Re: dvb with Pinnacle PCTV Sat

Am Freitag, 4. März 2005 16:53 schrieb Nico Sabbi:
>
> and
>
> cat ~/.szap/channels.conf.sat  |grep ZDF
>
> ?
>
>
> but is szap is working (what version do you have ? 1.1.0 or some cvs
> checkout) ?
> mplayer must too!
> unfrtunately it's not :(
>
hmm very interesting....
(Found out, that linuxtv's scan scanned 2x ZDF. deleted one, so it's the same 
in both channel.conf)

commands pasted in chonological order.


marina ~ # cat ~/.szap/channels.conf |grep ZDF:
ZDF:11954:h:0:27500:110:120:1:28006

marina ~ # cat ~/.mplayer/channels.conf.sat |grep ZDF:
ZDF:11954:h:0:27500:110:120:1:28006

marina ~ # szap -r "ZDF"
reading channels from file '/root/.szap/channels.conf'
zapping to 85 'ZDF':
sat 0, frequency = 11954 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 
0x0078
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
FE_DISEQC_SEND_BURST failed: Operation not supported
status 04 | signal 8c8c | snr 0000 | ber 00000202 | unc 0000f7ae |
status 1f | signal 8b8b | snr 544f | ber 00000217 | unc 00000000 | FE_HAS_LOCK

marina ~ # /usr/local/bin/mplayer dvb://ZDF
MPlayer dev-CVS-050303-05:00-3.4.3-20050110 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE


Playing dvb://ZDF.
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
dvb_tune Freq: 11954000
Win32 LoadLibrary failed to load: 
avisynth.dll, /usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
TS file format detected.
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=110)...AUDIO MPA(pid=120) NO SUBS (yet)!  PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 120), video: 10000002(pid 110)...POS=40232
VIDEO:  MPEG2  720x576  (aspect 2)  25.000 fps  15000.0 kbps (1875.0 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0" => local display)
==========================================================================
.
.
.


_This one working_ ... BUT when I do following after it worked



marina ~ # szap -r "ProSieben"
reading channels from file '/root/.szap/channels.conf'
zapping to 25 'ProSieben':
sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x00ff, apid = 
0x0100
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
FE_DISEQC_SEND_BURST failed: Operation not supported
status 04 | signal 8f8f | snr 0000 | ber 0000021a | unc 0000f822 |
status 1f | signal 8e8e | snr 4969 | ber 00000002 | unc 00000000 | FE_HAS_LOCK


marina ~ # /usr/local/bin/mplayer dvb://ZDF
MPlayer dev-CVS-050303-05:00-3.4.3-20050110 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE


Playing dvb://ZDF.
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
dvb_tune Freq: 11954000
Not able to lock to the signal on the given frequency
dvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL  106: Failed to open dvb://ZDF


Exiting... (End of file)



Very curios..


Lukas