Re: dvb with Pinnacle PCTV Sat

Am Freitag, 4. März 2005 00:14 schrieb Lukas Kasprowicz:
> Ok nothing more about diseqc with cvs snapshot and disabled checks for
> FE_DISEQC_xxx
>
> But tuning failed. verbose returns "Not able to lock to the signal on the
> given frequency"
>
> OPEN_DVB: prog=ZDF, card=1, type=1, vid=0, aid=0
> code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> PROG: ZDF, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
> PROGRAM NUMBER 106: name=ZDF, freq=11953000
> DVB_OPEN_DEVICES(3)
> OPEN(0), file /dev/dvb/adapter0/demux0: FD=5, CNT=0
> OPEN(1), file /dev/dvb/adapter0/demux0: FD=6, CNT=1
> OPEN(2), file /dev/dvb/adapter0/demux0: FD=7, CNT=2
> DVB_SET_CHANNEL: new channel name=ZDF, card: 0, channel 106
> DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|011953000|027500000|0|H
> dvb_tune Freq: 11953000
> TUNE_IT, fd_frontend 4, fd_sec 0
> freq 11953000, srate 27500000, pol H, tone -1, specInv, diseqc 0,
> fe_modulation_t modulation,fe_code_rate_t HP_CodeRate, fe_transmit_mode_t
> TransmissionMode,fe_guard_interval_t guardInterval, fe_bandwidth_t
> bandwidth Using DVB card "Conexant CX24110 DVB-S"
> tuning DVB-S to Freq: 1353000, Pol: H Srate: 27500000, 22kHz: on, LNB:  0
> DISEQC SETTING SUCCEDED
> Getting frontend status
> Not able to lock to the signal on the given frequency
> dvb_tune, TUNING FAILED
> ERROR, COULDN'T SET CHANNEL  106: DVBIN_CLOSE, close(2), fd=7, COUNT=2
> DVBIN_CLOSE, close(1), fd=6, COUNT=1
> DVBIN_CLOSE, close(0), fd=5, COUNT=0
> Failed to open dvb://ZDF
>
>
> Lukas

I found out, that it is the same problem i have with mythtv.

Some channels are working others not. I scanned a week ago with mythtv and 
remembered it could find some channels like "Chamber TV" calling this channel 
with mplayer "dvb://Chamber TV" it is working.

# /usr/local/bin/mplayer -vo xv "dvb://Chamber TV"
MPlayer dev-CVS-050303-05:00-3.4.3-20050110 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE


Playing dvb://Chamber TV.
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
dvb_tune Freq: 12551000
Win32 LoadLibrary failed to load: 
avisynth.dll, /usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
TS file format detected.
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=55)...AUDIO MPA(pid=56) NO SUBS (yet)!  PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 56), video: 10000002(pid 55)...POS=39668
VIDEO:  MPEG2  480x576  (aspect 2)  25.000 fps  3750.0 kbps (468.8 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0" => local display)
==========================================================================

and so on.


But with e.g. ZDF it does not work. see previous message.



Lukas