Re: Building the GIMP Under Windows
"boneyjose" <[email protected]>
| Newsgroups | gmane.comp.video.gimp.windows.devel |
|---|---|
| Message-ID | <[email protected]> |
Ha !!!
Yes I downloaded a wrong copy. now I run the ./configure.kam
here is the few end result output
checking for finite... yes
checking for extra flags for POSIX compliance... none needed
checking for XmuClientWindow in -lXmu... no
checking for XmuUpdateMapHints in -lXmu... no
configure: WARNING: *** webbrowser plug-in and gimp-remote will not be
built (XMU library not found) ***
checking for aa_printf in -laa... no
configure: WARNING: *** AA plug-in will not be built (AA library not
found) ***
checking for TIFFReadScanline in -ltiff... no
checking for TIFFWriteScanline in -ltiff... no
checking for TIFFFlushData in -ltiff34... no
configure: WARNING: *** TIFF plug-in will not be built (TIFF library
not found) ***
configure: error:
*** Checks for TIFF libary failed. You can build without it by passing
*** --without-libtiff to configure but you won't be able to use TIFFs then
I could't see any MakeFile gettting generated and could you tell me
what make you are using.
regards
Boney Jose
--- In gimpwin-dev@y..., "Kevin Myers" <kevinmyers@a...> wrote:
> Strange, there is a configure file in the copy of that package which
I downloaded. The file is dated 9/7/2002 and the size is 829KB.
Maybe you just missed it?
> ----- Original Message -----
> From: boneyjose
> To: gimpwin-dev@y...
> Sent: Monday, October 28, 2002 9:30 AM
> Subject: [gimpwin-dev] Re: Building the GIMP Under Windows
>
>
> Hi Kevin,
>
> I followed all your steps , at the last only I found there is no
> configure file in gimp-1.2.4-tml-20020907-src package, could you tell
> me where you got the configure fie or you could send me one you
are using.
>
> regards
>
> Boney Jose
>
> --- In gimpwin-dev@y..., "Kevin Myers" <kevinmyers@a...> wrote:
> > Left out one key point: Had to disable Norton Protected Recycle Bin
> in order for the build to work correctly. Otherwise received sporadic
> file permission errors.
> >
> > ----- Original Message -----
> > From: Kevin Myers
> > To: gimpwin developers
> > Sent: Sunday, October 27, 2002 12:30 AM
> > Subject: [gimpwin-dev] Building the GIMP Under Windows
> >
> >
> > Hello folks,
> >
> > Below is a detailed list of my steps for building the gimp under
> Windows, as best as I can reconstruct them. Please let me know if
> anything appears to be missing, or if you see anything that I
> could/should have done differently.
> >
> > ***WARNING*** I am a rank amateur at this stuff. There could
> easily be steps that should have been done differently. Also, I put
> this together largely from memory and from looking back over my files,
> as I don't have time to go through it all again to make certain that I
> haven't left anything out. So, I could have easily omitted a few
> necessary steps as well. In spite of any omissions or inaccuracies, I
> hope that this may at least serve as a decent starting point for some
> of you, and to help get you through some of the hurdles that I ran
into.
> >
> > If someone (Tor?) has a handy web site where this could be
> permanently posted, and corrected/updated as folks offer additional
> comments, that would be great!
> >
> > Finally, I know that quite a bit of this manual grunge should NOT
> be necessary. But I'm not enough of an expert at
> autoconf/automake/libtool to figure out how to correct and enhance the
> existing scripts the right way, and don't have any additional time to
> spend on that at the moment anyway. If someone else wanted to try to
> help make this process more automated like it really should be, that
> would be great too!!!
> >
> > All comments, suggestions, additions, and corrections appreciated.
> >
> > s/KAM
> >
> >
> > Building GIMP 1.2.4 Under Windows using MinGW/mSys:
> >
> > 1. Download the MinGW installable binary image from
> http://prdownloads.sourceforge.net/mingw/MinGW-2.0.0-3.exe?download,
> and execute the downloaded file to install MinGW. Accept all default
> settings during installation.
> >
> > 2. Download the mSys installable binary image from
>
http://prdownloads.sourceforge.net/mingw/MSYS-1.0.7-i386-2.exe?download,
> and execute the downloaded file to install mSys. Accept all default
> settings during installation. Note there are also i586 and i686
> versions. Those would probably work also.
> >
> > 3. In the above steps, be sure to allow MinGW's make.exe to be
> renamed to something else, so that the mSys make.exe will be used
instead.
> >
> > 4. Download all of the following packages via the links on Tor's
> gimpwin downloads page
> (http://www.gimp.org/~tml/gimp/win32/downloads.html). More direct
> links to some of the files are provided for your convenience:
> >
> > libiconv binary and developer's package -
>
http://prdownloads.sourceforge.net/gettext/libiconv-1.7-w32.bin.zip?download
> > libintl developer's package -
> http://www.gimp.org/~tml/gimp/win32/libintl-0.10.40-tml-20020904.zip
> > gettext developer's package -
> http://www.gimp.org/~tml/gimp/win32/gettext-dev-0.10.40-20020904.zip
> > glib 2.0 developer's package -
> http://www.gimp.org/~tml/gimp/win32/glib-dev-2.0.6-20020802.zip
> > pkgconfig 0.13 binary package -
> http://www.gimp.org/~tml/gimp/win32/pkgconfig-0.13.zip
> > gtk+ 1.3 developer's package -
> http://www.gimp.org/~tml/gimp/win32/gtk+-dev-1.3.0-20020912.zip
> > gimp 1.2.4 source -
> http://www.gimp.org/~tml/gimp/win32/gimp-1.2.4-tml-20020907-src.zip
> > zlib developer's package -
>
http://prdownloads.sourceforge.net/gnuwin32/zlib-1.1.4-lib.zip?download
> > libpng developer's package -
>
http://prdownloads.sourceforge.net/gnuwin32/libpng-1.2.4-1-lib.zip?download
> > libjpeg developer's package -
>
http://prdownloads.sourceforge.net/gnuwin32/libjpeg-6b-lib.zip?download
> > libtiff developer's package -
>
http://prdownloads.sourceforge.net/gnuwin32/tiff-3.5.7-lib.zip?download
> > freetype developer's package -
>
http://prdownloads.sourceforge.net/gnuwin32/freetype-2.1.2-1-lib.zip?download
> > Tor's gimp pspi plug-in source package -
> http://www.gimp.org/~tml/gimp/win32/gimp-pspi-1.0.2-src.zip
> >
> > I also downloaded and built pkgconfig 0.14.0, and can provide
> instructions for how to do that if anyone is interested. However, I
> don't think that is actually required to build the gimp.
> >
> > I also made rather brief attempts to download, build, and/or use
> each of the following, but ran into various problems and did NOT end
> up using these. As a result, there were perhaps a half dozen or so of
> the gimp plug-ins that could not be built. However, at least two of
> those (gimp-print and web browser) were things that I didn't care
> about anyway, since equivalent functionality (printing and web
> browser) is provided under Windows by other means:
> >
> > aa library - couldn't figure out where to get this one
> > gimp-print source package -
>
http://prdownloads.sourceforge.net/gimp-print/gimp-print-4.2.3.tar.gz?download
> > mpeg source package - can't remember where I found this one
> > xpm 4.0.3 developer's package -
> http://www.gimp.org/~tml/gimp/win32/xpm-nox-dev-4.0.3-20020112.zip
> > perl 5.6.1 installable binary distribution -
>
http://downloads.activestate.com/ActivePerl/Windows/5.6/ActivePerl-5.6.1.633-MSWin32-x86.msi
> >
> > Finally, I did not attempt to build any of the "unofficial" gimp
> plug-ins.
> >
> > Maybe someone else can do better regarding the above issues.
> >
> > 5. Use WinZip (or extractor of your choice) to extract each of the
> previously downloaded packages into the following directory structure
> (generally one package per subdirectory, only top level of each
> subdirectory listed below):
> >
> > d:\source\freetype-2.1.2-1-lib
> > d:\source\gettext-dev-0.10.40-20020904
> > d:\source\gimp-1.2.4 - (This was a subdirectory of the
> gimp-1.2.4-tml-20020907-src package.)
> > d:\source\gimp-print-4.2.3.tar
> > d:\source\gimp-pspi-1.0.2-src
> > d:\source\glib-dev-2.0.6-20020802
> > d:\source\gtk+-dev-1.3.0-20020912
> > d:\source\libiconv-1.7-w32.bin
> > d:\source\libintl-0.10.40-tml-20020904
> > d:\source\libjpeg-6b-lib
> > d:\source\libpng-1.2.4-1-lib
> > d:\source\mpeg2dec-0.2.1-cvs
> > d:\source\pkgconfig-0.13
> > d:\source\tiff-3.5.7-lib
> > d:\source\unofficial-plug-ins - (This was a subdirectory of the
> gimp-1.2.4-tml-20020907-src package.)
> > d:\source\xpm-nox-dev-4.0.3-20020112
> > d:\source\zlib-1.1.4-lib
> >
> > 6. Per Tor's instructions: Move the DLLs and LIBs from
> d:\source\libiconv-1.7-w32.bin into d:\source\libiconv-1.7-w32\lib,
> and move the EXE file into d:\source\libiconv-1.7-w32.bin\bin. Copy
> d:\source\libiconv-1.7-w32.bin\lib\iconv.lib to
> d:\source\libiconv-1.7-w32.bin\lib\libiconv.a.
> >
> > 7. Fire up mSys using the supplied Start Menu shortcut under the
> MinGW group.
> >
> > 8. mkdir /usr/local/bin, /usr/local/lib, and /target
subdirectories.
> >
> > 9. Copy all of the following files into /usr/local/lib: iconv.dll
> and localcharset.dll from /d/source/libiconv-1.7-w32/lib, and
> libintl-1.dll from /d/source/libintl-0.10.40-tml-20020904/lib.
> >
> > 10. Copy all of the following files into /usr/local/bin: all eight
> *.exe files from /d/source/gettext-dev-0.10.40-20020904/bin, all files
> from /d/source/glib-dev-2.0.6-20020802/bin, iconv.exe from
> /d/source/libiconv-1.7-w32.bin/bin, pkg-config.exe from
> /d/source/pkgconfig-0.13/bin, cxpm.exe from
> /d/source/xpm-nox-dev-4.0.3-20020112/bin to /usr/local/bin.
> >
> > 11. cd into d:\source\gimp-1.2.4 .
> >
> > 12. Create a file named configure.kam with the following contents:
> >
> > #!/bin/sh
> >
> > export PKG_CONFIG_PATH=\
> > D:\\source\\gettext-dev-0.10.40-20020904\\lib\\pkgconfig\;\
> > D:\\source\\glib-dev-2.0.6-20020802\\lib\\pkgconfig\;\
> > D:\\source\\gtk+-dev-1.3.0-20020912\\lib\\pkgconfig
> > echo PKG_CONFIG_PATH=$PKG_CONFIG_PATH
> >
> > # specify any necessary compiler flags here
> > export CFLAGS='-mcpu=pentiumpro'
> > echo CFLAGS=$CFLAGS
> >
> > # specify pre-processor flags here, with any required include
> paths (-I)
> > export CPPFLAGS=\
> > -I/d/source/libiconv-1.7-w32.bin/include\ \
> > -I/d/source/gettext-dev-0.10.40-20020904/include\ \
> > -I/d/source/glib-dev-2.0.6-20020802/include/glib-2.0\ \
> > -I/d/source/gtk+-dev-1.3.0-20020912/include/gdk\ \
> > -I/d/source/gtk+-dev-1.3.0-20020912/include/gtk\ \
> > -I/d/source/zlib-1.1.4-lib/include\ \
> > -I/d/source/libpng-1.2.4-1-lib/include\ \
> > -I/d/source/libjpeg-6b-lib/include\ \
> > -I/d/source/tiff-3.5.7-lib/include\ \
> > -I/d/source/freetype-2.1.2-1-lib/include\ \
> > -I/d/source/xpm-nox-dev-4.0.3-20020112/include
> > echo CPPFLAGS=$CPPFLAGS
> >
> > # specify linker flags here, with any required library paths (-L)
> > export LDFLAGS=\
> > -L/d/source/libiconv-1.7-w32.bin/lib\ \
> > -L/d/source/libintl-0.10.40-tml-20020904/lib\ \
> > -L/d/source/gettext-dev-0.10.40-20020904/lib\ \
> > -L/d/source/glib-dev-2.0.6-20020802/lib\ \
> > -L/d/source/gtk+-dev-1.3.0-20020912/lib\ \
> > -L/d/source/zlib-1.1.4-lib/lib\ \
> > -L/d/source/libpng-1.2.4-1-lib/lib\ \
> > -L/d/source/libjpeg-6b-lib/lib\ \
> > -L/d/source/tiff-3.5.7-lib/lib\ \
> > -L/d/source/freetype-2.1.2-1-lib/lib\ \
> > -L/d/source/xpm-nox-dev-4.0.3-20020112/lib
> > echo LDFLAGS=$LDFLAGS
> >
> > ./configure --disable-static --disable-perl --disable-print
> --srcdir=`pwd` --prefix=`pwd`
> >
> > 13. Edit Makefile.in (and/or Makefile.am if desired), remove the
> line for intl from the SUBDIRS variable.
> >
> > 14. Edit configure (and/or configure.in if desired), replace all
> occurances of -fnative-struct with -mms-bitfields.
> >
> > 15. Edit ./app/Makefile.in (and/or Makefile.am if desired), and
> add the following dependency info for gimp.def:
> >
> > # 2002/10/24 KAM added gimp.def to correct omission per email
> thread with Tor Lillqvist
> > gimp.def: gimp.sym
> > echo EXPORTS >$@
> > cat $< >>$@
> >
> > 16. Edit ./build/win32/compile-resource, replace bash with sh in
> the first line.
> >
> > 17. Edit ./build/win32/make.mingw, replace all occurances of
> -fnative-struct with -mms-bitfields.
> >
> > There were a few additional changes that I made which I later
> decided probably weren't necessary, so I have not included those
> changes here. I don't have time to do things over and confirm for
> certain whether they really weren't needed. If you run into any
> problems (watch out for error messages related to regarding DATADIR
> and libgimpapp.a) then let me know and I can provided additional info.
> >
> > 18. Run ./configure.kam . It should get all the way through with
> warnings about a few plug-ins that won't be built.
> >
> > 19. Run make . If things are working as they did for me, this
> should build everything in the tools, libgimp, app, plugins, and
> modules subdirectories. Then make will abort with an error in the po
> subdirectory.
> >
> > 20. cd into each of the po, po-libgimp, po-plugins, po-script-fu,
> and tips subdirectories, and run make -f makefile.mingw in each one
> separately.
> >
> > 21. cd into each of the data, help, devel-docs, and build
> subdirectories, and run make in each one separately.
> >
> > 22. Repeat steps 19 through 21, except adding the install
> parameter to each of the make commands.
> >
> > 23. Copy all subdirectories of /target recursively into
> /d/source/gimp-1.2.4. This will merge their contents into
> subdirectories of the same names that have already been created by
> other steps, and is necessary due to hardcoded paths in some of the
> makefile.mingw files that I didn't feel like changing.
> >
> > 24. If I haven't omitted any steps (there were too many, I could
> have easily forgotten a few), then you should now have a copy of the
> gimp executable in /d/source/gimp-1.2.4/bin/gimp.exe. Try running
> that from Windows. It should start up ok, but you will notice that
> many features are missing from the menus.
> >
> > 25. Go into the File->Preferences dialogue, and expand the
> Directories preferences. Set appropriate directories for temp and
> swap directories. Point Brushes to
> D:\source\gimp-1.2.4\share\gimp\1.2\brushes. Point Patterns to
> D:\source\gimp-1.2.4\share\gimp\1.2\patterns. Point Palettes to
> D:\source\gimp-1.2.4\share\gimp\1.2\palettes. Point gradients to
> D:\source\gimp-1.2.4\share\gimp\1.2\gradients. Point plug-ins to
> D:\source\gimp-1.2.4\lib\gimp\1.2\plug-ins. There may be a few
> additional directory settings that would be appropriate, especially
> for Modules and Generated Brushes, but I didn't know what to set those
> to. I'd be curious to know if the tail end of the regular make script
> that was never executed would have normally handled these things...?
> I didn't have time to investigate.
> >
> > 26. Exit and re-start the gimp. At this point, most everything in
> the gimp except for a few specific plug-ins should be operational.
> >
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> >
> > To Post a message, send it to: gimpwin-dev@e...
> > To Unsubscribe, send a blank message to:
gimpwin-dev-unsubscribe@e...
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> To Post a message, send it to: gimpwin-dev@e...
> To Unsubscribe, send a blank message to: gimpwin-dev-unsubscribe@e...
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.