IRC Logs

*******************************************************************
[03:30] thaytan ([email protected]) left irc: Remote closed the connection
[03:32] thaytan ([email protected]) joined #gstreamer.
[03:39] bitshifter ([email protected]) left irc: "bye"
[03:39] bitshifter ([email protected]) joined #gstreamer.
[03:57] mariano ([email protected]) left #gstreamer ("Leaving").
[04:00] walters ([email protected]) left irc: "out"
[04:02] mxpxpod ([email protected]) left irc: Read error: 110 (Connection timed out)
[04:22] mxpxpod ([email protected]) joined #gstreamer.
[05:09] khalek ([email protected]) joined #gstreamer.
[05:12] dcharno ([email protected]) joined #gstreamer.
[05:29] harshy ([email protected]) left irc: "I quit for now"
[05:30] jcsston` ([email protected]) joined #gstreamer.
[05:36] Rotty ([email protected]) joined #gstreamer.
[05:49] <dcharno> Are there any shoutcast src other than gnomevfssrc?
[05:55] jcsston ([email protected]) left irc: Read error: 110 (Connection timed out)
[06:04] Nick change: jcsston` -> jcsston
[06:10] bitshifter ([email protected]) left irc: "bye"
[06:11] <thaytan> dcharno: I don't think so
[06:17] <dcharno> gnomevfssrc seems a bit unstable; it works only about 50% of the time.
[06:17] bitshifter ([email protected]) joined #gstreamer.
[06:23] Rotty ([email protected]) left irc: Remote closed the connection
[06:40] <thaytan> dcharno: give us specific failures in bugzilla and we'll look into it
[06:43] <dcharno> thaytan: ok. thanks.
[08:02] harshy ([email protected]) joined #gstreamer.
[08:10] ChrisHJW ([email protected]) joined #gstreamer.
[08:37] spyder482 ([email protected]) left irc: "Leaving"
[08:50] somex1 ([email protected]) left #gstreamer.
[09:00] Nick change: khalek -> kh_out
[09:21] markey ([email protected]) joined #gstreamer.
[09:45] apoc_ ([email protected]) left irc: "Leaving"
[10:00] jcsston ([email protected]) left irc: Read error: 110 (Connection timed out)
[10:19] pmfp ([email protected]) joined #gstreamer.
[10:20] pmfp ([email protected]) left irc: Remote closed the connection
[10:20] pmfp ([email protected]) joined #gstreamer.
[10:24] kwm ([email protected]) joined #gstreamer.
[10:40] pmfp ([email protected]) left irc: "Leaving"
[10:48] sublett ([email protected]) joined #gstreamer.
[10:59] Nick change: mathrick|sleep -> mathrick
[10:59] <mathrick> re
[11:11] Nick change: markey -> markey|afk
[11:16] apoc ([email protected]) joined #gstreamer.
[11:17] <apoc> hi
[11:18] bilboed ([email protected]) joined #gstreamer.
[11:19] teuf ([email protected]) joined #gstreamer.
[11:27] <apoc> hi teuf
[11:27] <teuf> morning
[11:28] <apoc> teuf: do you know what is the status of the shn plugin ?
[11:29] <teuf> it used to be able to read shorten files (with on seeking or anything), then got broken after the caps changes
[11:29] <teuf> I have a patch to make it compile with the new caps system, but I haven't tested it yet
[11:30] <apoc> you don't have a encoder for this format, right ?
[11:31] <teuf> apoc: nope, and I don't want one, my only goal when writing this plugin was to be able to do shn->flac conversions
[11:31] <apoc> teuf: hm I think I should remove the monkeys audio encoder too ;)
[11:47] <teuf> anyone know what that means ?
[11:47] <teuf>  oss(17861) gstosssink.c(372):gst_osssink_chain:<osssink0> need sync: element 1088435, real 34829931, buffer: 139319727
[11:50] <teuf> ok, gstreamer was complaining about badly timestamped buffers
[11:55] <teuf> does anyone know what is the difference between width and depth for an audio element ?
[11:57] <thaytan> one is the number of bits per sample
[11:57] <thaytan> the other is the number of bits that's carrying them
[11:57] <thaytan> eg, 15 bits depth will be carried in 16 bit wide data
[11:57] <teuf> ok, so they will be equal for most audio formats ?
[11:57] <thaytan> yeah
[11:57] <teuf> thanks
[11:57] <thaytan> the most common ones, anyway
[12:04] <teuf> anyone with cvs access who could commit a patch in gst-sandbox/gst-shorten ?
[12:08] <thaytan> pop in into bugzilla 
[12:13] <teuf> I filed http://bugzilla.gnome.org/show_bug.cgi?id=135038
[12:19] <apoc> teuf: I'll have a look 
[12:27] <teuf> hmm, I thought company had fixed tag transcoding?
[12:33] <thaytan> me too
[12:38] Nick change: mathrick -> mathrick|away
[12:40] <teuf> there was still a small bug in the lame element
[12:40] <teuf> things should work fine now
[12:41] thaytan ([email protected]) left irc: Remote closed the connection
[12:42] thaytan ([email protected]) joined #gstreamer.
[12:43] <apoc> Do someone know which soft provides the play command ? (for nautilus preview)
[12:44] <thaytan> you're probably looking at the audio-view from the nautilus-media module
[12:45] <apoc> no just sound preview with the cursor (ogg works but not mp3)
[12:48] <thaytan> I don't know that
[12:48] <thaytan> it doesn't do it for me
[13:00] casaxno ([email protected]) joined #gstreamer.
[13:02] <apoc> salut casaxno :)
[13:03] <casaxno> salut 
[13:05] <casaxno> excuse de te poser cette question mais on se connait?
[13:10] KoRnouille ([email protected]) left irc: Client Quit
[13:12] Action: thaytan translates that as 'excuse me while I pose for questions on the connait'
[13:12] <thaytan> so, what's a connait?
[13:13] <bilboed> lol
[13:13] <teuf> thaytan: on se connait is mor or less  "do I know you?"
[13:13] KoRnouille ([email protected]) joined #gstreamer.
[13:13] <thaytan> I'll add that to my repertoire for when I'm in France in April :)
[13:13] mathrick|away ([email protected]) left irc: Read error: 104 (Connection reset by peer)
[13:15] markey|afk ([email protected]) left irc: "leaving"
[13:17] <casaxno> sorry for speaking in french, i speak english too.
[13:17] <thaytan> that's fine :)
[13:17] <thaytan> je suis umm.. having fun :)
[13:17] <KoRnouille> hello all
[13:18] <casaxno> lol
[13:18] <KoRnouille> hello french boy
[13:18] <KoRnouille> (or girl)
[13:19] <casaxno> french guy who loves americans girls
[13:19] <KoRnouille> <-- french guy who loves girls in general... :)
[13:32] <bilboed> casaxno is one of the other devs of the nonlinear editor project
[13:34] <thaytan> where are you guys located?
[13:34] <thaytan> I should know this already, I think
[13:34] <bilboed> thaytan: physically located ?
[13:35] <thaytan> yah, which city?
[13:35] Action: KoRnouille is from Paris, FRANCE
[13:35] <bilboed> Paris, France
[13:35] <apoc> casaxno: heu non pas spécialement ;)
[13:36] Action: teuf is in Aix en Provence, much better ;)
[13:36] <KoRnouille> :p
[13:36] Action: bilboed slams teuf with a chunk of ice
[13:36] <teuf> the weather sucks today though
[13:36] <bilboed> :)
[13:36] <bilboed> there is a justice
[13:38] <thaytan> my girlfriend and I are going to be staying in Paris on the 7th and 8th April
[13:38] <thaytan> if you want to grab some beer :)
[13:38] <teuf> anyone know why vorbisenc isn't using the stuff from gstvorbistag for its metadata handling ?
[13:38] <bilboed> thaytan: sure :)
[13:39] <casaxno> sure, there is lots of irish pubs in paris
[13:40] <KoRnouille> :D
[13:40] <thaytan> hey, Australia too
[13:40] <KoRnouille> if the gst-python module working fine ?
[13:40] <thaytan> those darn irish, they got everywhere :)
[13:40] <KoRnouille> s/if/is/
[13:40] <thaytan> KoRnouille: works for me, yeah
[13:40] <KoRnouille> you can do all you want ?
[13:41] <thaytan> taaz is the man for that
[13:41] <KoRnouille> 0.7.x ?
[13:41] <thaytan> I don't know that everything is working, but a lot of things are for me
[13:41] <KoRnouille> ok
[13:42] <KoRnouille> what will I need for talking with the X for python (im new to that)
[13:42] <KoRnouille> gtk
[13:42] <KoRnouille> for python
[13:42] <bilboed> KoRnouille: pygtk
[13:42] <KoRnouille> ok
[13:42] <casaxno> yes pyGTK
[13:43] <KoRnouille> im glad I see python a little bit everywhere
[13:43] <KoRnouille> because Im having in mind to learn really well 2 languages, python and C
[13:43] <thaytan> Python is a good language
[13:43] <KoRnouille> I know much more python than C btw
[13:59] <KoRnouille> thaytan: im trying to install gst-python, while ./configure I get an error : checking for gstreamer-0.6 >= 0.6.0... Package gstreamer-0.6 was not found in the pkg-config search path.
[14:00] <thaytan> using CVS?
[14:00] <KoRnouille> I need 0.6 to have python running ?
[14:00] <KoRnouille> aaah nop
[14:00] <KoRnouille> tarball
[14:00] <KoRnouille> cvs only for 0.7 ?
[14:00] <thaytan> you'll need cvs for 0.7
[14:00] <thaytan> taaz hasn't rolled a release, no
[14:00] <KoRnouille> http://freedesktop.org/cgi-bin/viewcvs.cgi/gstreamer/gst-python/
[14:01] <KoRnouille> do I have to do download tarball ?
[14:01] <KoRnouille> from this cvs page ?
[14:02] <KoRnouille> or do I have to make some cvs commands like "cvs :serverblablab bla co gst-python"
[14:02] <thaytan> you need a cvs checkout, yeah
[14:02] <thaytan> cvs -z3 -d:pserver:[email protected]:/cvs/gstreamer co gst-python
[14:02] sublett ([email protected]) left irc: "I like food, food is good!"
[14:04] <KoRnouille> thanks
[14:05] <KoRnouille> damnit
[14:05] <KoRnouille> aaah non... not damnit... :)
[14:12] Rotty ([email protected]) joined #gstreamer.
[14:13] <KoRnouille> when I install pygtk2, I get many errors like "Could not write method AtkObject.connect_property_change_handler"... Can I ignore this ?
[14:17] <thaytan> I don't actually know what that is complaining about
[14:17] <thaytan> possibly that you don't have atk stuff installed
[14:18] <KoRnouille> hummm... it's not asked when ./configure
[14:18] <thaytan> if the build completes, I'd say it's ok
[14:24] <KoRnouille> argh
[14:24] <KoRnouille> gstreamermodule.c:28:23: pygobject.h: No such file or directory
[14:24] <KoRnouille> gstreamermodule.c:29:21: gst/gst.h: No such file or directory
[14:24] <KoRnouille> that's when I make gst-python CVS
[14:25] <thaytan> have you got the right PKG_CONFIG_PATH set to pick up the .pc files for those?
[14:25] <KoRnouille> yes
[14:25] <KoRnouille> but I don't know if I have the .pc files
[14:25] <KoRnouille> compiled from source
[14:25] <thaytan> then you should have them in $PREFIX/lib/pkgconfig
[14:25] <KoRnouille> source generates .pc files ?
[14:26] <KoRnouille> I do have pygtk-2.0.pc here...
[14:26] <KoRnouille> and gstreamer-0.7.pc also
[14:27] <KoRnouille> in fact I got only gst stuff in here
[14:27] <thaytan> check that the failing build command line includes the right directories....
[14:27] <KoRnouille> argh
[14:28] <KoRnouille> I have 2 directories containing .pc files
[14:28] <KoRnouille> /usr/local/lib/pkgconfig/ and /usr/lib/pkgconfig/
[14:28] <KoRnouille> and I got only gstreamer stuff in /usr/local/lib/pkgconfig/
[14:29] <KoRnouille> I guess gstreamer created this here.
[14:29] <thaytan> yes, it did
[14:29] <thaytan> so you need echo $PKG_CONFIG_PATH to say /usr/local/lib/pkgconfig
[14:29] <KoRnouille> I should uninstall gstreamer ? and reinstall that in the right place ?
[14:30] <thaytan> it'll work from any place if you set the environment up right
[14:30] <thaytan> I install everything in /storage2/gnome2, for example
[14:30] <KoRnouille> argh
[14:31] <KoRnouille> but when I ./configure with the other pkgcongif folder it complains about not finding gstreamer
[14:31] <KoRnouille> :/
[14:31] <thaytan> what do you mean?
[14:32] <KoRnouille> i've now set PKG_CONFIG_PATH=/usr/lib/pkgconfig
[14:32] <KoRnouille> (I had PKG_CONFIG_PATH=/usr/local/lib/pkgconfig before that only contains the gstreamer .pc files)
[14:32] <thaytan> /usr/lib/pkgconfig is always used
[14:32] <thaytan> you need to specify the non-standard /usr/local/lib/pkgconfig 
[14:32] <KoRnouille> not in my case apparently
[14:33] <thaytan> where did the pygtk .pc files go to?
[14:33] <KoRnouille> lol : ./confiture won't work
[14:33] <KoRnouille> (means marmelade in french)
[14:34] <KoRnouille> when I specify /usr/local/lib/pkgconfig, it will ./configure right... but I get these errors
[14:34] <KoRnouille> gstreamermodule.c:28:23: pygobject.h: No such file or directory
[14:34] <KoRnouille> gstreamermodule.c:29:21: gst/gst.h: No such file or directory
[14:34] <KoRnouille> I don't have a gst/gst.h folder here...
[14:34] <KoRnouille> in the gst-python that CVS crated for me
[14:34] <thaytan> no, it's in /usr/local/include/gstreamer-0.7
[14:35] <thaytan> which the pkgconfig file should be supplying to the build
[14:35] <KoRnouille> right
[14:35] <KoRnouille> well, my pkgconfig is screwed up I guess
[14:35] <thaytan> or it isn't being used correctly
[14:35] <KoRnouille> for some reason gstreamer installed it self in /usr/local/lib/pkgconfig
[14:36] <thaytan> take a look at it, and check the gcc command that is failing looking for -I /usr/local/lib/gstreamer-0.7
[14:36] <KoRnouille> all the rest is used in /usr/lib/pkgconfig
[14:36] <thaytan> /usr/local is the default prefix if you don't supply one to a ./configure command
[14:36] alley_cat ([email protected]) left irc: "May the Source be with you!"
[14:36] <KoRnouille> aaah, I didn't specify anything to gstreamer when I installed it
[14:37] <KoRnouille> but I never specify for any programs
[14:38] <thaytan> then I'd expect more stuff to be installed in /usr/local :)
[14:41] Action: KoRnouille is reinstalling everything
[14:41] <KoRnouille> from gstreamer
[14:41] <thaytan> ouch
[14:42] <KoRnouille> :/
[14:46] <KoRnouille> when I do the ./configure, does it says somewhere where it's going to install the stuff ?
[14:47] <thaytan> ./configure --help should tell you the default
[14:47] <thaytan> or if you do ./configure --prefix=/usr/blah then you'll know too
[14:50] Action: KoRnouille is now doing ./configure --with-pkg-config-path=/usr/lib/pkgconfig
[14:51] Action: KoRnouille crosses his fingers at the same time
[14:52] <thaytan> KoRnouille: pkgconfig always looks in /usr/lib/pkgconfig no matter what... 
[14:52] <KoRnouille> yeah ?
[14:52] <thaytan> yep, even if you give it another path using PKG_CONFIG_PATH, it looks in /usr/lib/pkgconfig for files too
[14:52] Nick change: kh_out -> khalek
[14:53] <KoRnouille> well, just before that, I did a standard ./configure ; make ; make install, and it created that /usr/local/lib/pkgconfig dir again (I unset my old PKG_CONFIG_PATH also)
[14:54] <KoRnouille> damnit
[14:54] <KoRnouille> same place again
[14:54] <thaytan> you need to give --prefix= and install the whole package elsewhere, or it will go into /usr/local
[14:55] <KoRnouille> i don't care where it actually installs it. I just want these .pc files from /usr/local/lib/pkgconfig to be installed to /usr/lib/pkgconfig
[14:56] <KoRnouille> --libdir=DIR           object code libraries [EPREFIX/lib] ???
[14:56] <KoRnouille> I also have Optional Packages:
[14:56] <KoRnouille>   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
[14:57] <thaytan> then you'll have to install all gstreamer in /usr/ or manually copy the files afterward
[14:58] <thaytan> the better way is to set PKG_CONFIG_PATH to /usr/local/lib/pkgconfig like you were and put things in /usr/local
[14:58] <thaytan> rather than risking clobbering files your distribution has installed in /usr/
[14:59] <KoRnouille> im not familiar with install processes
[14:59] <thaytan> you're getting familiar now :)
[15:00] <KoRnouille> but if I copy these .pc files manually, I'll break something because it will be looking for gstreamer.pc in /usr/local/lib/pkgconfig and not /usr/lib/pkgconfig, right ?
[15:00] Action: KoRnouille is trying ./configure --libdir=/usr/lib/
[15:01] <KoRnouille> can we write plugins for gstreamer in python ?
[15:01] Action: teuf wonders which mess KoRnouille is wreaking on his system
[15:01] <KoRnouille> I'd like to write a plugin (when i'll be a better programmer) for using the TV out of dvb cards
[15:02] <KoRnouille> I guess the mess is RH
[15:02] <KoRnouille> or gstreamer is not installing it self the same way all the other program do.
[15:03] <KoRnouille> Yes !!!!!!!!!
[15:03] <KoRnouille> ./configure --libdir=/usr/lib/ made the trick
[15:03] <teuf> since you are the only one to have these issues, I'd suspect your system ;)
[15:03] <KoRnouille> :D
[15:03] <teuf> KoRnouille: that's one of the worse thing to do on a distro
[15:03] <KoRnouille> probably teuf
[15:04] <KoRnouille> what is the worse thing to do ?
[15:04] <KoRnouille> --libdir= ?
[15:04] <teuf> installing stuff you compiled yourself in /usr
[15:05] <KoRnouille> only the libs
[15:05] <teuf> libs count as "stuff"
[15:05] <KoRnouille> (I think)
[15:06] <KoRnouille> well, why do I have mad.h in here ? why do I have all these .pc files for programs I compiled my self in /usr/lib/pkgconfig
[15:07] <teuf> KoRnouille: I have absolutely no idea what you did with your system...
[15:07] <teuf> by default stuff compiled from source get installed in /usr/local
[15:07] <KoRnouille> well, really, I don't play around with my system because I just don't know what to play around with... i'm new to linux
[15:08] <KoRnouille> ls -1 /usr/lib/pkgconfig/
[15:08] <KoRnouille> I have stuff like this id3tag.pc
[15:08] <teuf> maybe it got installed by an rpm
[15:09] <KoRnouille> ...
[15:09] <KoRnouille> right.
[15:09] <KoRnouille> rpm install everything here ?
[15:09] <KoRnouille> /usr/lib ?
[15:09] <KoRnouille> i did some apt-get install bla
[15:09] <teuf> everything under /usr except /usr/local is 'owned' by rpm
[15:09] <teuf> and you should let it manage it
[15:10] <KoRnouille> aaah
[15:10] <KoRnouille> okay, let me check what I have compiled my self (with my own hands)
[15:11] <KoRnouille> mplayer
[15:11] <KoRnouille> is in /usr/local/
[15:11] <KoRnouille> but no .pc files around
[15:11] <teuf> apps don't necessarily install .pc files...
[15:12] <teuf> mplayer does not, since it's not a lib, there's no point for it to have a .pc file
[15:12] <KoRnouille> well, actually, this it the 1st time I deal with a program that asks my to look for .pc files
[15:12] <KoRnouille> find /usr/local/ -iname *.pc
[15:13] <KoRnouille> I only have stuff in /usr/local/src (where I make my programs from src)
[15:13] <teuf> .pc files are in $prefix/lib/pkgconfig
[15:13] <KoRnouille> well, it's empty
[15:13] <teuf> maybe because you didn't install anything which had a .pc file :)
[15:14] <KoRnouille> (did it even exist before gstreamer ?)
[15:14] <KoRnouille> well, i think that strange
[15:14] <KoRnouille> I have been installing many codecs manually
[15:16] <KoRnouille> I never had to do that PKG_CONFIG_PATH before
[15:16] thaytan ([email protected]) left irc: Read error: 113 (No route to host)
[15:17] <teuf> you need to do that when yo install a .pc file in a prefix different from pkgconfig prefix
[15:17] <KoRnouille> ok
[15:17] <KoRnouille> so I guess my install process was okay, then
[15:18] <KoRnouille> but why gst-python complained when compiling ?
[15:18] <teuf> what did it asy ?
[15:18] <KoRnouille> I had PKG_CONFIG_PATH set to /usr/local/lib/pkgconfig
[15:19] <KoRnouille> and it complained about not finding gst/gst.h
[15:19] <KoRnouille> and pygobject.h
[15:20] <teuf> it would have been worth having a look at config.log and at the gcc command lines used
[15:20] Action: KoRnouille is reinstalling every back like it was
[15:21] jcsston ([email protected]) joined #gstreamer.
[15:21] <KoRnouille> okay, give me 1 or 2 minutes, I'm compiling
[15:21] <KoRnouille> I'll show you the error
[15:23] casaxno ([email protected]) left irc: 
[15:23] <KoRnouille> ill just ./configure ; make ; make install for everything without specifying any path
[15:24] <KoRnouille> installing ./configuring gst-plugins
[15:24] <KoRnouille> okay, now it complains about not finding gstreamer.pc
[15:25] <teuf> exoprt PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
[15:25] <KoRnouille> export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
[15:25] <KoRnouille> right
[15:25] <KoRnouille> okay, now it's get's through
[15:26] Rotty ([email protected]) left irc: Remote closed the connection
[15:26] <KoRnouille> any idea why I have : checking for xvid_global in -lxvidcore... no
[15:26] Rotty ([email protected]) joined #gstreamer.
[15:26] <KoRnouille> everything else is yes, but this line has a no, and it won't install this plugin
[15:26] <teuf> maybe you don't have xvidcore installed
[15:26] <KoRnouille> xvid was compiled and installed manually
[15:27] <teuf> you may need to tell it where to find it then
[15:27] <KoRnouille> xvidcore-1.0.0-rc2
[15:28] thaytan ([email protected]) joined #gstreamer.
[15:29] <KoRnouille> teuf: make install
[15:29] <KoRnouille>   D: /usr/local/lib
[15:29] <KoRnouille>   I: /usr/local/lib/libxvidcore.so.4.0
[15:29] <KoRnouille>   I: /usr/local/lib/libxvidcore.a
[15:29] <KoRnouille>   D: /usr/local/include
[15:29] <KoRnouille>   I: /usr/local/include/xvid.h
[15:29] <teuf> KoRnouille: I don't carea bout xvid, that's not breaking compilation
[15:30] <KoRnouille> i know
[15:30] <KoRnouille> it was just to know if everything was right
[15:30] <KoRnouille> nevermind
[15:30] <KoRnouille> ill figure that out later
[15:31] <thaytan> sorry, machine crashed
[15:31] <thaytan> and corrupted the hard drive :-/
[15:31] casaxno ([email protected]) joined #gstreamer.
[15:32] <KoRnouille> what do I need to have mpeg2enc ?
[15:32] <KoRnouille> transcode ? or mjpegtools ?
[15:32] ChrisHJW ([email protected]) left irc: Connection timed out
[15:32] <thaytan> mjpegtools
[15:33] Action: KoRnouille seems to have mjpegtools
[15:33] <thaytan> libmjpegtools-dev ?
[15:33] <KoRnouille> rpm -qa | grep mjpeg
[15:33] <KoRnouille> mjpegtools-devel-1.6.1.93-1
[15:33] <KoRnouille> mjpegtools-1.6.1.93-1
[15:35] <thaytan> should be working then AFAIK
[15:36] <KoRnouille> :/
[15:39] <KoRnouille> checking for valid mpeg2enc object... no
[15:39] <KoRnouille> all the rest is yes
[15:42] Nick change: khalek -> kh_zZz
[15:50] <KoRnouille> oaky
[15:50] <KoRnouille> here we go again
[15:50] <KoRnouille> with gst-python
[15:51] <KoRnouille> /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/python2.3     -fno-strict-aliasing -g -O2 -Wall -std=c9x -c -o _gstreamermodule_la-gstreamermodule.lo `test -f 'gstreamermodule.c' || echo './'`gstreamermodule.c
[15:51] <KoRnouille> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/python2.3 -fno-strict-aliasing -g -O2 -Wall -std=c9x -c gstreamermodule.c -MT _gstreamermodule_la-gstreamermodule.lo -MD -MP -MF .deps/_gstreamermodule_la-gstreamermodule.TPlo  -fPIC -DPIC -o _gstreamermodule_la-gstreamermodule.lo
[15:51] <KoRnouille> gstreamermodule.c:28:23: pygobject.h: No such file or directory
[15:51] <KoRnouille> gstreamermodule.c:29:21: gst/gst.h: No such file or directory
[15:51] <teuf> for some reason, it didn't put the cflags necessary for gstreamer and pygtk
[15:52] jcsston ([email protected]) left irc: Read error: 110 (Connection timed out)
[15:52] <KoRnouille> hummm
[15:52] <KoRnouille> when i make in pygtk I get a few errors, but I go all the way trough
[15:54] thaytan ([email protected]) left irc: Read error: 113 (No route to host)
[15:56] <KoRnouille> I get errors like Could not write method GtkTextIter.forward_find_char: No ArgType for 'GtkTextCharPredicate'
[15:57] thaytan ([email protected]) joined #gstreamer.
[15:57] <KoRnouille> teuf: so the problem would come from the gst-python ./configure script ?
[15:58] <teuf> KoRnouille: something like that. config.log may tell you more
[16:02] <KoRnouille> looks good
[16:09] <KoRnouille> darn, I can't figure out
[16:12] markey ([email protected]) joined #gstreamer.
[16:13] <KoRnouille> thaytan: you have compiled gst-python succesfully, right ?
[16:14] thaytan ([email protected]) left irc: Remote closed the connection
[16:21] <KoRnouille> checking GST_CFLAGS... -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pthread -I/usr/local/include/gstreamer-0.7 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
[16:21] <KoRnouille> checking GST_LIBS... -Wl,--export-dynamic -pthread -L/usr/local/lib -lgstreamer-0.7 -lgobject-2.0 -lgmodule-2.0 -ldl -lgthread-2.0 -lxml2 -lz -lm -lglib-2.0
[16:21] <KoRnouille> checking PYGTK_CFLAGS... -I/usr/local/include/pygtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
[16:21] <KoRnouille> checking PYGTK_LIBS... -lgobject-2.0 -lglib-2.0
[16:21] <KoRnouille> is something looking wrong in here ?
[16:23] <bilboed> hmm... I don't get it. I've got libgstvideobalance.["la""so"] in /usr/local/lib/gstreamer-0.7 and gst-inspect-0.7 can't find videobalance....
[16:26] <bilboed> what is the purpose of videobalance ?
[16:27] <bilboed> modifying rgb/yuv/brightness/saturation/hue/... ?
[16:27] <KoRnouille> I dunno
[16:45] <teuf> bilboed: did you rerun gst-register-0.7 ? is videobalance installed in the same prefix as the other plugins ?
[16:45] markey ([email protected]) left irc: "bbl"
[16:46] <bilboed> teuf: I'm trying it again
[16:47] <bilboed> nope, videobalance is definitely not detected
[16:52] <bilboed> INFO  ^[[00;01;36mGST_PLUGIN_LOADING^[[00m(^[[335m15322^[[00m) ^[[00;01;36mgstplugin.c(190):gst_plugin_register_func: NULL^[[00m plugin "/usr/local/lib/gstreamer-0.7/libgstvideobalan\
[16:52] <bilboed> ce.so" has invalid license "eamer", not loading
[16:52] AlexCONRAD ([email protected]) joined #gstreamer.
[16:53] KoRnouille ([email protected]) left irc: Client Quit
[16:53] <bilboed> I'm checking that out
[16:56] sxpert ([email protected]) joined #gstreamer.
[16:57] <apoc> sxpert : are your at fosdem ? ;)
[16:59] <bilboed> in fact I have the same problem for plugins videobalance, volume, xvideosink xvimagesink video4linux and ossaudio
[17:00] <AlexCONRAD> damn, I can't see my gst-python compilation problem
[17:01] what_the_blah ([email protected]) joined #gstreamer.
[17:01] markey ([email protected]) joined #gstreamer.
[17:01] <what_the_blah> where can I bug people about (probably) known build errors?
[17:03] <AlexCONRAD> after I check out the cvs (cvs -z3 -d:pserver:[email protected]:/cvs/gstreamer co gst-python), do I have anything else to do ?
[17:04] <what_the_blah> has anyone had problems with gstreamer-0.7.4/gst/parse/grammar.y ??? or is it just me? yeah, I've got bison/flex...
[17:04] sublett ([email protected]) joined #gstreamer.
[17:04] <what_the_blah> AlexCONRAD: you should have it being downloaded... after that finishes, use ./autogen
[17:05] <AlexCONRAD> that's what I did
[17:05] <AlexCONRAD> but I get that build problem
[17:05] <AlexCONRAD> gstreamermodule.c:28:23: pygobject.h: No such file or directory
[17:05] <AlexCONRAD> gstreamermodule.c:29:21: gst/gst.h: No such file or directory
[17:05] <AlexCONRAD> and I can't see what's going on
[17:05] Misirlou ([email protected]) joined #gstreamer.
[17:05] <what_the_blah> have you got the pygtk stuff? I guess that's required...
[17:06] <AlexCONRAD> yes I do.
[17:06] <AlexCONRAD> ./autogen.sh has found it
[17:06] <sxpert> apoc: yeah. hacker room, row 2, seat next to wall opposite to entrance
[17:06] <what_the_blah> the pygtk-devel aswell ?
[17:06] <AlexCONRAD> i compiled pygtk from source
[17:06] <what_the_blah> cruel...
[17:06] <AlexCONRAD> I guess there's everything here...
[17:07] <what_the_blah> I'm having trouble myself with gstreamer-0.7.4, so, won't be able to help you out here...
[17:07] <what_the_blah> people! lift up your voices! help us out ;-)
[17:08] <AlexCONRAD> what_the_blah: do you have gst-python installed ,
[17:08] <what_the_blah> AlexCONRAD: nope
[17:08] <AlexCONRAD> hummm, okay, I won't bother you
[17:08] <AlexCONRAD> but I'm pretty sure something's wrong with the install process
[17:09] <what_the_blah> wouldn't mind helping if I had it installed...
[17:09] <AlexCONRAD> but im' not good at this stuff
[17:09] ChrisHJW ([email protected]) joined #gstreamer.
[17:09] <what_the_blah> check if the ./configure script takes options regarding the location of pygtk
[17:09] <what_the_blah> try ./configure --help and check it out...
[17:10] <AlexCONRAD> no, ./configure --help only shows generic stuff
[17:11] <AlexCONRAD> would you mind trying ? it's very small and very fast to download / build
[17:11] <AlexCONRAD> cvs -z3 -d:pserver:[email protected]:/cvs/gstreamer co gst-python
[17:11] <what_the_blah> hang on
[17:11] <AlexCONRAD> thank you what_the_blah
[17:12] <what_the_blah> (I *really* should change my nick...)
[17:12] <what_the_blah> ;-)
[17:12] <AlexCONRAD> ;)
[17:14] alley_cat ([email protected]) joined #gstreamer.
[17:16] <what_the_blah> AlexCONRAD: what system are you on?
[17:16] <AlexCONRAD> RH 9
[17:16] <what_the_blah> ok... hang on
[17:18] <what_the_blah> and what gstreamer major version? 0.6 or 0.7 ???
[17:19] sxpert ([email protected]) left irc: "Client exiting"
[17:19] <AlexCONRAD> 0.7
[17:19] sxpert ([email protected]) joined #gstreamer.
[17:21] <what_the_blah> AlexCONRAD: man... mine won't even finish ./configure... it complains about a gstreamer-interfaces package config file, which doesn't even exist on 0.7.4! I'm puzzled...
[17:22] <AlexCONRAD> mine's okay
[17:22] <AlexCONRAD> checking for GStreamer interfaces include dir... checking for gstreamer-interfaces-0.7... yes
[17:22] <AlexCONRAD> checking GST_INTERFACES_CFLAGS... -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pthread -I/usr/local/include/gstreamer-0.7 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
[17:22] <AlexCONRAD> checking GST_INTERFACES_LIBS... -Wl,--export-dynamic -pthread -L/usr/local/lib -lgstinterfaces-0.7 -lgstreamer-0.7 -lgobject-2.0 -lgmodule-2.0 -ldl -lgthread-2.0 -lxml2 -lz -lm -lglib-2.0
[17:22] <AlexCONRAD> your PKG_CONFIG_PATH is set ?
[17:22] <what_the_blah> yep
[17:23] <what_the_blah> what version have you got? 0.7.x ?
[17:23] <AlexCONRAD> .4
[17:23] <what_the_blah> what_the_blah!!!! ;)
[17:23] <AlexCONRAD> lol
[17:24] <what_the_blah> could you check where this file comes from? rpm -qf /usr/lib/pkgconfig/gstreamer-interfaces*.pc ???
[17:24] <AlexCONRAD> sure
[17:24] <AlexCONRAD> error: file /usr/lib/pkgconfig/gstreamer-interfaces*.pc: No such file or directory
[17:25] <AlexCONRAD> sorry
[17:25] <AlexCONRAD> file /usr/local/lib/pkgconfig/gstreamer-interfaces-0.7.pc is not owned by any package
[17:25] <AlexCONRAD> you have the plugins built ?
[17:26] <what_the_blah> yep
[17:26] <teuf> what_the_blah: I have it in my gst-plugins source tree
[17:26] <what_the_blah> let me check it this file is on gst-plugins-devel...
[17:26] Action: AlexCONRAD built gstreamer from src
[17:26] <what_the_blah> yep!
[17:27] Action: what_the_blah is a RPM/APT freak...
[17:27] Action: what_the_blah doens't install *-devels
[17:27] <what_the_blah> got it know
[17:28] <what_the_blah> got it now
[17:28] <AlexCONRAD> :)
[17:31] <AlexCONRAD> so does it build ?
[17:33] <what_the_blah> AlexCONRAD: check is this fixes you problem: open src/gst-python/gstreamer/Makefile
[17:33] <AlexCONRAD> ok
[17:34] <what_the_blah> AlexCONRAD: look for "INCLUDES = $(PYTHON_INCLUDES) $(PYGTK_CFLAGS)"
[17:34] <what_the_blah> AlexCONRAD: and change it to "INCLUDES = $(PYTHON_INCLUDES) $(PYGTK_CFLAGS) $(GST_INTERFACES_CFLAGS)"
[17:34] <AlexCONRAD> found it
[17:34] <AlexCONRAD> ok
[17:34] <AlexCONRAD> gstreamermodule.c:28:23: pygobject.h: No such file or directory
[17:34] <AlexCONRAD> gstreamermodule.c:29:21: gst/gst.h: No such file or directory
[17:35] <what_the_blah> ok, it's more serious than I though ;-)
[17:35] <AlexCONRAD> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/python2.3 -fno-strict-aliasing -g -O2 -Wall -std=c9x -c gstreamermodule.c -MT _gstreamermodule_la-gstreamermodule.lo -MD -MP -MF .deps/_gstreamermodule_la-gstreamermodule.TPlo  -fPIC -DPIC -o _gstreamermodule_la-gstreamermodule.lo
[17:35] <what_the_blah> get rif of the $(GST_INTERFACES_CFLAGS)
[17:35] <what_the_blah> and put a -I/usr/local/include/gstreamer-0.7
[17:36] <AlexCONRAD> i replace $(GST_INTERFACES_CFLAGS) with -I/usr/local/include/gstreamer-0.7 ??
[17:36] <what_the_blah> yes
[17:37] <what_the_blah> is you gstreamer install in /usr/local ?
[17:37] <AlexCONRAD> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/python2.3 -I/usr/local/include/gstreamer-0.7 -fno-strict-aliasing -g -O2 -Wall -std=c9x -c gstreamermodule.c -MT _gstreamermodule_la-gstreamermodule.lo -MD -MP -MF .deps/_gstreamermodule_la-gstreamermodule.TPlo  -fPIC -DPIC -o _gstreamermodule_la-gstreamermodule.lo
[17:37] <AlexCONRAD> gstreamermodule.c:28:23: pygobject.h: No such file or directory
[17:37] <AlexCONRAD> In file included from gstreamermodule.c:29:
[17:37] <AlexCONRAD> /usr/local/include/gstreamer-0.7/gst/gst.h:27:18: glib.h: No such file or directory
[17:37] <AlexCONRAD> :/
[17:39] <what_the_blah> have you got glib2-devel ?
[17:39] <AlexCONRAD> i think
[17:39] <AlexCONRAD> rpm -qa | grep -i glib -> glib2-devel-2.2.1-1
[17:40] <what_the_blah> man... I really need to go now... hope my help was anyhow useful...
[17:40] <what_the_blah> see you around
[17:40] <AlexCONRAD> okay, thanks anyway
[17:40] what_the_blah ([email protected]) left irc: "Client exiting"
[17:40] <AlexCONRAD> (btw, did you compile ?)
[17:40] <AlexCONRAD> aah
[17:41] <AlexCONRAD> im going for a hair cut
[17:41] <AlexCONRAD> :)
[17:41] Action: AlexCONRAD is gone for an hour or so...
[18:17] jaiserca ([email protected]) joined #gstreamer.
[18:17] casaxno ([email protected]) left irc: Read error: 104 (Connection reset by peer)
[18:18] jaiserca ([email protected]) left irc: Client Quit
[18:18] jaiserca ([email protected]) joined #gstreamer.
[18:21] sxpert ([email protected]) left irc: Read error: 113 (No route to host)
[18:27] <bilboed> I have got problems with the following plugins videobalance, volume, xvideosink xvimagesink video4linux and ossaudio . I get the following error with gst-inspect : "/usr/local/lib/gstreamer-0.7/libgstxvideosink.so" has invalid license "amer.net", not loading
[18:28] <bilboed> with gst-plugins 0.7.4
[18:32] emzed ([email protected]) joined #gstreamer.
[18:32] <emzed> hi ppl
[18:33] <teuf> lut emzed
[18:33] <emzed> chan français ?
[18:34] <teuf> non :)
[18:34] <bilboed> mais ca veut pas dire qu'il n'y en a pas
[18:35] <emzed> ok lol :D
[18:35] <emzed> gstreamer is going to kill my computer !
[18:36] <emzed> je parle anglais quand même, ça fait plus poli :)
[18:37] <emzed> I try to play sound file with juk over gstreamer, or gstreamer-player, and it doesn't work at all
[18:37] <emzed> it slows down my computer (a lot)
[18:37] <emzed> no sound out
[18:37] <emzed> so, is it a know problem ?
[18:37] <emzed> can I play mp3 with gstreamer-player ?
[18:38] <teuf> gst-launch-ext should be able to play mp3s
[18:38] <emzed> ok, i try
[18:38] <teuf> what gstreamer version are you using ?
[18:39] <emzed> 0.6.4
[18:39] <emzed> one time again, that doesn't work :/
[18:39] <emzed> and it slows down a lot my computer
[18:39] <teuf> are you using osssink for the ouput ?
[18:39] <emzed> with no error message
[18:40] <emzed> I don't know ... I installed all output and i don't specify which one to use
[18:40] <emzed> I thought it was took automatically
[18:40] <emzed> I would like to use alsa
[18:40] <teuf> try gstreamer-properties
[18:40] <emzed> ok
[18:40] <teuf> no you don't
[18:40] <teuf> you want to use osssink
[18:40] <teuf> since that is the only one which works well with gstreamer 0.6 ;)
[18:40] <emzed> ah ?
[18:41] <emzed> ok
[18:41] <emzed> it will use correctly oss emulation ?
[18:41] <teuf> yup
[18:41] <emzed> great :)
[18:41] <emzed> I don't find gstreamer-properties ...
[18:41] <emzed> I use all debian packages
[18:42] <emzed> I installed all of them
[18:43] <emzed> maybe gst-register ?
[18:44] <teuf> try gst-launch filesrc location="somefile.mp3" ! mad ! osssink
[18:44] <emzed> k
[18:46] <emzed> the same ...
[18:46] <emzed> I don't get any message too
[18:46] <emzed> at least no error message
[18:46] <emzed> I get only :
[18:46] <emzed> GStreamer-INFO: 0 live buffer(s)
[18:46] <emzed> GStreamer-INFO: 0 live bufferpool(s)
[18:46] <emzed> GStreamer-INFO: 0 live event(s)
[18:46] <emzed> RUNNING pipeline
[18:47] <teuf> maybe something is already using /Dev/dsp ?
[18:48] <emzed> teuf: no
[18:48] <emzed> since my sound card can't play several sound at the same time
[18:48] <emzed> and fuser /dev/dsp tell me nothing :)
[18:49] <teuf> can or can't ?
[18:49] <emzed> can't
[18:49] <teuf> emzed: even as root ?
[18:49] <emzed> what as root ? playing with gstreamer ?
[18:49] <teuf> fuser
[18:49] <emzed> hmm, heh :)
[18:50] <emzed> no, nothing
[18:50] <emzed> even as root
[18:50] <apoc> emzed : is esd running ?
[18:50] <emzed> no
[18:50] <emzed> I used arts before
[18:50] <emzed> but I disabled it too
[18:50] <apoc> so you get no sound with teuf's command line ?
[18:52] <emzed> apoc: no sound, no message, system slow down
[18:52] <emzed> :/
[18:53] <apoc> if you have alsa replace osssink by alsasink
[18:54] <emzed> ok
[18:54] <emzed> erf ...
[18:55] <emzed> ** (process:4035): WARNING **: error setting period in frames (8192): Invalid argument
[18:55] <emzed> pipeline doesn't want to play
[18:55] <apoc> glups
[18:56] <emzed> maybe alsa is buggy here ...
[18:56] <emzed> I use last version
[18:56] <emzed> 1.0.2c
[18:56] <emzed> in kernel 2.6
[18:56] <teuf> I think the gstreamer alsa element hardly worked in gst 0.6
[18:56] <emzed> is gstremer known to be kernel 2.6 aware ?
[18:56] <apoc> oh yes that's right
[18:58] <emzed> what is right ,
[18:58] <emzed> ?
[18:58] <emzed> that alsa doesn't work ?
[18:59] <bilboed> I have got problems with the following gst-plugins (0.7.4) : videobalance, volume, xvideosink xvimagesink video4linux and ossaudio . I get the following error with gst-inspect : "/usr/local/lib/gstreamer-0.7/libgstxvideosink.so" has invalid license "amer.net", not loading
[18:59] <apoc> alsa doesn't work well with 0.6.x
[19:00] <emzed> k
[19:00] <emzed> 0.7 is the last version ?
[19:01] <emzed> it works better ?
[19:01] <apoc> yep
[19:01] Last message repeated 1 time(s).
[19:01] <apoc> :)
[19:01] <emzed> :)
[19:01] <emzed> mmm
[19:01] <emzed> maybe I should try it ..
[19:02] <apoc> you can have 0.6.x and 0.7.x installed 
[19:02] <emzed> k
[19:02] <emzed> the biggest pb is ...
[19:02] <emzed> how to install it :)
[19:03] <emzed> since I want to use only debian package
[19:03] <emzed> :)
[19:12] sublett ([email protected]) left irc: "I like food, food is good!"
[19:24] smoke ([email protected]) joined #gstreamer.
[19:25] taaz ([email protected]) left irc: Read error: 110 (Connection timed out)
[19:34] BBB ([email protected]) joined #gstreamer.
[19:34] <apoc> hey BBB
[19:35] <BBB> hi
[19:35] Action: BBB feels so depressed without a laptop
[19:36] Action: apoc has no laptop :(
[19:36] <BBB> I have no computer at all
[19:37] <apoc> and you can live without a computer ?? :)
[19:37] <aldug> anyone know if this is a nautilus-media bug or a gstreamer bug?
[19:37] <aldug> http://128.113.144.72/~aldug/nautilus-media-crash.txt
[19:38] <aldug> It happens when I right click on a mp3 file using nautilus
[19:38] <BBB> apoc: no :P
[19:38] <BBB> nautilus-media...
[19:38] <aldug> BBB: you're sure?
[19:39] <BBB> no
[19:39] <aldug> what does that line with gstcaps.c mean?
[19:39] <BBB> but it's a quick guess
[19:39] <BBB> nautilus-media is probably not using caps rightly... not sure
[19:42] Action: BBB wants to fix bugs
[19:42] <BBB> gnome-2.6 is so close
[19:42] <BBB> and we have so many bugs
[19:42] <BBB> and I can't even check if it compiles
[19:42] <BBB> grmbl
[19:42] <BBB> did anyone test gnome-media (mixer/sound-recorder) lately?
[19:46] <apoc> BBB : I still have the mixer window too small
[19:47] emzed ([email protected]) left irc: Remote closed the connection
[19:48] <BBB> I thought I fixed that in latest CVS
[19:48] <BBB> maybe they removed it because it was past UI freeze
[19:48] Action: BBB isn't good at freezes
[19:49] <BBB> or maybe it's something different
[19:49] foser ([email protected]) joined #gstreamer.
[19:49] <BBB> I'll look at it as soon as I've got my laptop back working
[19:52] Action: BBB leaves
[19:52] BBB ([email protected]) left #gstreamer.
[20:08] ramon ([email protected]) joined #gstreamer.
[20:09] <ramon> Hola hola
[20:11] Last message repeated 1 time(s).
[20:11] sublett ([email protected]) joined #gstreamer.
[20:11] <ramon> hola hola
[20:15] foser_ ([email protected]) joined #gstreamer.
[20:15] foser_ ([email protected]) left irc: Client Quit
[20:23] jcsston ([email protected]) joined #gstreamer.
[20:24] kwm ([email protected]) left irc: Read error: 54 (Connection reset by peer)
[20:26] kwm ([email protected]) joined #gstreamer.
[20:29] <ramon> Hi
[21:13] <mxpxpod> does anyone here use totem to play dvd's with gstreamer?
[21:19] <ramon> Apart from reading that there are DVD improvements in the CVS version of GStreamer, I know nothing about this subject.
[21:23] apoc ([email protected]) left irc: Connection timed out
[22:08] ramon ([email protected]) left irc: "Terminando cliente"
[22:14] <bilboed> I have got problems with using the following gst-plugins (0.7.4) : videobalance, volume, xvideosink xvimagesink video4linux and ossaudio . I get the following error with gst-inspect : "/usr/local/lib/gstreamer-0.7/libgstxvideosink.so" has invalid license "amer.net", not loading
[22:16] wheels ([email protected]) left irc: Read error: 113 (No route to host)
[22:24] <bilboed> is there a way, with wget, to get all the links of a given url ?
[22:24] <bilboed> .i.e the urls (not the content at those urls)
[22:33] mathrick ([email protected]) joined #gstreamer.
[22:34] <alley_cat> wget <url> | sed 's/href=\(.*\)>/\1/'
[22:35] <alley_cat> not a full solution, but should get close for many pages
[22:36] <mathrick> re
[22:36] <bitshifter> wget --recursive --level=2 <url>
[22:36] <bitshifter> sorry, misread
[22:36] <bitshifter> ignore me
[22:36] <alley_cat> err, wget -O /dev/stdout ...
[22:42] Zeenix ([email protected]) joined #gstreamer.
[22:43] <bilboed> thx
[22:44] <Zeenix> hi
[22:50] <mathrick> lo Zeenix
[23:00] <mxpxpod> mathrick: do you use totem?
[23:03] <mathrick> mxpxpod: occasionally, for testing purposes rather, although now it's getting into shape i'll probably start using it more often
[23:03] <mxpxpod> I can't get it to play dvd's
[23:03] <mxpxpod> using the gstreamer backend
[23:04] <mathrick> mxpxpod: ah, no, with dvd's i'm of no help, don't own one
[23:04] <mxpxpod> ok
[23:04] <mxpxpod> oh well
[23:04] <mxpxpod> I'll use the old standby
[23:16] sublett ([email protected]) left irc: "I like food, food is good!"
[23:26] markey ([email protected]) left irc: "nite"
[23:51] taaz ([email protected]) joined #gstreamer.
[23:54] harshy ([email protected]) left irc: "I quit for now"
[23:57] kwm ([email protected]) left irc: "Leaving"
[23:58] Action: mathrick is really sleepy
[23:58] <mathrick> nite
[23:59] Nick change: mathrick -> mathrick|sleep
[00:00] --- Sun Feb 22 2004
[00:06] wheels ([email protected]) joined #gstreamer.
[00:11] thaytan ([email protected]) joined #gstreamer.
[00:14] sublett ([email protected]) joined #gstreamer.
[00:16] jcsston` ([email protected]) joined #gstreamer.
[00:19] Nick change: kh_zZz -> khalek
[00:35] jcsston ([email protected]) left irc: Read error: 110 (Connection timed out)
[00:42] Nick change: jcsston` -> jcsston
[00:59] teuf ([email protected]) left irc: "Client exiting"
[01:00] Zeenix ([email protected]) left irc: "The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser people so full of 
[01:02] foser ([email protected]) left irc: "[ I want to believe ]"
[01:10] ChrisHJW_log ([email protected]) joined #gstreamer.
[01:15] smoke ([email protected]) got netsplit.
[01:21] smoke ([email protected]) got lost in the net-split.
[01:28] thaytan ([email protected]) left irc: Read error: 60 (Operation timed out)
[01:39] Nick change: khalek -> kh_out
[01:42] ChrisHJW ([email protected]) left irc: Read error: 60 (Operation timed out)
[01:43] sublett ([email protected]) left irc: Read error: 113 (No route to host)
[01:46] Rotty ([email protected]) left irc: "Bye"
[02:36] ramon ([email protected]) joined #gstreamer.
[02:36] <ramon> Anyone here?
[02:39] ramon ([email protected]) left irc: Client Quit


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click