Re: DVD::RIP fails but transcode doesn't... please help

Yes, I checked permissions, even made a new directory and tested.  Still the
same thing.  I have no idea why this is happening.  I have two other
computers running as nodes in a cluster and they work just fine when working
with the same project.

On 10/7/07, Laurence Barlow <[email protected]> wrote:
>
> I've had that before when I went routing about in the dvdrip-data
> directory, I moved some files and buggered up the permissions.
>
> For me it was a simple case of resetting the permissions.
>
> However I'm assuming you've checked that.
>
> -={Q}=-
>
> Derek Musselmann wrote:
> > I am having a problem transcoding a DVD to xvid.  Here is the error log
> from
> > DVDRIP:
> > Command exits with failure code:
> > Command: mkdir -m 0775 -p '/archive/work/dvdrip/breachDVD/tmp' && cd
> > /archive/work/dvdrip/breachDVD/tmp && mkdir -p
> > /archive/work/dvdrip/breachDVD/avi/001 && execflow -n 19 transcode -H 10
> -a
> > 0 -x vob -i \/archive\/work\/dvdrip\/breachDVD\/vob\/001\/ -w 429,50 -c
> > 3-503 -L 49007 -A -N 0x2000 -I 3 -f 24,1 -M 2 -Y 12,0,12,0 -B 15,10,8 -y
> > xvid4 -o /archive/work/dvdrip/breachDVD/avi/001/breachDVD-
> 001.avi--print_status
> > 25 && echo EXECFLOW_OK
> >
> > Output: transcode v1.0.4 (C) 2001-2003 Thomas Oestreich, 2003-2004 T.
> > Bitterberg, 2004-2007 Transcode Team
> > tc_memcpy: using sse for memcpy
> > [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio)
> MPEG/AC3/PCM |
> > (subtitle)
> > [export_xvid4.so] v0.0.6 (2007-08-11) (video) XviD 1.0.x series (aka API
> 4.0)
> > | (audio) MPEG/AC3/PCM
> > open file: Interrupted system call
> > [import_vob.so] failed to init stream sync mode
> > video import module error: OPEN failed
> > [transcode] critical: failed to open input source
> > [transcode] auto-probing source /archive/work/dvdrip/breachDVD/vob/001/
> > (failed)
> > [transcode] V: import format    | unknown  (V=vob|A=(null))
> > [transcode] V: AV demux/sync    | (2) initial MPEG sequence / enforce
> frame
> > rate
> > [transcode] V: import frame     | 720x576  1.25:1
> > [transcode] V: de-interlace     | (mode=3) zoom to full frame (slow)
> > [transcode] V: new aspect ratio | 640x456  1.40:1 (-B)
> > [transcode] V: clip frame (->)  | 640x432
> > [transcode] V: bits/pixel       | 0.065 (low)
> > [transcode] V: decoding fps,frc | 23.976,1
> > [transcode] V: Y'CbCr           | YV12/I420
> > [transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]
> > [transcode] A: export format    | 0x2000  AC3          [48000,16,2]    0
> > kbps
> > [transcode] V: encoding fps,frc | 23.976,1
> > [transcode] A: bytes per frame  | 8008 (8008.000000)
> > [transcode] A: adjustment       | 0@1000
> > [transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm C)
> > [transcode] V: video buffer     | 10 @ 720x576
> > [import_vob.so] tccat -i "/archive/work/dvdrip/breachDVD/vob/001/" -t
> vob -d
> > 0 -S 49007 | tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -a 0
> -x
> > ac3 -d 0 | tcextract -t raw -x ac3 -d 0
> > [import_vob.so] tccat -i "/archive/work/dvdrip/breachDVD/vob/001/" -t
> vob -d
> > 0 -S 49007 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P
> > /tmp/fileTjlq7a   -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode
> -x
> > mpeg2 -d 0 -y yv12
> >
> >
> > Now if I run the same command on the command line:
> >
> > % mkdir -m 0775 -p '/archive/work/dvdrip/breachDVD/tmp' && cd
> > /archive/work/dvdrip/breachDVD/tmp && mkdir -p
> > /archive/work/dvdrip/breachDVD/avi/001 && execflow -n 19 transcode -H 10
> -a
> > 0 -x vob -i \/archive\/work\/dvdrip\/breachDVD\/vob\/001\/ -w 429,50 -c
> > 3-503 -L 49007 -A -N 0x2000 -f 24,1 -M 2 -Y 12,0,12,0 -B 15,10,8 -R 1 -y
> > xvid4,null -o /dev/null --print_status 25 && echo EXECFLOW_OK
> > EXEC_FLOW_JOB_PID=93917
> > transcode v1.0.4 (C) 2001-2003 Thomas Oestreich, 2003-2004 T.
> Bitterberg,
> > 2004-2007 Transcode Team
> > [transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms
> > [transcode] auto-probing source /archive/work/dvdrip/breachDVD/vob/001/
> (ok)
> > [transcode] V: import format    | MPEG-2  (V=vob|A=vob)
> > [transcode] V: AV demux/sync    | (2) initial MPEG sequence / enforce
> frame
> > rate
> > [transcode] V: import frame     | 720x480  1.50:1  encoded @ 16:9
> > [transcode] V: new aspect ratio | 640x360  1.78:1 (-B)
> > [transcode] V: clip frame (->)  | 640x336
> > [transcode] V: bits/pixel       | 0.083 (low)
> > [transcode] V: decoding fps,frc | 23.976,1
> > [transcode] V: multi-pass       | (mode=1) writing data (pass 1) to
> > divx4.log
> > [transcode] V: Y'CbCr           | YV12/I420
> > [transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]  448
> > kbps
> > [transcode] A: export           | disabled
> > [transcode] V: encoding fps,frc | 23.976,1
> > [transcode] A: bytes per frame  | 8008 (8008.000000)
> > [transcode] A: adjustment       | 0@1000
> > [transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm C)
> > tc_memcpy: using sse for memcpy
> > [transcode] V: video buffer     | 10 @ 720x480
> > [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio)
> MPEG/AC3/PCM |
> > (subtitle)
> > [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
> > [export_xvid4.so] v0.0.6 (2007-08-11) (video) XviD 1.0.x series (aka API
> 4.0)
> > | (audio) MPEG/AC3/PCM
> > [import_vob.so] tccat -i "/archive/work/dvdrip/breachDVD/vob/001/" -t
> vob -d
> > 0 -S 49007 | tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -a 0
> -x
> > ac3 -d 0 | tcextract -t raw -x ac3 -d 0
> > [import_vob.so] tccat -i "/archive/work/dvdrip/breachDVD/vob/001/" -t
> vob -d
> > 0 -S 49007 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P
> > /tmp/fileoMZExP   -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode
> -x
> > mpeg2 -d 0 -y yv12
> > tc_memcpy: using sse for memcpy
> > tc_memcpy: using sse for memcpy
> > tc_memcpy: using sse for memcpy
> > [decode_mpeg2.c] libmpeg2 acceleration: mmxext[export_xvid4.so] Reading
> > configuration from './xvid4.cfg'
> > [export_xvid4.so] Reading config section 'features' from './xvid4.cfg'
> > [export_xvid4.so] Reading config section 'quantizer' from './xvid4.cfg'
> > [export_xvid4.so] Reading config section 'cbr' from './xvid4.cfg'
> > [export_xvid4.so] Reading config section 'vbr' from './xvid4.cfg'
> > (ac3scan.c) AC3 frame 1792 (2336) bytes | bitrate 448 kBits/s | depsize
> 8008
> > | rbytes 2335.666667
> >
> > [encoder.c] Delaying audio (0)
> > [encoder.c] Delaying audio (0)
> > ^Ccoding frame [75],  38.44 fps, 14.4%, ETA: 0:00:11, ( 0| 0| 7)
> > [transcode] (sighandler) SIGINT received
> >
> > clean up | frame threads | unload modules | cancel signal | internal
> threads
> > | done
> > [transcode] encoded 82 frames (0 dropped, 0 cloned), clip length   3.42s
> > %
> >
> > Has anyone seen this before?
> >
> > This was working last week and I don't know what happened to my
> setup.  The
> > other two boxes in my cluster are working fine.
> >
> >
> > Thanks
> >
>
>


-- 
Derek Musselmann
President/CEO - Disflux, Inc.
[email protected]