Re: driver_fb woes (fwd) [PATCH]

On Wed, 17 Jan 2007 14:06:35 +0100, Marco Gusy wrote:

> Alle 02:50, mercoledì 17 gennaio 2007, Alex ha scritto:
> 
> 
>> Hi Guys!
>>  Any news for the Marvel G400...I've tried a lot of configuration with
>> different kernel 2.6.15 2.6.13 woth martin's patch too. But nothing the
>> tuner doesn't work!!!! Please help me...I become crazyyyyyyy
> 
> Just ket a 2.6.19 kernel, type in a console cvs -z3
> -d:pserver:[email protected]:/cvsroot/marvel co -P
> driver_fb
> and follow the README file for instructions.
> 
> 
Hi Dear,
I've followed your info! Kernel-2.6.19-vanilla + latest driver_fb But
nothing...I can't see no tuner channel... Apparently when I load the
driver, I use iv script, all seems fine. But when I try to see something
with xawtv nothing...With tvtime something better...I can scan with:
tvtime-scanner -n PAL -i 2
But when I try to see the tv tvtime ( tvtime -i 2 -n PAL -v )report:
videoinput: Cannot detect signal from tuner: Invalid argument videoinput:
Cannot detect signal from tuner: Invalid argument

while the kern.log:
Jan 19 11:02:37 mybig msp3400 2-0040: mono sound carrier: 6.501 MHz
Jan 19 11:02:37 mybig jiffies=23 retry=0 input = 2 norm 0 switch 94 & 5 =
4 int 918 
Jan 19 11:02:37 mybig jiffies=24 retry=0 input = 2 norm 0 switch
94 & 5 = 4 int 918
Jan 19 11:02:37 mybig jiffies=25 retry=0 input = 2 norm0 switch d4 & 5 = 4
 int 918
Jan 19 11:02:37 mybig mgavideo: -147 to switchsetup. 
Jan 19 11:02:37 mybig mga_v4l1 ioctl VIDIOCGPICT Jan 19 11:02:37
mybig mgacap ioctl VIDIOCSPICT bri=32768 hue=32768 col=32768 con=32768
dep=0 pal=7 
Jan 19 11:02:37 mybig mga_v4l1 ioctl VIDIOCGPICT 
Jan 19 11:02:37 mybig mgacap ioctl VIDIOCSPICT bri=32768 hue=32768
col=32768 con=32768 dep=0 pal=7
Jan 19 11:02:37 mybig mga_v4l1 ioctl VIDIOCGPICT
Jan 19 11:02:37 mybig 6 16639 c  16630 6  16640 8  16641, hs 0
Jan 19 11:02:37 mybig grab_image buf1=-1 buf2=1
Jan 19 11:02:37 mybig mgagrab_grab_image: no bufs
Jan 19 11:02:37 mybig 6 16639 c  16630 6 16640 8  16641, hs      0
Jan 19 11:02:37 mybig grab_image buf1=-1 buf2=1 
Jan 19 11:02:38 mybig mga_v4l1 ioctl VIDIOCMCAPTURE frame=0 geom=720x576
fmt=7 
Jan 19 11:02:38 mybig mga_v4l1 ioctl VIDIOCSYNC 1 
Jan 19 11:02:38 mybig grab_image buf1=2 buf2=3 Jan 19 11:02:38 mybig
mgajpg: closing device 
Jan 19 11:02:38 mybig mgacap: closing device 
Jan 19 11:02:38 mybig mga0-zr36060: ioctl ZR36060_SET_MODE 
Jan 19 11:02:38 mybig mga0-zr36060: Setting mode 0x0 
Jan 19 11:02:38 mybig zr: already in mode 0, ignoring jpg_enable 
Jan 19 11:02:38 mybig mga0-zr36060: ioctl ZR36060_CANBUFS 
Jan 19 11:02:38 mybig mgagrab d-active 4 
Jan 19 11:02:38 mybig mgacodec: starting reset 
Jan 19 11:02:38 mybig CS 50 0x00003000 
Jan 19 11:02:38 mybig mgacodec: reset codec done 
Jan 19 11:02:38 mybig msp3400 2-0040: scart switch: in2 => 0 (ACB=0x0e00)
Jan 19 11:02:38 mybig msp3400 2-0040: scart switch: in2 => 1 (ACB=0x0600)
Jan 19 11:02:38 mybig msp3400 2-0040: scart switch: in2 => 2 (ACB=0x1680)
Jan 19 11:02:38 mybig msp3400 2-0040: mono set_audmode

I'm lost my mind!!! ;-(
I thinks there is something in the kernel config!!! Or some difference in
xorg...or both...


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV