DVB-C and channels.conf

Hello,

I am trying to use my DVB-C card. But mplayer seems to have problems
with the format of the channels.conf file, which I created with the
`scan' utility from the linuxtv-dvb-1.0.1 package.

I have attached channels.conf and the output of mplayer below.
Any help would be appreciated.

Ciao
Andreas


# cat ~/.mplayer/channels.conf
ProSieben:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:255:256:898
KABEL1:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:511:512:899
NEUN LIVE Television:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:767:768:897
DSF:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:1023:1024:900
Home Shopping Europe:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:1279:1280:40
SAT.1:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:1791:1792:46
N24:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:2047:2048:47
TELE 5:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:1535:1536:51
DPC.TV 3:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:2559:2560:661
Sonnenklar TV:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:2303:2304:32
DPC.TV 4:330000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:0:0:662



# mplayer -v -v dvb://
MPlayer dev-CVS-031007-03:42-3.3.1 (C) 2000-2003 MPlayer Team
 
CPU: Advanced Micro Devices Athlon MP/XP/XP-M Barton 1830 MHz (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
 
Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/andreas/.mplayer/config
Reading /home/andreas/.mplayer/codecs.conf: 61 audio & 157 video codecs
CommandLine: '-v' '-v' 'dvb://'
get_path('font/font.desc') -> '/home/andreas/.mplayer/font/font.desc'
font: Reading section: [info]
font: Reading section: [files]
RAW: /home/andreas/.mplayer/font//iso-8859-1-a.raw  4216 x 28, 256 colors
RAW: /home/andreas/.mplayer/font//iso-8859-1-b.raw  4216 x 28, 256 colors
font: Reading section: [characters]
font: Reading section: [files]
RAW: /home/andreas/.mplayer/font//osd-mplayer-a.raw  536 x 32, 256 colors
RAW: /home/andreas/.mplayer/font//osd-mplayer-b.raw  536 x 32, 256 colors
font: Reading section: [characters]
font: resampling alpha by factor 0.750 (192) DONE!
font: resampling alpha by factor 0.750 (192) DONE!
Font /home/andreas/.mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/home/andreas/.mplayer/input.conf'
Parsing input config file /home/andreas/.mplayer/input.conf
Input config file /home/andreas/.mplayer/input.conf parsed: 52 binds
Setting up LIRC support...
mplayer: could not open config file
mplayer: No such file or directory
Failed to read LIRC config file ~/.lircrc.
You will not be able to use your remote control.
get_path('.conf') -> '/home/andreas/.mplayer/.conf'
 
[[[init getch2]]]
 
Playing dvb://
TUNER TYPE SEEMS TO BE DVB-C
OPEN_DVB: prog=, card=1, type=3, vid=0, aid=0, file=channels.conf
get_path('channels.conf') -> '/home/andreas/.mplayer/channels.conf'
CONFIG_READ FILE: /home/andreas/.mplayer/channels.conf, type: 3
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: DPC.TV 4, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: channels.conf
 
 
DVBIN: no such channel "DPC.TV 4"
 
Failed to open dvb://
 
 
*** uninit(0x8)
 
[[[uninit getch2]]]
Config poped level=2
Config poped level=1
 
*** uninit(0x80)
vo: x11 uninit called but X11 not inited..
 
Exiting... (End of file)
max framesize was 0 bytes