Re: Anyone using dvgrab successfully in opensuse 11.0/11.1?

Carl Karsten <[email protected]>
Newsgroups gmane.comp.video.kino.devel
Message-ID <[email protected]>
On Sat, May 16, 2009 at 7:03 PM, Woojin Lee <[email protected]> wrote:
> On Saturday 16 May 2009 05:22:52 pm Stefan Richter wrote:
>> Woojin Lee wrote:
>> > Thanks.  I did try two different DV camcoder w/ same result.  May be both
>> > cables are bad.  I'm gonna have to look for computers with different
>> > OS...  :=)
>>
>> One other thing which you can try is to connect the two PCs with each
>> other (if you have them in one place and have a matching cable).
>> If each of them reports two nodes then, they are good and the problem is
>> with the camcorders or the camcorders' cables.  If the PCs do not detect
>> each other, then the physical interface of one or both PCs is damaged or
>> the cable is defective.
>
> That's a great idea.  I just tried it and when I connected two PCs together
> with the same cable, this is what I got on both PCs.
>
> /sys/bus/ieee1394/devices/fw-host0/node_count:2
> /sys/bus/ieee1394/devices/fw-host0/nodes_active:2
> /sys/bus/ieee1394/devices/fw-host0/selfid_count:2
>
> which I presume means success.  So, am I safe to assume the cards and the
> cable are good then?  It's hard to believe that both DV camcoders are damaged
> though...  They both are relative new.  Is there anything else that could be
> the issue?  I'll see if I can find another DV camera.
>

I had some problems too.  No clue if it was the same problem, or
exactly what my problem was.  but I remember thinking " It's hard to
believe that both DV camcoders" till someone pointed out there are
probably some common chipsets / implementations.  I also concluded
that 99% of the people coming across the problem were able to roll
with it, like the driver/app was able to just drop some frames and
continue.

my only point is "yes, it could be both DV camcoders are damaged." but
it isn't a very strong case.

-- 
Carl K

------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables 
unlimited royalty-free distribution of the report engine 
for externally facing server and web deployment. 
http://p.sf.net/sfu/businessobjects
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.