Re: libGL error with savage driver
"Alex Deucher" <[email protected]>
| Newsgroups | gmane.comp.video.dri.user |
|---|---|
| Message-ID | <[email protected]> |
On 12/11/06, Manfred Paul <[email protected]> wrote: > On Monday 11 December 2006 04:06, Alex Deucher wrote: > > On 12/10/06, Manfred Paul <[email protected]> wrote: > > > Hi, > > > > > > I am using a T23 with a savage card. I installed debian etch and i got > > > some errors related to dri. I checked out the latest driver from git but > > > i still get the following message: > > > > > > $ glxinfo > > > name of display: :0.0 > > > libGL error: drmMap of framebuffer failed (Invalid argument) > > > libGL error: reverting to (slow) indirect rendering > > > display: :0 screen: 0 > > > direct rendering: No > > > > Can you post your xorg log and kernel log? Also what version of the > > savage drm are you using? > > looks like the dri is enabled ok, but AIGLX is having problems. you might try disabling AIGLX or upgrading libdrm and the savage drm. Also what does LIBGL_DEBUG=verbose glxinfo say? Alex > X Window System Version 7.1.1 > Release Date: 12 May 2006 > X Protocol Version 11, Revision 0, Release 7.1.1 > Build Operating System: UNKNOWN > Current Operating System: Linux tuxpad 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 > UTC 2006 i686 > Build Date: 07 July 2006 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 11 07:06:28 2006 > (==) Using config file: "/etc/X11/xorg.conf" > (**) Option "defaultserverlayout" "Default Layout" > (**) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "LCD Monitor" > (**) | |-->Device "S3 Inc. SuperSavage IX/C SDR 1" > (**) |-->Input Device "Generic Keyboard" > (**) |-->Input Device "Configured Mouse" > (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. > Entry deleted from font path. > (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not > exist. > Entry deleted from font path. > (**) FontPath set to: > unix/:7101, > unix/:7100, > /usr/share/fonts/X11/misc, > /usr/share/fonts/X11/100dpi/:unscaled, > /usr/share/fonts/X11/75dpi/:unscaled, > /usr/share/fonts/X11/Type1, > /usr/share/fonts/X11/100dpi, > /usr/share/fonts/X11/75dpi > (==) RgbPath set to "/etc/X11/rgb" > (==) ModulePath set to "/usr/lib/xorg/modules" > (**) Ignoring ABI Version > (II) Open ACPI successful (/var/run/acpid.socket) > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.3 > X.Org Video Driver: 1.0 > X.Org XInput driver : 0.6 > X.Org Server Extension : 0.3 > X.Org Font Renderer : 0.5 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so > (II) Module bitmap: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.5 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/lib/xorg/modules/libpcidata.so > (II) Module pcidata: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Video Driver, version 1.0 > (++) using VT number 7 > > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,3575 card 1014,021d rev 04 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,3576 card 0000,0000 rev 04 class 06,04,00 hdr 01 > (II) PCI: 00:1d:0: chip 8086,2482 card 1014,0220 rev 02 class 0c,03,00 hdr 80 > (II) PCI: 00:1d:1: chip 8086,2484 card 1014,0220 rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1d:2: chip 8086,2487 card 1014,0220 rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01 > (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:1f:1: chip 8086,248a card 1014,0220 rev 02 class 01,01,8a hdr 00 > (II) PCI: 00:1f:3: chip 8086,2483 card 1014,0220 rev 02 class 0c,05,00 hdr 00 > (II) PCI: 00:1f:5: chip 8086,2485 card 1014,0222 rev 02 class 04,01,00 hdr 00 > (II) PCI: 01:00:0: chip 5333,8c2e card 1014,01fc rev 05 class 03,00,00 hdr 00 > (II) PCI: 02:00:0: chip 104c,ac51 card 2000,0000 rev 00 class 06,07,00 hdr 82 > (II) PCI: 02:00:1: chip 104c,ac51 card 2800,0000 rev 00 class 06,07,00 hdr 82 > (II) PCI: 02:02:0: chip 11c1,0449 card 1468,0410 rev 01 class 07,80,00 hdr 00 > (II) PCI: 02:08:0: chip 8086,1031 card 1014,0209 rev 42 class 02,00,00 hdr 00 > (II) PCI: 03:00:0: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr 80 > (II) PCI: 03:00:1: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr 80 > (II) PCI: 03:00:2: chip 1106,3104 card 1106,3104 rev 63 class 0c,03,20 hdr 80 > (II) PCI: 07:00:0: chip 1260,3890 card 1385,4800 rev 01 class 02,80,00 hdr 00 > (II) PCI: End of PCI scan > (II) Intel Bridge workaround enabled > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xe0000000 - 0xebffffff (0xc000000) MX[B] > (II) Subtractive PCI-to-PCI bridge: > (II) Bus 2: bridge is at (0:30:0), (0,2,8), BCTRL: 0x0004 (VGA_EN is cleared) > (II) Bus 2 I/O range: > [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] > [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] > [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] > [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B] > [4] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] > [5] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] > [6] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] > [7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] > [8] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] > [9] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] > [10] -1 0 0x00004800 - 0x000048ff (0x100) IX[B] > [11] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B] > [12] -1 0 0x00005000 - 0x000050ff (0x100) IX[B] > [13] -1 0 0x00005400 - 0x000054ff (0x100) IX[B] > [14] -1 0 0x00005800 - 0x000058ff (0x100) IX[B] > [15] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B] > [16] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [17] -1 0 0x00006400 - 0x000064ff (0x100) IX[B] > [18] -1 0 0x00006800 - 0x000068ff (0x100) IX[B] > [19] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B] > (II) Bus 2 non-prefetchable memory range: > [0] -1 0 0xc0200000 - 0xcfffffff (0xfe00000) MX[B] > (II) Bus 2 prefetchable memory range: > [0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) > (II) PCI-to-CardBus bridge: > (II) Bus 3: bridge is at (2:0:0), (2,3,6), BCTRL: 0x0500 (VGA_EN is cleared) > (II) Bus 3 I/O range: > [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] > [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] > (II) Bus 3 non-prefetchable memory range: > [0] -1 0 0xc2000000 - 0xc3ffffff (0x2000000) MX[B] > (II) Bus 3 prefetchable memory range: > [0] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B] > (II) PCI-to-CardBus bridge: > (II) Bus 7: bridge is at (2:0:1), (2,7,7), BCTRL: 0x0500 (VGA_EN is cleared) > (II) Bus 7 I/O range: > [0] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] > [1] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B] > (II) Bus 7 non-prefetchable memory range: > [0] -1 0 0xc4000000 - 0xc5ffffff (0x2000000) MX[B] > (II) Bus 7 prefetchable memory range: > [0] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B] > (--) PCI:*(1:0:0) S3 Inc. SuperSavage IX/C SDR rev 5, Mem @ 0xc0100000/19, > 0xe8000000/26, 0xe4000000/26, 0xe0000000/25 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to > 0xcfffffff > (II) Active PCI resource ranges: > [0] -1 0 0xc4000000 - 0xc4001fff (0x2000) MX[B] > [1] -1 0 0xc2000300 - 0xc20003ff (0x100) MX[B] > [2] -1 0 0xc2000200 - 0xc20002ff (0x100) MX[B] > [3] -1 0 0xc2000100 - 0xc20001ff (0x100) MX[B] > [4] -1 0 0xc2000000 - 0xc20000ff (0x100) MX[B] > [5] -1 0 0xc0200000 - 0xc0200fff (0x1000) MX[B] > [6] -1 0 0xc0201000 - 0xc02010ff (0x100) MX[B] > [7] -1 0 0x50001000 - 0x500013ff (0x400) MX[B] > [8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O > [9] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B) > [10] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [11] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [12] -1 0 0xc0100000 - 0xc017ffff (0x80000) MX[B](B) > [13] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] > [14] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] > [15] -1 0 0x00006400 - 0x0000643f (0x40) IX[B] > [16] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [17] -1 0 0x00006440 - 0x00006447 (0x8) IX[B] > [18] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] > [19] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [20] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] > [21] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] > [22] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [23] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] > [24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] > [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] > [26] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] > [27] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] > [28] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xc4000000 - 0xc4001fff (0x2000) MX[B] > [1] -1 0 0xc2000300 - 0xc20003ff (0x100) MX[B] > [2] -1 0 0xc2000200 - 0xc20002ff (0x100) MX[B] > [3] -1 0 0xc2000100 - 0xc20001ff (0x100) MX[B] > [4] -1 0 0xc2000000 - 0xc20000ff (0x100) MX[B] > [5] -1 0 0xc0200000 - 0xc0200fff (0x1000) MX[B] > [6] -1 0 0xc0201000 - 0xc02010ff (0x100) MX[B] > [7] -1 0 0x50001000 - 0x500013ff (0x400) MX[B] > [8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O > [9] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B) > [10] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [11] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [12] -1 0 0xc0100000 - 0xc017ffff (0x80000) MX[B](B) > [13] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] > [14] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] > [15] -1 0 0x00006400 - 0x0000643f (0x40) IX[B] > [16] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [17] -1 0 0x00006440 - 0x00006447 (0x8) IX[B] > [18] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] > [19] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [20] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] > [21] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] > [22] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [23] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] > [24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] > [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] > [26] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] > [27] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] > [28] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0xc4000000 - 0xc4001fff (0x2000) MX[B] > [5] -1 0 0xc2000300 - 0xc20003ff (0x100) MX[B] > [6] -1 0 0xc2000200 - 0xc20002ff (0x100) MX[B] > [7] -1 0 0xc2000100 - 0xc20001ff (0x100) MX[B] > [8] -1 0 0xc2000000 - 0xc20000ff (0x100) MX[B] > [9] -1 0 0xc0200000 - 0xc0200fff (0x1000) MX[B] > [10] -1 0 0xc0201000 - 0xc02010ff (0x100) MX[B] > [11] -1 0 0x50001000 - 0x500013ff (0x400) MX[B] > [12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O > [13] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B) > [14] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [15] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [16] -1 0 0xc0100000 - 0xc017ffff (0x80000) MX[B](B) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] > [20] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] > [21] -1 0 0x00006400 - 0x0000643f (0x40) IX[B] > [22] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [23] -1 0 0x00006440 - 0x00006447 (0x8) IX[B] > [24] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] > [25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [26] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] > [27] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] > [28] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [29] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] > [30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] > [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] > [32] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] > [33] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] > [34] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] > (II) LoadModule: "drm" > (II) Loading /usr/lib/xorg/modules/linux/libdrm.so > (II) Module drm: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 0.3 > (II) LoadModule: "bitmap" > (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so > (II) Loading font Bitmap > (II) LoadModule: "dbe" > (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.3 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "ddc" > (II) Loading /usr/lib/xorg/modules/libddc.so > (II) Module ddc: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Video Driver, version 1.0 > (II) LoadModule: "dri" > (II) Loading /usr/lib/xorg/modules/extensions/libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 0.3 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Reloading /usr/lib/xorg/modules/linux/libdrm.so > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.3 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "freetype" > (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so > (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" > compiled for 7.1.1, module version = 2.1.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.5 > (II) Loading font FreeType > (II) LoadModule: "glx" > (II) Loading /usr/lib/xorg/modules/extensions/libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 0.3 > (==) AIGLX enabled > (II) Loading extension GLX > (II) LoadModule: "int10" > (II) Loading /usr/lib/xorg/modules/libint10.so > (II) Module int10: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Video Driver, version 1.0 > (II) LoadModule: "record" > (II) Loading /usr/lib/xorg/modules/extensions/librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.3 > (II) Loading extension RECORD > (II) LoadModule: "type1" > (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so > (II) Module type1: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.2 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.5 > (II) Loading font Type1 > (II) LoadModule: "vbe" > (II) Loading /usr/lib/xorg/modules/libvbe.so > (II) Module vbe: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.1.0 > ABI class: X.Org Video Driver, version 1.0 > (II) LoadModule: "savage" > (II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so > (II) Module savage: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 2.1.2 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 1.0 > (II) LoadModule: "kbd" > (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.1.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 0.6 > (II) LoadModule: "mouse" > (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.1.1 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 0.6 > (II) SAVAGE: driver (version 2.1.2) for S3 Savage chipsets: Savage4, > Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, > Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, > Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64, > SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128, > SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64, > SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset SuperSavage found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0xc4000000 - 0xc4001fff (0x2000) MX[B] > [5] -1 0 0xc2000300 - 0xc20003ff (0x100) MX[B] > [6] -1 0 0xc2000200 - 0xc20002ff (0x100) MX[B] > [7] -1 0 0xc2000100 - 0xc20001ff (0x100) MX[B] > [8] -1 0 0xc2000000 - 0xc20000ff (0x100) MX[B] > [9] -1 0 0xc0200000 - 0xc0200fff (0x1000) MX[B] > [10] -1 0 0xc0201000 - 0xc02010ff (0x100) MX[B] > [11] -1 0 0x50001000 - 0x500013ff (0x400) MX[B] > [12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O > [13] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B) > [14] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [15] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [16] -1 0 0xc0100000 - 0xc017ffff (0x80000) MX[B](B) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] > [20] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] > [21] -1 0 0x00006400 - 0x0000643f (0x40) IX[B] > [22] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [23] -1 0 0x00006440 - 0x00006447 (0x8) IX[B] > [24] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] > [25] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [26] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] > [27] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] > [28] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [29] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] > [30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] > [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] > [32] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] > [33] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] > [34] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] > (II) resource ranges after probing: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0xc4000000 - 0xc4001fff (0x2000) MX[B] > [5] -1 0 0xc2000300 - 0xc20003ff (0x100) MX[B] > [6] -1 0 0xc2000200 - 0xc20002ff (0x100) MX[B] > [7] -1 0 0xc2000100 - 0xc20001ff (0x100) MX[B] > [8] -1 0 0xc2000000 - 0xc20000ff (0x100) MX[B] > [9] -1 0 0xc0200000 - 0xc0200fff (0x1000) MX[B] > [10] -1 0 0xc0201000 - 0xc02010ff (0x100) MX[B] > [11] -1 0 0x50001000 - 0x500013ff (0x400) MX[B] > [12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O > [13] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B) > [14] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [15] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [16] -1 0 0xc0100000 - 0xc017ffff (0x80000) MX[B](B) > [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [22] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] > [23] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] > [24] -1 0 0x00006400 - 0x0000643f (0x40) IX[B] > [25] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [26] -1 0 0x00006440 - 0x00006447 (0x8) IX[B] > [27] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] > [28] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [29] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] > [30] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] > [31] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [32] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] > [33] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] > [34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] > [35] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] > [36] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] > [37] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] > [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/lib/xorg/modules/libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 0.1.0 > ABI class: X.Org Video Driver, version 1.0 > (**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16 > (==) SAVAGE(0): RGB weight 565 > (==) SAVAGE(0): Default visual is TrueColor > (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is > 0x0000 > (**) SAVAGE(0): Option "HWCursor" "false" > (**) SAVAGE(0): Option "SWCursor" "true" > (**) SAVAGE(0): Option "AGPMode" "4" > (==) SAVAGE(0): Using XAA acceleration architecture > (**) SAVAGE(0): Using SW cursor > (==) SAVAGE(0): Using video BIOS to set modes > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/lib/xorg/modules/libvbe.so > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/lib/xorg/modules/libint10.so > (II) SAVAGE(0): initializing int10 > (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 > (II) SAVAGE(0): VESA BIOS detected > (II) SAVAGE(0): VESA VBE Version 2.0 > (II) SAVAGE(0): VESA VBE Total Mem: 15168 kB > (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Paramont BIOS > (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 > (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. > (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 > (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0 > (--) SAVAGE(0): Chip: id 8c2e, "SuperSavage/IXC 64" > (--) SAVAGE(0): Engine: "SuperSavage" > (--) SAVAGE(0): AGP card detected > (==) SAVAGE(0): Using AGP DMA > (II) SAVAGE(0): DMA is not supported on SuperSavages. > (==) SAVAGE(0): DMA disabled > (**) SAVAGE(0): Using AGP 4x mode > (==) SAVAGE(0): Using 16 MB AGP aperture > (==) SAVAGE(0): Write-combining range (0xe8000000,0x4000000) > (==) SAVAGE(0): Write-combining range (0xe4000000,0x4000000) > (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) > (--) SAVAGE(0): probed videoram: 16384k > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/lib/xorg/modules/libddc.so > (--) SAVAGE(0): No DDC signal > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/lib/xorg/modules/libi2c.so > (II) Module i2c: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.2.0 > ABI class: X.Org Video Driver, version 1.0 > (II) SAVAGE(0): I2C bus "I2C bus" initialized. > (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0. > (II) SAVAGE(0): I2C device "I2C bus:ddc2" removed. > (II) SAVAGE(0): Manufacturer: MAX Model: 601 Serial#: 1232 > (II) SAVAGE(0): Year: 2003 Week: 8 > (II) SAVAGE(0): EDID Version: 1.3 > (II) SAVAGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V > (II) SAVAGE(0): Sync: Separate > (II) SAVAGE(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 > (II) SAVAGE(0): Gamma: 2.20 > (II) SAVAGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) SAVAGE(0): First detailed timing is preferred mode > (II) SAVAGE(0): redX: 0.597 redY: 0.350 greenX: 0.310 greenY: 0.530 > (II) SAVAGE(0): blueX: 0.153 blueY: 0.131 whiteX: 0.310 whiteY: 0.330 > (II) SAVAGE(0): Supported VESA Video Modes: > (II) SAVAGE(0): 720x400@70Hz > (II) SAVAGE(0): 640x480@60Hz > (II) SAVAGE(0): 640x480@67Hz > (II) SAVAGE(0): 640x480@72Hz > (II) SAVAGE(0): 640x480@75Hz > (II) SAVAGE(0): 800x600@60Hz > (II) SAVAGE(0): 800x600@72Hz > (II) SAVAGE(0): 800x600@75Hz > (II) SAVAGE(0): 832x624@75Hz > (II) SAVAGE(0): 1024x768@60Hz > (II) SAVAGE(0): 1024x768@70Hz > (II) SAVAGE(0): 1024x768@75Hz > (II) SAVAGE(0): Manufacturer's mask: 0 > (II) SAVAGE(0): Supported additional Video Mode: > (II) SAVAGE(0): clock: 65.0 MHz Image Size: 304 x 228 mm > (II) SAVAGE(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 > h_border: 0 > (II) SAVAGE(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 > v_border: 0 > (II) SAVAGE(0): Serial No: 030801232 > (II) SAVAGE(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 60 kHz, > PixClock max 80 MHz > (II) SAVAGE(0): Monitor name: Belinea101537 > (--) SAVAGE(0): Detected current MCLK value of 286.364 MHz > (--) SAVAGE(0): 1408x1050 TFT LCD panel detected but not active > (--) SAVAGE(0): Found 13 modes at this depth: > [10e] 320 x 200, 70Hz > [111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz > [114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz > [117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz > [11a] 1280 x 1024, 60Hz, 75Hz, 85Hz > [11d] 640 x 400, 70Hz > [122] 1600 x 1200, 60Hz, 75Hz, 85Hz > [133] 320 x 240, 72Hz > [13c] 1400 x 1050, 60Hz, 75Hz > [143] 400 x 300, 72Hz > [153] 512 x 384, 70Hz > [173] 720 x 480, 75Hz > [17e] 720 x 576, 75Hz > (II) SAVAGE(0): LCD Monitor: Using hsync range of 30.00-60.00 kHz > (II) SAVAGE(0): LCD Monitor: Using vrefresh range of 60.00-75.00 Hz > (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz > (--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz. > (II) SAVAGE(0): Not using default mode "640x350" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz. > (II) SAVAGE(0): Not using default mode "320x175" (no mode of this name) > (--) SAVAGE(0): Chose mode 11d at 70Hz. > (II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 10e at 70Hz. > (II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz. > (II) SAVAGE(0): Not using default mode "720x400" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz. > (II) SAVAGE(0): Not using default mode "360x200" (no mode of this name) > (--) SAVAGE(0): Chose mode 111 at 60Hz. > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (--) SAVAGE(0): Chose mode 111 at 72Hz. > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (--) SAVAGE(0): Chose mode 111 at 75Hz. > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (--) SAVAGE(0): Chose mode 111 at 85Hz. > (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 114 at 60Hz. > (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 114 at 60Hz. > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (--) SAVAGE(0): Chose mode 114 at 72Hz. > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (--) SAVAGE(0): Chose mode 114 at 75Hz. > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (--) SAVAGE(0): Chose mode 114 at 85Hz. > (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 117 at 85Hz. > (II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range) > (--) SAVAGE(0): Chose mode 117 at 60Hz. > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (--) SAVAGE(0): Chose mode 117 at 70Hz. > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (--) SAVAGE(0): Chose mode 117 at 75Hz. > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (--) SAVAGE(0): Chose mode 117 at 85Hz. > (WW) (1024x768,LCD Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 1152x864 75Hz. > (II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz. > (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1280x960 60Hz. > (II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name) > (--) SAVAGE(0): Chose mode 111 at 60Hz. > (--) SAVAGE(0): No suitable BIOS mode found for 1280x960 85Hz. > (II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name) > (--) SAVAGE(0): Chose mode 111 at 85Hz. > (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) > (--) SAVAGE(0): Chose mode 11a at 60Hz. > (WW) (1280x1024,LCD Monitor) mode clock 108MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz. > (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) > (--) SAVAGE(0): Chose mode 11a at 75Hz. > (WW) (1280x1024,LCD Monitor) mode clock 135MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz. > (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) > (--) SAVAGE(0): Chose mode 11a at 85Hz. > (WW) (1280x1024,LCD Monitor) mode clock 157.5MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz. > (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) > (--) SAVAGE(0): Chose mode 122 at 60Hz. > (WW) (1600x1200,LCD Monitor) mode clock 162MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) > (--) SAVAGE(0): Chose mode 114 at 60Hz. > (WW) (800x600,LCD Monitor) mode clock 81MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) > (--) SAVAGE(0): Chose mode 122 at 60Hz. > (WW) (1600x1200,LCD Monitor) mode clock 175.5MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) > (--) SAVAGE(0): Chose mode 114 at 60Hz. > (WW) (800x600,LCD Monitor) mode clock 87.75MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) > (--) SAVAGE(0): Chose mode 122 at 75Hz. > (WW) (1600x1200,LCD Monitor) mode clock 189MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) > (--) SAVAGE(0): Chose mode 114 at 72Hz. > (WW) (800x600,LCD Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) > (--) SAVAGE(0): Chose mode 122 at 75Hz. > (WW) (1600x1200,LCD Monitor) mode clock 202.5MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) > (--) SAVAGE(0): Chose mode 114 at 75Hz. > (WW) (800x600,LCD Monitor) mode clock 101.25MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) > (--) SAVAGE(0): Chose mode 122 at 85Hz. > (WW) (1600x1200,LCD Monitor) mode clock 229.5MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) > (--) SAVAGE(0): Chose mode 114 at 85Hz. > (WW) (800x600,LCD Monitor) mode clock 114.75MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 1792x1344 60Hz. > (II) SAVAGE(0): Not using default mode "1792x1344" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz. > (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name) > (II) SAVAGE(0): Not using default mode "1792x1344" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz. > (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1856x1392 60Hz. > (II) SAVAGE(0): Not using default mode "1856x1392" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz. > (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name) > (II) SAVAGE(0): Not using default mode "1856x1392" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz. > (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1920x1440 60Hz. > (II) SAVAGE(0): Not using default mode "1920x1440" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz. > (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) > (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz. > (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz. > (II) SAVAGE(0): Not using default mode "832x624" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz. > (II) SAVAGE(0): Not using default mode "416x312" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1280x768 60Hz. > (II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 640x384 60Hz. > (II) SAVAGE(0): Not using default mode "640x384" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1280x800 59Hz. > (II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name) > (--) SAVAGE(0): Chose mode 11d at 70Hz. > (--) SAVAGE(0): No suitable BIOS mode found for 1152x768 54Hz. > (II) SAVAGE(0): Not using default mode "1152x768" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 576x384 54Hz. > (II) SAVAGE(0): Not using default mode "576x384" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1152x864 85Hz. > (II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz. > (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) > (--) SAVAGE(0): Chose mode 13c at 60Hz. > (WW) (1400x1050,LCD Monitor) mode clock 122MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz. > (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) > (--) SAVAGE(0): Chose mode 13c at 75Hz. > (WW) (1400x1050,LCD Monitor) mode clock 151MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz. > (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) > (--) SAVAGE(0): Chose mode 13c at 75Hz. > (WW) (1400x1050,LCD Monitor) mode clock 155.8MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz. > (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) > (--) SAVAGE(0): Chose mode 13c at 75Hz. > (WW) (1400x1050,LCD Monitor) mode clock 184MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range) > (--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz. > (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1440x900 60Hz. > (II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 720x450 60Hz. > (II) SAVAGE(0): Not using default mode "720x450" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1600x1024 59Hz. > (II) SAVAGE(0): Not using default mode "1600x1024" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz. > (II) SAVAGE(0): Not using default mode "800x512" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 60Hz. > (II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 840x525 60Hz. > (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 60Hz. > (II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 960x600 60Hz. > (II) SAVAGE(0): Not using default mode "960x600" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 72Hz. > (II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name) > (--) SAVAGE(0): No suitable BIOS mode found for 960x600 72Hz. > (II) SAVAGE(0): Not using default mode "960x600" (no mode of this name) > (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz. > (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) > (II) SAVAGE(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): Chose mode 117 at 60Hz. > (WW) (1024x768,LCD Monitor) mode clock 133.475MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) > (II) SAVAGE(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): Chose mode 117 at 75Hz. > (WW) (1024x768,LCD Monitor) mode clock 170.24MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) > (II) SAVAGE(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (--) SAVAGE(0): Chose mode 117 at 85Hz. > (WW) (1024x768,LCD Monitor) mode clock 194.02MHz exceeds DDC maximum 80MHz > (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) > (--) SAVAGE(0): Chose mode 117 at 75Hz. > (--) SAVAGE(0): Chose mode 117 at 70Hz. > (--) SAVAGE(0): Chose mode 117 at 60Hz. > (--) SAVAGE(0): Chose mode 114 at 75Hz. > (--) SAVAGE(0): Chose mode 114 at 72Hz. > (--) SAVAGE(0): Chose mode 114 at 60Hz. > (--) SAVAGE(0): Chose mode 111 at 75Hz. > (--) SAVAGE(0): Chose mode 111 at 72Hz. > (--) SAVAGE(0): Chose mode 111 at 60Hz. > (--) SAVAGE(0): Chose mode 111 at 60Hz. > (--) SAVAGE(0): Chose mode 11d at 70Hz. > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (--) SAVAGE(0): Chose mode 153 at 70Hz. > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (--) SAVAGE(0): Chose mode 143 at 72Hz. > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (--) SAVAGE(0): Chose mode 133 at 72Hz. > (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024) > (**) SAVAGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) SAVAGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 > 800 +hsync +vsync > (**) SAVAGE(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) SAVAGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 > 806 -hsync -vsync > (**) SAVAGE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) SAVAGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 > 806 -hsync -vsync > (**) SAVAGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) SAVAGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 > +hsync +vsync > (**) SAVAGE(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) SAVAGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 > +hsync +vsync > (**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) SAVAGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 > +hsync +vsync > (**) SAVAGE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) SAVAGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 > 500 -hsync -vsync > (**) SAVAGE(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) SAVAGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 > 520 -hsync -vsync > (**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) SAVAGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 > 525 -hsync -vsync > (**) SAVAGE(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) > (II) SAVAGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 > doublescan +hsync +vsync > (**) SAVAGE(0): *Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D) > (II) SAVAGE(0): Modeline "640x400" 41.73 640 672 740 840 400 400 402 414 > doublescan > (**) SAVAGE(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) > (II) SAVAGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 > doublescan +hsync +vsync > (**) SAVAGE(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) > (II) SAVAGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 > doublescan -hsync -vsync > (**) SAVAGE(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) > (II) SAVAGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 > doublescan -hsync -vsync > (**) SAVAGE(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) > (II) SAVAGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 > doublescan +hsync +vsync > (**) SAVAGE(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) > (II) SAVAGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 > doublescan +hsync +vsync > (**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) > (II) SAVAGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 > doublescan +hsync +vsync > (**) SAVAGE(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) > (II) SAVAGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 > doublescan -hsync -vsync > (**) SAVAGE(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) > (II) SAVAGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 > doublescan -hsync -vsync > (**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) > (II) SAVAGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 > doublescan -hsync -vsync > (++) SAVAGE(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/lib/xorg/modules/libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.3 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/lib/xorg/modules/libxaa.so > (II) Module xaa: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.2.0 > ABI class: X.Org Video Driver, version 1.0 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xe0000000 - 0xe1ffffff (0x2000000) MS[B] > [1] 0 0 0xe4000000 - 0xe7ffffff (0x4000000) MS[B] > [2] 0 0 0xe8000000 - 0xebffffff (0x4000000) MS[B] > [3] 0 0 0xc0100000 - 0xc017ffff (0x80000) MS[B] > [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] -1 0 0xc4000000 - 0xc4001fff (0x2000) MX[B] > [9] -1 0 0xc2000300 - 0xc20003ff (0x100) MX[B] > [10] -1 0 0xc2000200 - 0xc20002ff (0x100) MX[B] > [11] -1 0 0xc2000100 - 0xc20001ff (0x100) MX[B] > [12] -1 0 0xc2000000 - 0xc20000ff (0x100) MX[B] > [13] -1 0 0xc0200000 - 0xc0200fff (0x1000) MX[B] > [14] -1 0 0xc0201000 - 0xc02010ff (0x100) MX[B] > [15] -1 0 0x50001000 - 0x500013ff (0x400) MX[B] > [16] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O > [17] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B) > [18] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) > [19] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B) > [20] -1 0 0xc0100000 - 0xc017ffff (0x80000) MX[B](B) > [21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [26] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] > [27] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] > [28] -1 0 0x00006400 - 0x0000643f (0x40) IX[B] > [29] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] > [30] -1 0 0x00006440 - 0x00006447 (0x8) IX[B] > [31] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B] > [32] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [33] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] > [34] -1 0 0x00001860 - 0x0000186f (0x10) IX[B] > [35] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [36] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] > [37] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] > [38] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] > [39] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] > [40] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] > [41] -1 0 0x00001800 - 0x0000181f (0x20) IX[B] > [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/lib/xorg/modules/libint10.so > (II) SAVAGE(0): initializing int10 > (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 > (II) SAVAGE(0): VESA BIOS detected > (II) SAVAGE(0): VESA VBE Version 2.0 > (II) SAVAGE(0): VESA VBE Total Mem: 15168 kB > (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Paramont BIOS > (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 > (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. > (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 > (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0 > (II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 16384 kB of Videoram > available > (II) SAVAGE(0): Sufficient Videoram available for 3D > (II) SAVAGE(0): [drm] bpp: 16 depth: 16 > (II) SAVAGE(0): [drm] Sarea 2200+284: 2484 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: Open failed > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: open result is -1, (No such device or address) > drmOpenDevice: Open failed > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 8, (OK) > drmOpenByBusid: drmOpenMinor returns 8 > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > (II) SAVAGE(0): [drm] loaded kernel module for "savage" driver > (II) SAVAGE(0): [drm] DRM interface version 1.2 > (II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0" > (II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xf917f000 > (II) SAVAGE(0): [drm] mapped SAREA 0xf917f000 to 0xaf9b0000 > (II) SAVAGE(0): [drm] framebuffer handle = 0xe8000000 > (II) SAVAGE(0): [drm] added 1 reserved context for kernel > (II) SAVAGE(0): [agp] Mode 0x1f000217 [AGP 0x8086/0x3575; Card 0x5333/0x8c2e] > (II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001 > (II) SAVAGE(0): [agp] agpTextures handle = 0xd0000000 > (II) SAVAGE(0): [drm] aperture handle = 0xe8000000 > (II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI. > (II) SAVAGE(0): [drm] Status handle = 0x2f225000 > (II) SAVAGE(0): [drm] Status page mapped at 0xaf9af000 > (II) SAVAGE(0): [dri] visual configs initialized > (**) SAVAGE(0): DRI is enabled > (--) SAVAGE(0): Chose mode 117 at 75Hz. > (II) SAVAGE(0): virtualX:1024,virtualY:768 > (II) SAVAGE(0): bpp:16,tiledwidthBytes:2048,tiledBufferSize:1572864 > (II) SAVAGE(0): bpp:16,widthBytes:2048,BufferSize:1572864 > (II) SAVAGE(0): videoRambytes:0x01000000 > (II) SAVAGE(0): textureSize:0x0095f000 > (II) SAVAGE(0): textureSize:0x0095f000 > (II) SAVAGE(0): textureOffset:0x00680000 > (II) SAVAGE(0): depthOffset:0x00500000,depthPitch:2048 > (II) SAVAGE(0): backOffset:0x00380000,backPitch:2048 > (II) SAVAGE(0): Reserved back buffer at offset 0x380000 > (II) SAVAGE(0): Reserved depth buffer at offset 0x500000 > (II) SAVAGE(0): Reserved 9596 kb for textures at offset 0x680000 > (II) SAVAGE(0): Using 1023 lines for offscreen memory. > (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 28 128x128 slots > 7 256x256 slots > (==) SAVAGE(0): Backing store disabled > (**) Option "dpms" > (**) SAVAGE(0): DPMS enabled > (II) SAVAGE(0): X context handle = 0x1 > (II) SAVAGE(0): [DRI] installation complete > (II) SAVAGE(0): [junkers]pSAVAGEDRIServer: > (II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000 > (II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000 > (II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000 > (II) SAVAGE(0): [junkers] chipset:0x00000000 > (II) SAVAGE(0): [junkers] sgram:0x00000000 > (II) SAVAGE(0): [junkers] frontbufferSize:0x00180000 > (II) SAVAGE(0): [junkers] frontOffset:0x00000000 > (II) SAVAGE(0): [junkers] frontPitch:0x00000800 > (II) SAVAGE(0): [junkers] backbufferSize:0x00180000 > (II) SAVAGE(0): [junkers] backOffset:0x00380000 > (II) SAVAGE(0): [junkers] backPitch:0x00000800 > (II) SAVAGE(0): [junkers] depthbufferSize:0x00180000 > (II) SAVAGE(0): [junkers] depthOffset:0x00500000 > (II) SAVAGE(0): [junkers] depthPitch:0x00000800 > (II) SAVAGE(0): [junkers] textureOffset:0x00680000 > (II) SAVAGE(0): [junkers] textureSize:0x0095f000 > (II) SAVAGE(0): [junkers] textureSize:0x0095f000 > (II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000 > (II) SAVAGE(0): [junkers] agp:handle:0x00000001 > (II) SAVAGE(0): [junkers] agp:offset:0x01000000 > (II) SAVAGE(0): [junkers] agp:size:0x01000000 > (II) SAVAGE(0): [junkers] agp:map:0x00000000 > (II) SAVAGE(0): [junkers] registers:handle:0xc0100000 > (II) SAVAGE(0): [junkers] registers:offset:0x00000000 > (II) SAVAGE(0): [junkers] registers:size:0x00080000 > (II) SAVAGE(0): [junkers] registers:map:0x00000000 > (II) SAVAGE(0): [junkers] status:handle:0x2f225000 > (II) SAVAGE(0): [junkers] status:offset:0x00000000 > (II) SAVAGE(0): [junkers] status:size:0x00001000 > (II) SAVAGE(0): [junkers] status:map:0xaf9af000 > (II) SAVAGE(0): [junkers] agpTextures:handle:0xd0000000 > (II) SAVAGE(0): [junkers] agpTextures:offset:0x00000000 > (II) SAVAGE(0): [junkers] agpTextures:size:0x01000000 > (II) SAVAGE(0): [junkers] apgTextures:map:0x00000000 > (II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000 > (II) SAVAGE(0): [junkers] cmdDma:handle:0x00000000 > (II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000 > (II) SAVAGE(0): [junkers] cmdDma:size:0x00000000 > (II) SAVAGE(0): [junkers] cmdDma:map:0x00000000 > (II) SAVAGE(0): [junkers]pSAVAGEDRI: > (II) SAVAGE(0): [junkers] chipset:0x00000007 > (II) SAVAGE(0): [junkers] width:0x00000400 > (II) SAVAGE(0): [junkers] height:0x00000300 > (II) SAVAGE(0): [junkers] mem:0x01000000 > (II) SAVAGE(0): [junkers] cpp:2 > (II) SAVAGE(0): [junkers] zpp:2 > (II) SAVAGE(0): [junkers] agpMode:4 > (II) SAVAGE(0): [junkers] bufferSize:65536 > (II) SAVAGE(0): [junkers] frontbufferSize:0x00180000 > (II) SAVAGE(0): [junkers] frontOffset:0x00000000 > (II) SAVAGE(0): [junkers] backbufferSize:0x00180000 > (II) SAVAGE(0): [junkers] backOffset:0x00380000 > (II) SAVAGE(0): [junkers] depthbufferSize:0x00180000 > (II) SAVAGE(0): [junkers] depthOffset:0x00500000 > (II) SAVAGE(0): [junkers] textureOffset:0x00680000 > (II) SAVAGE(0): [junkers] textureSize:0x00900000 > (II) SAVAGE(0): [junkers] logTextureGranularity:0x00000014 > (II) SAVAGE(0): [junkers] agpTextureHandle:0xd0000000 > (II) SAVAGE(0): [junkers] agpTextureSize:0x01000000 > (II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000014 > (II) SAVAGE(0): [junkers] apertureHandle:0xe8000000 > (II) SAVAGE(0): [junkers] apertureSize:0x05000000 > (II) SAVAGE(0): [junkers] aperturePitch:0x00001000 > (II) SAVAGE(0): [junkers] statusHandle:0x2f225000 > (II) SAVAGE(0): [junkers] statusSize:0x00001000 > (II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898 > (II) SAVAGE(0): Direct rendering enabled > (==) RandR enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) Initializing built-in extension XEVIE > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenByBusid: drmOpenMinor returns 9 > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > (EE) AIGLX error: drmMap of framebuffer failed (Invalid argument)(EE) AIGLX: > reverting to software rendering > (II) Loading local sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so > (II) Module GLcore: vendor="X.Org Foundation" > compiled for 7.1.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 0.3 > (II) GLX: Initialized MESA-PROXY GL provider for screen 0 > (**) Option "CoreKeyboard" > (**) Generic Keyboard: Core Keyboard > (**) Option "Protocol" "standard" > (**) Generic Keyboard: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) Generic Keyboard: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) Generic Keyboard: XkbModel: "pc105" > (**) Option "XkbLayout" "de" > (**) Generic Keyboard: XkbLayout: "de" > (**) Option "CustomKeycodes" "off" > (**) Generic Keyboard: CustomKeycodes disabled > (**) Option "Protocol" "ImPS/2" > (**) Configured Mouse: Device: "/dev/input/mice" > (**) Configured Mouse: Protocol: "ImPS/2" > (**) Option "CorePointer" > (**) Configured Mouse: Core Pointer > (**) Option "Device" "/dev/input/mice" > (==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 > (**) Option "EmulateWheel" "on" > (**) Option "EmulateWheelButton" "2" > (==) Configured Mouse: YAxisMapping: buttons 4 and 5 > (**) Configured Mouse: EmulateWheel, EmulateWheelButton: 2, > EmulateWheelInertia: 10, EmulateWheelTimeout: 200 > (**) Configured Mouse: Buttons: 9 > (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) > (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) > xkb_keycodes { include "xfree86+aliases(qwertz)" }; > xkb_types { include "complete" }; > xkb_compatibility { include "complete" }; > xkb_symbols { include "pc(pc105)+de" }; > xkb_geometry { include "pc(pc105)" }; > (II) Configured Mouse: ps2EnableDataReporting: succeeded > Could not init font path element unix/:7101, removing from list! > Could not init font path element unix/:7100, removing from list! > > DRM: > > apt-cache show libdrm2 > Package: libdrm2 > Priority: optional > Section: libs > Installed-Size: 72 > Maintainer: Marcelo E. Magallon <[email protected]> > Architecture: i386 > Source: libdrm > Version: 2.0.2-0.1 > Depends: libc6 (>= 2.3.6-6) > Filename: pool/main/libd/libdrm/libdrm2_2.0.2-0.1_i386.deb > Size: 15180 > MD5sum: 3f66614a4b85a99d94724cf8c49059e8 > SHA1: 72c9c3db2567dfd6387affea6fe90df351095c23 > SHA256: 0840a39baaccc8db04916c94d384ed10a6ad720391027d9acb091f6e1bd051d2 > Description: Userspace interface to kernel DRM services -- runtime > This library implements the userspace interface to the kernel DRM > services. DRM stands for "Direct Rendering Manager", which is the > kernelspace portion of the "Direct Rendering Infrastructure" (DRI). > The DRI is currently used on Linux to provide hardware-accelerated > OpenGL drivers. > . > This package provides the runtime environment for libdrm. > Tag: role::shared-lib > > Kernel 2.6.17 and 2.6.18 > > cat /var/log/kern.log > > Dec 11 07:06:19 tuxpad kernel: klogd 1.4.1#18, log source = /proc/kmsg > started. > Dec 11 07:06:19 tuxpad kernel: Linux version 2.6.18-3-686 (Debian 2.6.18-7) > ([email protected]) (gcc version 4.1.2 20061115 (prerelease) (Debian > 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006 > Dec 11 07:06:19 tuxpad kernel: BIOS-provided physical RAM map: > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 0000000000000000 - 000000000009f000 > (usable) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 000000000009f000 - 00000000000a0000 > (reserved) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 > (reserved) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 0000000000100000 - 000000003ff70000 > (usable) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 000000003ff70000 - 000000003ff7e000 > (ACPI data) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 000000003ff7e000 - 000000003ff80000 > (ACPI NVS) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 000000003ff80000 - 0000000040000000 > (reserved) > Dec 11 07:06:19 tuxpad kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 > (reserved) > Dec 11 07:06:19 tuxpad kernel: 127MB HIGHMEM available. > Dec 11 07:06:19 tuxpad kernel: 896MB LOWMEM available. > Dec 11 07:06:19 tuxpad kernel: On node 0 totalpages: 262000 > Dec 11 07:06:19 tuxpad kernel: DMA zone: 4096 pages, LIFO batch:0 > Dec 11 07:06:19 tuxpad kernel: Normal zone: 225280 pages, LIFO batch:31 > Dec 11 07:06:19 tuxpad kernel: HighMem zone: 32624 pages, LIFO batch:7 > Dec 11 07:06:19 tuxpad kernel: DMI present. > Dec 11 07:06:19 tuxpad kernel: ACPI: RSDP (v002 > IBM ) @ 0x000f7450 > Dec 11 07:06:19 tuxpad kernel: ACPI: XSDT (v001 IBM TP-1A 0x00001180 > LTP 0x00000000) @ 0x3ff73af2 > Dec 11 07:06:19 tuxpad kernel: ACPI: FADT (v001 IBM TP-1A 0x00001180 IBM > 0x00000001) @ 0x3ff73c00 > Dec 11 07:06:19 tuxpad kernel: ACPI: SSDT (v001 IBM TP-1A 0x00001180 > MSFT 0x0100000d) @ 0x3ff73cb4 > Dec 11 07:06:19 tuxpad kernel: ACPI: ECDT (v001 IBM TP-1A 0x00001180 IBM > 0x00000001) @ 0x3ff7ded1 > Dec 11 07:06:19 tuxpad kernel: ACPI: BOOT (v001 IBM TP-1A 0x00001180 > LTP 0x00000001) @ 0x3ff7dfd8 > Dec 11 07:06:19 tuxpad kernel: ACPI: DSDT (v001 IBM TP-1A 0x00001180 > MSFT 0x0100000d) @ 0x00000000 > Dec 11 07:06:19 tuxpad kernel: ACPI: PM-Timer IO Port: 0x1008 > Dec 11 07:06:19 tuxpad kernel: Allocating PCI resources starting at 50000000 > (gap: 40000000:bf800000) > Dec 11 07:06:19 tuxpad kernel: Detected 1199.011 MHz processor. > Dec 11 07:06:19 tuxpad kernel: Built 1 zonelists. Total pages: 262000 > Dec 11 07:06:19 tuxpad kernel: Kernel command line: root=/dev/hda1 ro > vga=0x318 resume=/dev/hda5 > Dec 11 07:06:19 tuxpad kernel: Local APIC disabled by BIOS -- you can enable > it with "lapic" > Dec 11 07:06:19 tuxpad kernel: mapped APIC to ffffd000 (0180c000) > Dec 11 07:06:19 tuxpad kernel: Enabling fast FPU save and restore... done. > Dec 11 07:06:19 tuxpad kernel: Enabling unmasked SIMD FPU exception support... > done. > Dec 11 07:06:19 tuxpad kernel: Initializing CPU#0 > Dec 11 07:06:19 tuxpad kernel: PID hash table entries: 4096 (order: 12, 16384 > bytes) > Dec 11 07:06:19 tuxpad kernel: Console: colour dummy device 80x25 > Dec 11 07:06:19 tuxpad kernel: Dentry cache hash table entries: 131072 (order: > 7, 524288 bytes) > Dec 11 07:06:19 tuxpad kernel: Inode-cache hash table entries: 65536 (order: > 6, 262144 bytes) > Dec 11 07:06:19 tuxpad kernel: Memory: 1030876k/1048000k available (1543k > kernel code, 16428k reserved, 574k data, 196k init, 130496k highmem) > Dec 11 07:06:19 tuxpad kernel: Checking if this processor honours the WP bit > even in supervisor mode... Ok. > Dec 11 07:06:19 tuxpad kernel: Calibrating delay using timer specific > routine.. 2399.70 BogoMIPS (lpj=4799402) > Dec 11 07:06:19 tuxpad kernel: Security Framework v1.0.0 initialized > Dec 11 07:06:19 tuxpad kernel: SELinux: Disabled at boot. > Dec 11 07:06:19 tuxpad kernel: Capability LSM initialized > Dec 11 07:06:19 tuxpad kernel: Mount-cache hash table entries: 512 > Dec 11 07:06:19 tuxpad kernel: CPU: After generic identify, caps: 0383f9ff > 00000000 00000000 00000000 00000000 00000000 00000000 > Dec 11 07:06:19 tuxpad kernel: CPU: After vendor identify, caps: 0383f9ff > 00000000 00000000 00000000 00000000 00000000 00000000 > Dec 11 07:06:19 tuxpad kernel: CPU: L1 I cache: 16K, L1 D cache: 16K > Dec 11 07:06:19 tuxpad kernel: CPU: L2 cache: 512K > Dec 11 07:06:19 tuxpad kernel: CPU: After all inits, caps: 0383f9ff 00000000 > 00000000 00000040 00000000 00000000 00000000 > Dec 11 07:06:19 tuxpad kernel: Intel machine check architecture supported. > Dec 11 07:06:19 tuxpad kernel: Intel machine check reporting enabled on CPU#0. > Dec 11 07:06:19 tuxpad kernel: Compat vDSO mapped to ffffe000. > Dec 11 07:06:19 tuxpad kernel: Checking 'hlt' instruction... OK. > Dec 11 07:06:19 tuxpad kernel: SMP alternatives: switching to UP code > Dec 11 07:06:19 tuxpad kernel: Freeing SMP alternatives: 16k freed > Dec 11 07:06:19 tuxpad kernel: ACPI: Core revision 20060707 > Dec 11 07:06:19 tuxpad kernel: ACPI: setting ELCR to 0200 (from 0800) > Dec 11 07:06:19 tuxpad kernel: CPU0: Intel Mobile Intel(R) Pentium(R) III > CPU - M 1200MHz stepping 04 > Dec 11 07:06:19 tuxpad kernel: SMP motherboard not detected. > Dec 11 07:06:19 tuxpad kernel: Local APIC not detected. Using dummy APIC > emulation. > Dec 11 07:06:19 tuxpad kernel: Brought up 1 CPUs > Dec 11 07:06:19 tuxpad kernel: migration_cost=0 > Dec 11 07:06:19 tuxpad kernel: checking if image is initramfs... it is > Dec 11 07:06:19 tuxpad kernel: Freeing initrd memory: 4759k freed > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 16 > Dec 11 07:06:19 tuxpad kernel: ACPI: bus type pci registered > Dec 11 07:06:19 tuxpad kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, > last bus=8 > Dec 11 07:06:19 tuxpad kernel: PCI: Using configuration type 1 > Dec 11 07:06:19 tuxpad kernel: Setting up standard PCI resources > Dec 11 07:06:19 tuxpad kernel: ACPI: Found ECDT > Dec 11 07:06:19 tuxpad kernel: ACPI: Interpreter enabled > Dec 11 07:06:19 tuxpad kernel: ACPI: Using PIC for interrupt routing > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 > 9 10 *11) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 > 9 10 *11) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 > 9 10 *11) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 > 9 10 *11) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 > 9 10 *11) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 > 9 10 11) *0, disabled. > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 > 9 10 11) *0, disabled. > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 > 9 10 11) *0, disabled. > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) > Dec 11 07:06:19 tuxpad kernel: PCI: Probing PCI hardware (bus 00) > Dec 11 07:06:19 tuxpad kernel: PCI quirk: region 1000-107f claimed by ICH4 > ACPI/GPIO/TCO > Dec 11 07:06:19 tuxpad kernel: PCI quirk: region 1180-11bf claimed by ICH4 > GPIO > Dec 11 07:06:19 tuxpad kernel: PCI: Ignoring BAR0-3 of IDE controller > 0000:00:1f.1 > Dec 11 07:06:19 tuxpad kernel: Boot video device is 0000:01:00.0 > Dec 11 07:06:19 tuxpad kernel: PCI: Firmware left 0000:02:08.0 e100 interrupts > enabled, disabling > Dec 11 07:06:19 tuxpad kernel: PCI: Transparent bridge - 0000:00:1e.0 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0._PRT] > Dec 11 07:06:19 tuxpad kernel: ACPI: Embedded Controller [EC] (gpe 28) > interrupt mode. > Dec 11 07:06:19 tuxpad kernel: ACPI: Power Resource [PUBS] (on) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.AGP_._PRT] > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.PCI1._PRT] > Dec 11 07:06:19 tuxpad kernel: Linux Plug and Play Support v0.97 (c) Adam > Belay > Dec 11 07:06:19 tuxpad kernel: pnp: PnP ACPI init > Dec 11 07:06:19 tuxpad kernel: pnp: PnP ACPI: found 13 devices > Dec 11 07:06:19 tuxpad kernel: PnPBIOS: Disabled by ACPI PNP > Dec 11 07:06:19 tuxpad kernel: PCI: Using ACPI for IRQ routing > Dec 11 07:06:19 tuxpad kernel: PCI: If a device doesn't work, > try "pci=routeirq". If it helps, post a report > Dec 11 07:06:19 tuxpad kernel: PCI: Bridge: 0000:00:01.0 > Dec 11 07:06:19 tuxpad kernel: IO window: disabled. > Dec 11 07:06:19 tuxpad kernel: MEM window: c0100000-c01fffff > Dec 11 07:06:19 tuxpad kernel: PREFETCH window: e0000000-ebffffff > Dec 11 07:06:19 tuxpad kernel: PCI: Bus 3, cardbus bridge: 0000:02:00.0 > Dec 11 07:06:19 tuxpad kernel: IO window: 00002000-000020ff > Dec 11 07:06:19 tuxpad kernel: IO window: 00002400-000024ff > Dec 11 07:06:19 tuxpad kernel: PREFETCH window: f0000000-f1ffffff > Dec 11 07:06:19 tuxpad kernel: MEM window: c2000000-c3ffffff > Dec 11 07:06:19 tuxpad kernel: PCI: Bus 7, cardbus bridge: 0000:02:00.1 > Dec 11 07:06:19 tuxpad kernel: IO window: 00002800-000028ff > Dec 11 07:06:19 tuxpad kernel: IO window: 00002c00-00002cff > Dec 11 07:06:19 tuxpad kernel: PREFETCH window: f2000000-f3ffffff > Dec 11 07:06:19 tuxpad kernel: MEM window: c4000000-c5ffffff > Dec 11 07:06:19 tuxpad kernel: PCI: Bridge: 0000:00:1e.0 > Dec 11 07:06:19 tuxpad kernel: IO window: 2000-6fff > Dec 11 07:06:19 tuxpad kernel: MEM window: c0200000-cfffffff > Dec 11 07:06:19 tuxpad kernel: PREFETCH window: f0000000-f7ffffff > Dec 11 07:06:19 tuxpad kernel: PCI: Setting latency timer of device > 0000:00:1e.0 to 64 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ > 11 > Dec 11 07:06:19 tuxpad kernel: PCI: setting IRQ 11 as level-triggered > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link > [LNKA] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ > 11 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:02:00.1[B] -> Link > [LNKB] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 2 > Dec 11 07:06:19 tuxpad kernel: IP route cache hash table entries: 32768 > (order: 5, 131072 bytes) > Dec 11 07:06:19 tuxpad kernel: TCP established hash table entries: 131072 > (order: 8, 1048576 bytes) > Dec 11 07:06:19 tuxpad kernel: TCP bind hash table entries: 65536 (order: 7, > 524288 bytes) > Dec 11 07:06:19 tuxpad kernel: TCP: Hash tables configured (established 131072 > bind 65536) > Dec 11 07:06:19 tuxpad kernel: TCP reno registered > Dec 11 07:06:19 tuxpad kernel: Simple Boot Flag at 0x35 set to 0x1 > Dec 11 07:06:19 tuxpad kernel: audit: initializing netlink socket (disabled) > Dec 11 07:06:19 tuxpad kernel: audit(1165817140.208:1): initialized > Dec 11 07:06:19 tuxpad kernel: highmem bounce pool size: 64 pages > Dec 11 07:06:19 tuxpad kernel: VFS: Disk quotas dquot_6.5.1 > Dec 11 07:06:19 tuxpad kernel: Dquot-cache hash table entries: 1024 (order 0, > 4096 bytes) > Dec 11 07:06:19 tuxpad kernel: Initializing Cryptographic API > Dec 11 07:06:19 tuxpad kernel: io scheduler noop registered > Dec 11 07:06:19 tuxpad kernel: io scheduler anticipatory registered > Dec 11 07:06:19 tuxpad kernel: io scheduler deadline registered > Dec 11 07:06:19 tuxpad kernel: io scheduler cfq registered (default) > Dec 11 07:06:19 tuxpad kernel: vesafb: framebuffer at 0xe8000000, mapped to > 0xf8880000, using 6144k, total 15168k > Dec 11 07:06:19 tuxpad kernel: vesafb: mode is 1024x768x32, linelength=4096, > pages=4 > Dec 11 07:06:19 tuxpad kernel: vesafb: protected mode interface info at > c000:9868 > Dec 11 07:06:19 tuxpad kernel: vesafb: pmi: set display start = c00c98ca, set > palette = c00c9913 > Dec 11 07:06:19 tuxpad kernel: vesafb: scrolling: redraw > Dec 11 07:06:19 tuxpad kernel: vesafb: Truecolor: size=8:8:8:8, > shift=24:16:8:0 > Dec 11 07:06:19 tuxpad kernel: Console: switching to colour frame buffer > device 128x48 > Dec 11 07:06:19 tuxpad kernel: fb0: VESA VGA frame buffer device > Dec 11 07:06:19 tuxpad kernel: isapnp: Scanning for PnP cards... > Dec 11 07:06:19 tuxpad kernel: isapnp: No Plug & Play device found > Dec 11 07:06:19 tuxpad kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 > ports, IRQ sharing enabled > Dec 11 07:06:19 tuxpad kernel: pnp: Device 00:0a activated. > Dec 11 07:06:19 tuxpad kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a > NS16550A > Dec 11 07:06:19 tuxpad kernel: RAMDISK driver initialized: 16 RAM disks of > 8192K size 1024 blocksize > Dec 11 07:06:19 tuxpad kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] > at 0x60,0x64 irq 1,12 > Dec 11 07:06:19 tuxpad kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 > Dec 11 07:06:19 tuxpad kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 > Dec 11 07:06:19 tuxpad kernel: mice: PS/2 mouse device common for all mice > Dec 11 07:06:19 tuxpad kernel: TCP bic registered > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 1 > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 17 > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 8 > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 20 > Dec 11 07:06:19 tuxpad kernel: Using IPI No-Shortcut mode > Dec 11 07:06:19 tuxpad kernel: ACPI: (supports S0 S3 S4 S5) > Dec 11 07:06:19 tuxpad kernel: Freeing unused kernel memory: 196k freed > Dec 11 07:06:19 tuxpad kernel: Time: tsc clocksource has been installed. > Dec 11 07:06:19 tuxpad kernel: input: AT Translated Set 2 keyboard > as /class/input/input0 > Dec 11 07:06:19 tuxpad kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > Dec 11 07:06:19 tuxpad kernel: ACPI: Thermal Zone [THM0] (37 C) > Dec 11 07:06:19 tuxpad kernel: usbcore: registered new driver usbfs > Dec 11 07:06:19 tuxpad kernel: usbcore: registered new driver hub > Dec 11 07:06:19 tuxpad kernel: Uniform Multi-Platform E-IDE driver Revision: > 7.00alpha2 > Dec 11 07:06:19 tuxpad kernel: ide: Assuming 33MHz system bus speed for PIO > modes; override with idebus=xx > Dec 11 07:06:19 tuxpad kernel: USB Universal Host Controller Interface driver > v3.0 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link > [LNKA] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: PCI: Setting latency timer of device > 0000:00:1d.0 to 64 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, > assigned bus number 1 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.0: irq 11, io base > 0x00001800 > Dec 11 07:06:19 tuxpad kernel: usb usb1: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: hub 1-0:1.0: USB hub found > Dec 11 07:06:19 tuxpad kernel: hub 1-0:1.0: 2 ports detected > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ > 11 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link > [LNKD] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: PCI: Setting latency timer of device > 0000:00:1d.1 to 64 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, > assigned bus number 2 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.1: irq 11, io base > 0x00001820 > Dec 11 07:06:19 tuxpad kernel: usb usb2: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: hub 2-0:1.0: USB hub found > Dec 11 07:06:19 tuxpad kernel: hub 2-0:1.0: 2 ports detected > Dec 11 07:06:19 tuxpad kernel: e100: Intel(R) PRO/100 Network Driver, > 3.5.10-k2-NAPI > Dec 11 07:06:19 tuxpad kernel: e100: Copyright(c) 1999-2005 Intel Corporation > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ > 11 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link > [LNKC] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: PCI: Setting latency timer of device > 0000:00:1d.2 to 64 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, > assigned bus number 3 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:00:1d.2: irq 11, io base > 0x00001840 > Dec 11 07:06:19 tuxpad kernel: usb usb3: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: hub 3-0:1.0: USB hub found > Dec 11 07:06:19 tuxpad kernel: hub 3-0:1.0: 2 ports detected > Dec 11 07:06:19 tuxpad kernel: Time: acpi_pm clocksource has been installed. > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ > 11 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link > [LNKE] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: e100: eth0: e100_probe: addr 0xc0200000, irq > 11, MAC addr 00:02:8A:21:A5:A6 > Dec 11 07:06:19 tuxpad kernel: usb 1-1: new low speed USB device using > uhci_hcd and address 2 > Dec 11 07:06:19 tuxpad kernel: ICH3M: IDE controller at PCI slot 0000:00:1f.1 > Dec 11 07:06:19 tuxpad kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> > 0007) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link > [LNKC] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: ICH3M: chipset revision 2 > Dec 11 07:06:19 tuxpad kernel: ICH3M: not 100%% native mode: will probe irqs > later > Dec 11 07:06:19 tuxpad kernel: ide0: BM-DMA at 0x1860-0x1867, BIOS > settings: hda:DMA, hdb:pio > Dec 11 07:06:19 tuxpad kernel: ide1: BM-DMA at 0x1868-0x186f, BIOS > settings: hdc:DMA, hdd:pio > Dec 11 07:06:19 tuxpad kernel: Probing IDE interface ide0... > Dec 11 07:06:19 tuxpad kernel: usb 1-1: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: usbcore: registered new driver hiddev > Dec 11 07:06:19 tuxpad kernel: input: USB Multimedia Keyboard > as /class/input/input1 > Dec 11 07:06:19 tuxpad kernel: input: USB HID v1.00 Keyboard [ USB Multimedia > Keyboard ] on usb-0000:00:1d.0-1 > Dec 11 07:06:19 tuxpad kernel: input: USB Multimedia Keyboard > as /class/input/input2 > Dec 11 07:06:19 tuxpad kernel: input: USB HID v1.00 Device [ USB Multimedia > Keyboard ] on usb-0000:00:1d.0-1 > Dec 11 07:06:19 tuxpad kernel: usbcore: registered new driver usbhid > Dec 11 07:06:19 tuxpad kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core > driver > Dec 11 07:06:19 tuxpad kernel: hda: IC25N040ATCS05-0, ATA DISK drive > Dec 11 07:06:19 tuxpad kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Dec 11 07:06:19 tuxpad kernel: Probing IDE interface ide1... > Dec 11 07:06:19 tuxpad kernel: hdc: SAMSUNG MP0402H, ATA DISK drive > Dec 11 07:06:19 tuxpad kernel: ide1 at 0x170-0x177,0x376 on irq 15 > Dec 11 07:06:19 tuxpad kernel: hda: max request size: 128KiB > Dec 11 07:06:19 tuxpad kernel: hda: 78140160 sectors (40007 MB) w/7898KiB > Cache, CHS=65535/16/63, UDMA(100) > Dec 11 07:06:19 tuxpad kernel: hda: cache flushes not supported > Dec 11 07:06:19 tuxpad kernel: hda: hda1 hda2 < hda5 hda6 > > Dec 11 07:06:19 tuxpad kernel: hdc: max request size: 512KiB > Dec 11 07:06:19 tuxpad kernel: hdc: 78242976 sectors (40060 MB) w/8192KiB > Cache, CHS=16383/255/63, UDMA(100) > Dec 11 07:06:19 tuxpad kernel: hdc: cache flushes supported > Dec 11 07:06:19 tuxpad kernel: hdc: hdc1 hdc2 > Dec 11 07:06:19 tuxpad kernel: Attempting manual resume > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: INFO: recovery required on readonly > filesystem. > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: write access will be enabled during > recovery. > Dec 11 07:06:19 tuxpad kernel: kjournald starting. Commit interval 5 seconds > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: hda1: orphan cleanup on readonly fs > Dec 11 07:06:19 tuxpad kernel: ext3_orphan_cleanup: deleting unreferenced > inode 196237 > Dec 11 07:06:19 tuxpad kernel: ext3_orphan_cleanup: deleting unreferenced > inode 196235 > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: hda1: 2 orphan inodes deleted > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: recovery complete. > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: mounted filesystem with ordered data > mode. > Dec 11 07:06:19 tuxpad kernel: intel_rng: FWH not detected > Dec 11 07:06:19 tuxpad kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Dec 11 07:06:19 tuxpad kernel: shpchp: Standard Hot Plug PCI Controller Driver > version: 0.4 > Dec 11 07:06:19 tuxpad kernel: Linux agpgart interface v0.101 (c) Dave Jones > Dec 11 07:06:19 tuxpad kernel: agpgart: Detected an Intel 830M Chipset. > Dec 11 07:06:19 tuxpad kernel: agpgart: AGP aperture is 256M @ 0xd0000000 > Dec 11 07:06:19 tuxpad kernel: input: PC Speaker as /class/input/input3 > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link > [LNKB] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: Yenta: CardBus bridge found at 0000:02:00.0 > [1014:023b] > Dec 11 07:06:19 tuxpad kernel: Yenta: Using INTVAL to route CSC interrupts to > PCI > Dec 11 07:06:19 tuxpad kernel: Yenta: Routing CardBus interrupts to PCI > Dec 11 07:06:19 tuxpad kernel: Yenta TI: socket 0000:02:00.0, mfunc > 0x01d21022, devctl 0x64 > Dec 11 07:06:19 tuxpad kernel: Real Time Clock Driver v1.12ac > Dec 11 07:06:19 tuxpad kernel: Yenta: ISA IRQ mask 0x04b8, PCI irq 11 > Dec 11 07:06:19 tuxpad kernel: Socket status: 30000020 > Dec 11 07:06:19 tuxpad kernel: pcmcia: parent PCI bridge I/O window: 0x2000 - > 0x6fff > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x2000-0x6fff: clean. > Dec 11 07:06:19 tuxpad kernel: pcmcia: parent PCI bridge Memory window: > 0xc0200000 - 0xcfffffff > Dec 11 07:06:19 tuxpad kernel: pcmcia: parent PCI bridge Memory window: > 0xf0000000 - 0xf7ffffff > Dec 11 07:06:19 tuxpad kernel: Yenta: CardBus bridge found at 0000:02:00.1 > [1014:023b] > Dec 11 07:06:19 tuxpad kernel: Yenta: Using INTVAL to route CSC interrupts to > PCI > Dec 11 07:06:19 tuxpad kernel: Yenta: Routing CardBus interrupts to PCI > Dec 11 07:06:19 tuxpad kernel: Yenta TI: socket 0000:02:00.1, mfunc > 0x01d21022, devctl 0x64 > Dec 11 07:06:19 tuxpad kernel: parport: PnPBIOS parport detected. > Dec 11 07:06:19 tuxpad kernel: parport0: PC-style at 0x3bc, irq 7 > [PCSPP,TRISTATE] > Dec 11 07:06:19 tuxpad kernel: irda_init() > Dec 11 07:06:19 tuxpad kernel: NET: Registered protocol family 23 > Dec 11 07:06:19 tuxpad kernel: IBM TrackPoint firmware: 0x0e, buttons: 3/3 > Dec 11 07:06:19 tuxpad kernel: Floppy drive(s): fd0 is 1.44M > Dec 11 07:06:19 tuxpad kernel: input: TPPS/2 IBM TrackPoint > as /class/input/input4 > Dec 11 07:06:19 tuxpad kernel: pnp: Device 00:0c activated. > Dec 11 07:06:19 tuxpad kernel: nsc_ircc_pnp_probe() : From PnP, found firbase > 0x2F8 ; irq 3 ; dma 1. > Dec 11 07:06:19 tuxpad kernel: nsc-ircc, chip->init > Dec 11 07:06:19 tuxpad kernel: nsc-ircc, Found chip at base=0x02e > Dec 11 07:06:19 tuxpad kernel: nsc-ircc, driver loaded (Dag Brattli) > Dec 11 07:06:19 tuxpad kernel: IrDA: Registered device irda0 > Dec 11 07:06:19 tuxpad kernel: nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 > Dec 11 07:06:19 tuxpad kernel: FDC 0 is a National Semiconductor PC87306 > Dec 11 07:06:19 tuxpad kernel: Yenta: ISA IRQ mask 0x0430, PCI irq 11 > Dec 11 07:06:19 tuxpad kernel: Socket status: 30000020 > Dec 11 07:06:19 tuxpad kernel: pcmcia: parent PCI bridge I/O window: 0x2000 - > 0x6fff > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x2000-0x6fff: clean. > Dec 11 07:06:19 tuxpad kernel: pcmcia: parent PCI bridge Memory window: > 0xc0200000 - 0xcfffffff > Dec 11 07:06:19 tuxpad kernel: pcmcia: parent PCI bridge Memory window: > 0xf0000000 - 0xf7ffffff > Dec 11 07:06:19 tuxpad kernel: PCI: Enabling device 0000:00:1f.5 (0000 -> > 0001) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link > [LNKB] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: PCI: Setting latency timer of device > 0000:00:1f.5 to 64 > Dec 11 07:06:19 tuxpad kernel: ts: Compaq touchscreen protocol output > Dec 11 07:06:19 tuxpad kernel: pccard: CardBus card inserted into slot 0 > Dec 11 07:06:19 tuxpad kernel: PCI: Enabling device 0000:03:00.0 (0000 -> > 0003) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link > [LNKA] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:03:00.0: UHCI Host Controller > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:03:00.0: new USB bus registered, > assigned bus number 4 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:03:00.0: irq 11, io base > 0x00002000 > Dec 11 07:06:19 tuxpad kernel: usb usb4: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: hub 4-0:1.0: USB hub found > Dec 11 07:06:19 tuxpad kernel: hub 4-0:1.0: 2 ports detected > Dec 11 07:06:19 tuxpad kernel: PCI: Enabling device 0000:03:00.1 (0000 -> > 0003) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:03:00.1[A] -> Link > [LNKA] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:03:00.1: UHCI Host Controller > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:03:00.1: new USB bus registered, > assigned bus number 5 > Dec 11 07:06:19 tuxpad kernel: uhci_hcd 0000:03:00.1: irq 11, io base > 0x00002020 > Dec 11 07:06:19 tuxpad kernel: usb usb5: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: hub 5-0:1.0: USB hub found > Dec 11 07:06:19 tuxpad kernel: hub 5-0:1.0: 2 ports detected > Dec 11 07:06:19 tuxpad kernel: pccard: CardBus card inserted into slot 1 > Dec 11 07:06:19 tuxpad kernel: intel8x0_measure_ac97_clock: measured 55736 > usecs > Dec 11 07:06:19 tuxpad kernel: intel8x0: clocking to 48000 > Dec 11 07:06:19 tuxpad kernel: PCI: Enabling device 0000:03:00.2 (0000 -> > 0002) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:03:00.2[A] -> Link > [LNKA] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: ehci_hcd 0000:03:00.2: EHCI Host Controller > Dec 11 07:06:19 tuxpad kernel: ehci_hcd 0000:03:00.2: new USB bus registered, > assigned bus number 6 > Dec 11 07:06:19 tuxpad kernel: ehci_hcd 0000:03:00.2: irq 11, io mem > 0xc2000200 > Dec 11 07:06:19 tuxpad kernel: ehci_hcd 0000:03:00.2: USB 2.0 started, EHCI > 1.00, driver 10 Dec 2004 > Dec 11 07:06:19 tuxpad kernel: usb usb6: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: hub 6-0:1.0: USB hub found > Dec 11 07:06:19 tuxpad kernel: hub 6-0:1.0: 4 ports detected > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x100-0x3af: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x3e0-0x4ff: excluding > 0x4d0-0x4d7 > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x820-0x8ff: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0xc00-0xcf7: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0xa00-0xaff: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x100-0x3af: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x3e0-0x4ff: excluding > 0x4d0-0x4d7 > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0x820-0x8ff: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0xc00-0xcf7: clean. > Dec 11 07:06:19 tuxpad kernel: cs: IO port probe 0xa00-0xaff: clean. > Dec 11 07:06:19 tuxpad kernel: Loaded prism54 driver, version 1.2 > Dec 11 07:06:19 tuxpad kernel: PCI: Enabling device 0000:07:00.0 (0000 -> > 0002) > Dec 11 07:06:19 tuxpad kernel: ACPI: PCI Interrupt 0000:07:00.0[A] -> Link > [LNKB] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:19 tuxpad kernel: usb 5-2: new low speed USB device using > uhci_hcd and address 2 > Dec 11 07:06:19 tuxpad kernel: usb 5-2: configuration #1 chosen from 1 choice > Dec 11 07:06:19 tuxpad kernel: input: Logitech USB-PS/2 Optical Mouse > as /class/input/input5 > Dec 11 07:06:19 tuxpad kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 > Optical Mouse] on usb-0000:03:00.1-2 > Dec 11 07:06:19 tuxpad kernel: Adding 1461872k swap on /dev/hda5. Priority:-1 > extents:1 across:1461872k > Dec 11 07:06:19 tuxpad kernel: EXT3 FS on hda1, internal journal > Dec 11 07:06:19 tuxpad kernel: loop: loaded (max 8 devices) > Dec 11 07:06:19 tuxpad kernel: ibm_acpi: IBM ThinkPad ACPI Extras v0.12a > Dec 11 07:06:19 tuxpad kernel: ibm_acpi: http://ibm-acpi.sf.net/ > Dec 11 07:06:19 tuxpad kernel: Non-volatile memory driver v1.2 > Dec 11 07:06:19 tuxpad kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) > initialised: [email protected] > Dec 11 07:06:19 tuxpad kernel: kjournald starting. Commit interval 5 seconds > Dec 11 07:06:19 tuxpad kernel: EXT3 FS on hda6, internal journal > Dec 11 07:06:19 tuxpad kernel: EXT3-fs: mounted filesystem with ordered data > mode. > Dec 11 07:06:19 tuxpad kernel: fuse init (API version 7.7) > Dec 11 07:06:19 tuxpad kernel: ACPI: Battery Slot [BAT0] (battery present) > Dec 11 07:06:19 tuxpad kernel: ACPI: AC Adapter [AC] (on-line) > Dec 11 07:06:19 tuxpad kernel: ACPI: Power Button (FF) [PWRF] > Dec 11 07:06:19 tuxpad kernel: ACPI: Lid Switch [LID] > Dec 11 07:06:19 tuxpad kernel: ACPI: Sleep Button (CM) [SLPB] > Dec 11 07:06:25 tuxpad kernel: input: /usr/sbin/thinkpad-keys > as /class/input/input6 > Dec 11 07:06:30 tuxpad kernel: [drm] Initialized drm 1.0.1 20051102 > Dec 11 07:06:30 tuxpad kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link > [LNKA] -> GSI 11 (level, low) -> IRQ 11 > Dec 11 07:06:30 tuxpad kernel: [drm] Initialized savage 2.4.1 20050313 on > minor 0 > Dec 11 07:06:30 tuxpad kernel: mtrr: base(0xe4000000) is not aligned on a > size(0x5000000) boundary > Dec 11 07:06:30 tuxpad kernel: agpgart: Found an AGP 2.0 compliant device at > 0000:00:00.0. > Dec 11 07:06:30 tuxpad kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 > into 4x mode > Dec 11 07:06:30 tuxpad kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 > into 4x mode > Dec 11 07:07:38 tuxpad kernel: NET: Registered protocol family 10 > Dec 11 07:07:38 tuxpad kernel: lo: Disabled Privacy Extensions > Dec 11 07:07:38 tuxpad kernel: IPv6 over IPv4 tunneling driver > Dec 11 07:08:03 tuxpad kernel: eth1: resetting device... > Dec 11 07:08:03 tuxpad kernel: eth1: uploading firmware... > Dec 11 07:08:03 tuxpad kernel: eth1: firmware version: 1.0.4.3 > Dec 11 07:08:03 tuxpad kernel: eth1: firmware upload complete > Dec 11 07:08:03 tuxpad kernel: eth1: interface reset complete > Dec 11 07:08:14 tuxpad kernel: eth1: no IPv6 routers present > > regards > > manne > > > > > > With Option "exa" in the xorg.conf X is nearly unusable. (extreme slow) > > > > that's because the savage driver does not yet accelerate composite or > > dfs operations. the default migration heuristic does not work well in > > these situations. Try "greedy". > > > > Alex > > > > > Is this error maybe related to mesa? Because I saw a similar error > > > message in a intel i8xxx bug report. > > > > > > How can i find the source of this problem? > > > > > > regards > > > > > > Manfred > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV --