Re: Debian Sid doesn't transcode a rip

The only relevant error in your log is:

"You must first rip the selected title to see this command. "

Rip the title onto harddisk first.

On 9/2/07, Jim McNamara <[email protected]> wrote:
>
> Hello all! I'm a new-ish dvdrip user on a debian sid system, and I can rip
> but not encode (or perhaps transcode would be the better verb). What I would
> like to have happen is to get a single .avi file from dvd::rip that contains
> the entire movie. The commands shown did not work from dvdrip. The transcode
> button stayed greyed out the entire time.
>
> Here are the relevant pieces of info:
>
> Program              Version
>   -------------------------------
>   dvd::rip             0.98.8
>   transcode            1.0.4
>   ImageMagick          6.2.4
>   ffmpeg               SVN-rUNKNOWN,
>   xvid4conf            1.12
>   subtitle2pgm         0.3
>   lsdvd                0.16
>   rar                  3.70
>   mplayer              cvs
>   ogmtools             1.5
>   dvdxchap             1.5
>   mjpegtools           1.8.0
>   xine                 0.99.5
>   fping                2.4
>   hal                  0.5.9
>   -------------------------------
>
> Probe Command:
> ==============
> execflow tcprobe -H 10 -i /dev/hdc -T 1 && echo EXECFLOW_OK; execflow
> dvdxchap -t 1 /dev/hdc 2>/dev/null
>
>
> Rip Command:
> ============
> rm -f /home/jim/music/dvd/american _warewolf/vob/001-C001//american_warewolf-???.vob
> && execflow -n 10 tccat -t dvd -T 1,1,1 -i \/dev\/hdc | dvdrip-splitpipe -f
> /home/jim/music/dvd/american_warewolf/tmp/american_warewolf-
> 001-C001-nav.log 1024
> /home/jim/music/dvd/american_warewolf/vob/001-C001//american_warewolf vob
> >/dev/null && echo EXECFLOW_OK
>
>
> Grab Preview Image Command:
> ===========================
> You must first rip the selected title to see this command.
>
>
> Transcode Command:
> ==================
> mkdir -m 0775 -p '/home/jim/music/dvd/american_warewolf/tmp' && cd
> /home/jim/music/dvd/american_warewolf/tmp && mkdir -p
> /home/jim/music/dvd/american_warewolf/avi/001 && execflow -n 10 transcode -H
> 10 -a 0 -x vob -i
> \/home\/jim\/music\/dvd\/american_warewolf\/vob\/001\-C001\/ -w 1868,50 -c
> 1-175064 -L 0 -b 128,0,2 -s 1.466 --a52_drc_off -f 30,4 -M 2 -y xvid -o
> /home/jim/music/dvd/american_warewolf/avi/001/american_warewolf-
> 001-C001.avi --print_status 25 && echo EXECFLOW_OK
>
>
> View DVD Command:
> =================
> mplayer dvd://1 -aid 128 -chapter 1 -dvdangle 1 -dvd-device \/dev\/hdc
>
>
> View Files Command:
> ===================
> mplayer movie.avi
>
>
> CD image creation command:
> ========================
> No files for image creation selected.
>
>
> CD burning command:
> ==================
> No files for burning selected.
>
>
> WAV creation command:
> ====================
> mkdir -p /home/jim/music/dvd/american_warewolf/avi/001 && execflow -n 10
> transcode -a 0 --print_status 200 -y null,wav -u 100 -o
> /home/jim/music/dvd/american_warewolf/avi/001/american_warewolf-
> 001-00-C01.wav -x null -i
> \/home\/jim\/music\/dvd\/american_warewolf\/vob\/001\-C001\/ -c 1-175064 -L
> 0 && echo EXECFLOW_OK
>
> The second half of the transcode command gave the desired output for the
> first chapter of the movie when I ran it at the command line, doing
> "execflow -n 10 transcode -H 10 -a 0 -x vob -i
> \/home\/jim\/music\/dvd\/american_warewolf\/vob\/001\-C001\/ -w 1868,50 -c
> 1-175064 -L 0 -b 128,0,2 -s 1.466 --a52_drc_off -f 30,4 -M 2 -y xvid -o
> /home/jim/music/dvd/american_warewolf/avi/001/american_warewolf-
> 001-C001.avi --print_status 25 && echo EXECFLOW_OK " from the directory
> /home/jim/music/dvd/american_warewolf/tmp.
>
> If you need any additional info, or would care to point out what newbie
> mistake I'm making, I would greatly appreciate it.
>



-- 
Arieh