci_p2pdma *p2pdma)
> +{
> +}
> +#endif
> +
> +#endif
> diff --git a/drivers/pci/p2pdma_core.c b/drivers/pci/p2pdma_core.c
> new file mode 100644
> index 000000000000..9e997f373b1e
> --- /dev/null
> +++ b/drivers/pci/p2pdma_core.c
> @@ -0,0 +1,122 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCI peer-to-peer DMA support core, providing a bare-bones
> + * pcim_p2pdma_provider() interface to drivers even if full P2PDMA
> + * isn't present. The full P2PDMA feature is in p2pdma.c (see
> + * CONFIG_PCI_P2PDMA).
> + *
> + * Copyright (c) 2016-2018, Logan Gunthorpe
> + * Copyright (c) 2016-2017, Microsemi Corporation
> + * Copyright (c) 2017, Christoph Hellwig
> + * Copyright (c) 2018, Eideticom Inc.
> + */
> +
> +#define pr_fmt(fmt) "pci-p2pdma: " fmt
> +#include <linux/ctype.h>
> +#include <linux/genalloc.h>
> +#include <linux/memremap.h>
> +#include <linux/pci-p2pdma.h>
> +#include <linux/xarray.h>
> +
> +#include "p2pdma.h"
> +
> +static void pci_p2pdma_release(void *data)
> +{
> + struct pci_dev *pdev = data;
> + struct pci_p2pdma *p2pdma;
> +
> + p2pdma = rcu_dereference_protected(pdev->p2pdma, 1);
> + if (!p2pdma)
> + return;
> +
> + /* Flush and disable pci_alloc_p2p_mem() */
> + pdev->p2pdma = NULL;
> + pci_p2pdma_release_pool(pdev, p2pdma);
> + xa_destroy(&p2pdma->map_types);
> +}
> +
> +/**
> + * pcim_p2pdma_init - Initialise peer-to-peer DMA providers
> + * @pdev: The PCI device to enable P2PDMA for
> + *
> + * This function initializes the peer-to-peer DMA infrastructure
> + * for a PCI device. It allocates and sets up the necessary data
> + * structures to support P2PDMA operations, including mapping type
> + * tracking.
> + */
> +int pcim_p2pdma_init(struct pci_dev *pdev)
> +{
> + struct pci_p2pdma *p2p;
> + int i, ret;
> +
> + if (pdev->non_mappable_bars)
> + return -EOPNOTSUPP;
> +
> + p2p = rcu_dereference_protected(pdev->p2pdma, 1);
> + if (p2p)
> + return 0;
> +
> + p2p = devm_kzalloc(&pdev->dev, sizeof(*p2p), GFP_KERNEL);
> + if (!p2p)
> + return -ENOMEM;
> +
> + xa_init(&p2p->map_types);
> + /*
> + * Iterate over all standard PCI BARs and record only those that
> + * correspond to MMIO regions. Skip non-memory resources (e.g. I/O
> + * port BARs) since they cannot be used for peer-to-peer (P2P)
> + * transactions.
> + */
> + for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> + if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM))
> + continue;
> +
> + p2p->mem[i].owner = &pdev->dev;
> + p2p->mem[i].bus_offset =
> + pci_bus_address(pdev, i) - pci_resource_start(pdev, i);
> + }
> +
> + ret = devm_add_action_or_reset(&pdev->dev, pci_p2pdma_release, pdev);
> + if (ret)
> + goto out_p2p;
> +
> + rcu_assign_pointer(pdev->p2pdma, p2p);
> + return 0;
> +
> +out_p2p:
> + devm_kfree(&pdev->dev, p2p);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(pcim_p2pdma_init);
> +
> +/**
> + * pcim_p2pdma_provider - Get peer-to-peer DMA provider
> + * @pdev: The PCI device to enable P2PDMA for
> + * @bar: BAR index to get provider
> + *
> + * This function gets peer-to-peer DMA provider for a PCI device. The lifetime
> + * of the provider (and of course the MMIO) is bound to the lifetime of the
> + * driver. A driver calling this function must ensure that all references to the
> + * provider, and any DMA mappings created for any MMIO, are all cleaned up
> + * before the driver remove() completes.
> + *
> + * Since P2P is almost always shared with a second driver this means some system
> + * to notify, invalidate and revoke the MMIO's DMA must be in place to use this
> + * function. For example a revoke can be built using DMABUF.
> + */
> +struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev, int bar)
> +{
> + struct pci_p2pdma *p2p;
> +
> + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM) ||
> + pdev->non_mappable_bars)
> + return NULL;
> +
> + p2p = rcu_dereference_protected(pdev->p2pdma, 1);
> + if (WARN_ON(!p2p))
> + /* Someone forgot to call to pcim_p2pdma_init() before */
> + return NULL;
> +
> + return &p2p->mem[bar];
> +}
> +EXPORT_SYMBOL_GPL(pcim_p2pdma_provider);
> diff --git a/include/linux/pci-p2pdma.h b/include/linux/pci-p2pdma.h
> index 873de20a2247..4c42a7b2ee85 100644
> --- a/include/linux/pci-p2pdma.h
> +++ b/include/linux/pci-p2pdma.h
> @@ -67,9 +67,22 @@ enum pci_p2pdma_map_type {
> PCI_P2PDMA_MAP_THRU_HOST_BRIDGE,
> };
>
> -#ifdef CONFIG_PCI_P2PDMA
> +#ifdef CONFIG_PCI_P2PDMA_CORE
> int pcim_p2pdma_init(struct pci_dev *pdev);
> struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev, int bar);
> +#else
> +static inline int pcim_p2pdma_init(struct pci_dev *pdev)
> +{
> + return -EOPNOTSUPP;
> +}
> +static inline struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev,
> + int bar)
> +{
> + return NULL;
> +}
> +#endif
> +
> +#ifdef CONFIG_PCI_P2PDMA
> int pci_p2pdma_add_resource(struct pci_dev *pdev, int bar, size_t size,
> u64 offset);
> int pci_p2pdma_distance_many(struct pci_dev *provider, struct device **clients,
> @@ -89,15 +102,6 @@ ssize_t pci_p2pdma_enable_show(char *page, struct pci_dev *p2p_dev,
> enum pci_p2pdma_map_type pci_p2pdma_map_type(struct p2pdma_provider *provider,
> struct device *dev);
> #else /* CONFIG_PCI_P2PDMA */
> -static inline int pcim_p2pdma_init(struct pci_dev *pdev)
> -{
> - return -EOPNOTSUPP;
> -}
> -static inline struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev,
> - int bar)
> -{
> - return NULL;
> -}
> static inline int pci_p2pdma_add_resource(struct pci_dev *pdev, int bar,
> size_t size, u64 offset)
> {
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 64b308b6e61c..8adbabbec5bf 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -556,7 +556,7 @@ struct pci_dev {
> u16 pasid_cap; /* PASID Capability offset */
> u16 pasid_features;
> #endif
> -#ifdef CONFIG_PCI_P2PDMA
> +#ifdef CONFIG_PCI_P2PDMA_CORE
> struct pci_p2pdma __rcu *p2pdma;
> #endif
> #ifdef CONFIG_PCI_DOE