Re: cinergyT2 problems - DVB API changes?

Robert Fendt <[email protected]>
Newsgroups gmane.comp.video.mplayer.user.dvb
Message-ID <20041223165752.0e62523d@vulcan> 
And thus spake Nico Sabbi <[email protected]>
Thu, 23 Dec 2004 16:20:18 +0100:

> yes, please post the log of mplayer -v dvb:// and  the content of your 
> ~/.mplayer/channels.conf

Files are attached. Since scan can produce channels.conf in 'vdr' and in
'zap' format, I tried both (xine seems to need 'zap' format). The messages
from mplayer make not too much sense, so it could indeed be a parsing
problem. But I could not make dvbstream produce a stream either. Well,
maybe the two problems are not related.

Regards,
Robert

_______________________________________________
MPlayer-dvb mailing list
[email protected]
http://mplayerhq.hu/mailman/listinfo/mplayer-dvb
channels.conf.zap (text/plain, 143 B) 
Das Erste:818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4881:4882:256
mplayer.log.zap (text/plain, 4.1 KB) 
MPlayer dev-CVS-041223-06:00-3.3.5 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.


CommandLine:init_freetype
get_path('font/font.desc') -> '/home/robert/.mplayer/font/font.desc'
font: can't open file: /home/robert/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using nanosleep() timing
get_path('input.conf') -> '/home/robert/.mplayer/input.conf'
Can't open input config file /home/robert/.mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Can't open input config file /etc/mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Falling back on default (hardcoded) input config
get_path('.conf') -> '/home/robert/.mplayer/.conf'
Playing dvb://.
TUNER TYPE SEEMS TO BE DVB-T
get_path('channels.conf.ter') -> '/home/robert/.mplayer/channels.conf.ter'
get_path('channels.conf') -> '/home/robert/.mplayer/channels.conf'
CONFIG_READ FILE: /home/robert/.mplayer/channels.conf, type: 2
TER, NUM: 0, NUM_FIELDS: 12, NAME: Das Erste, FREQ: 818000000 PIDS:  4881  4882  0 
TER, NUM: 1, NUM_FIELDS: 12, NAME: ZDF, FREQ: 586000000 PIDS:  545  546  0 
TER, NUM: 2, NUM_FIELDS: 12, NAME: WDR Dortmund, FREQ: 818000000 PIDS:  4929  4930  0 
TER, NUM: 3, NUM_FIELDS: 12, NAME: ProSieben, FREQ: 746000000 PIDS:  305  306  0 
TER, NUM: 4, NUM_FIELDS: 12, NAME: RTL Television, FREQ: 538000000 PIDS:  337  338  0 
TER, NUM: 5, NUM_FIELDS: 12, NAME: SAT.1, FREQ: 746000000 PIDS:  385  386  0 
TER, NUM: 6, NUM_FIELDS: 12, NAME: KABEL1, FREQ: 746000000 PIDS:  161  162  0 
TER, NUM: 7, NUM_FIELDS: 12, NAME: VOX, FREQ: 538000000 PIDS:  545  546  0 
TER, NUM: 8, NUM_FIELDS: 12, NAME: Super RTL, FREQ: 538000000 PIDS:  433  434  0 
TER, NUM: 9, NUM_FIELDS: 12, NAME: RTL2, FREQ: 538000000 PIDS:  353  354  0 
TER, NUM: 10, NUM_FIELDS: 12, NAME: N24, FREQ: 746000000 PIDS:  225  226  0 
TER, NUM: 11, NUM_FIELDS: 12, NAME: CNN Int., FREQ: 834000000 PIDS:  97  98  0 
TER, NUM: 12, NUM_FIELDS: 12, NAME: Info/3sat, FREQ: 586000000 PIDS:  561  562  0 
TER, NUM: 13, NUM_FIELDS: 12, NAME: arte, FREQ: 818000000 PIDS:  4897  4898  0 
TER, NUM: 14, NUM_FIELDS: 12, NAME: Phoenix, FREQ: 818000000 PIDS:  4913  4914  0 
TER, NUM: 15, NUM_FIELDS: 12, NAME: WDR Düsseldorf, FREQ: 818000000 PIDS:  4929  4930  0 
TER, NUM: 16, NUM_FIELDS: 12, NAME: WDR Essen, FREQ: 818000000 PIDS:  4929  4930  0 
TER, NUM: 17, NUM_FIELDS: 12, NAME: Doku/KiKa, FREQ: 586000000 PIDS:  593  594  0 
TER, NUM: 18, NUM_FIELDS: 12, NAME: Eurosport, FREQ: 834000000 PIDS:  577  578  0 
TER, NUM: 19, NUM_FIELDS: 12, NAME: VIVA, FREQ: 834000000 PIDS:  513  514  0 
TER, NUM: 20, NUM_FIELDS: 12, NAME: TERRA NOVA, FREQ: 834000000 PIDS:  609  610  0 
DVB_CONFIG, can't open device /dev/dvb/adapter1/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter2/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter3/frontend0, skipping
OPEN_DVB: prog=, card=1, type=2, vid=0, aid=0
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: , CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
PROGRAM NUMBER 0: name=Das Erste, freq=818000000
DVB_OPEN_DEVICES(3)
OPEN(0), file /dev/dvb/adapter0/demux0: FD=4, CNT=0
OPEN(1), file /dev/dvb/adapter0/demux0: FD=5, CNT=1
OPEN(2), file /dev/dvb/adapter0/demux0: FD=6, CNT=2
DVB_SET_CHANNEL: new channel name=Das Erste, card: 0, channel 0
DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|818000000|2|0|2|1|1|3
dvb_tune Freq: 818000000
TUNE_IT, fd_frontend 3, fd_sec 0
freq 818000000, srate 1083761633, pol Using DVB card "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
tuning DVB-T (in United Kingdom) to 818000000 Hz, bandwidth: 0
polling....
polling....
polling....
vo: x11 uninit called but X11 not inited..
channels.conf.vdr (text/plain, 79 B) 
Das Erste:818000:I999B8C23D23M16T8G4Y0:T:27500:4881:4882,4883:4884:0:256:0:0:0
mplayer.log.vdr (text/plain, 3.9 KB) 
MPlayer dev-CVS-041223-06:00-3.3.5 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.


CommandLine:init_freetype
get_path('font/font.desc') -> '/home/robert/.mplayer/font/font.desc'
font: can't open file: /home/robert/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using nanosleep() timing
get_path('input.conf') -> '/home/robert/.mplayer/input.conf'
Can't open input config file /home/robert/.mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Can't open input config file /etc/mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Falling back on default (hardcoded) input config
get_path('.conf') -> '/home/robert/.mplayer/.conf'
Playing dvb://.
TUNER TYPE SEEMS TO BE DVB-T
get_path('channels.conf.ter') -> '/home/robert/.mplayer/channels.conf.ter'
get_path('channels.conf') -> '/home/robert/.mplayer/channels.conf'
CONFIG_READ FILE: /home/robert/.mplayer/channels.conf, type: 2
TER, NUM: 0, NUM_FIELDS: 12, NAME: Das Erste, FREQ: 818000 PIDS:  0  0  0 
TER, NUM: 1, NUM_FIELDS: 12, NAME: RTL Television, FREQ: 538000 PIDS:  0  0  0 
TER, NUM: 2, NUM_FIELDS: 12, NAME: RTL2, FREQ: 538000 PIDS:  0  0  0 
TER, NUM: 3, NUM_FIELDS: 12, NAME: Super RTL, FREQ: 538000 PIDS:  0  0  0 
TER, NUM: 4, NUM_FIELDS: 12, NAME: VOX, FREQ: 538000 PIDS:  0  0  0 
TER, NUM: 5, NUM_FIELDS: 12, NAME: [0202], FREQ: 586000 PIDS:  0  0  0 
TER, NUM: 6, NUM_FIELDS: 12, NAME: [0203], FREQ: 586000 PIDS:  0  0  0 
TER, NUM: 7, NUM_FIELDS: 12, NAME: [0205], FREQ: 586000 PIDS:  0  0  0 
TER, NUM: 8, NUM_FIELDS: 12, NAME: ProSieben, FREQ: 746000 PIDS:  0  0  0 
TER, NUM: 9, NUM_FIELDS: 12, NAME: SAT.1, FREQ: 746000 PIDS:  0  0  0 
TER, NUM: 10, NUM_FIELDS: 12, NAME: KABEL1, FREQ: 746000 PIDS:  0  0  0 
TER, NUM: 11, NUM_FIELDS: 12, NAME: N24, FREQ: 746000 PIDS:  0  0  0 
TER, NUM: 12, NUM_FIELDS: 12, NAME: arte, FREQ: 818000 PIDS:  0  0  0 
TER, NUM: 13, NUM_FIELDS: 12, NAME: Phoenix, FREQ: 818000 PIDS:  0  0  0 
TER, NUM: 14, NUM_FIELDS: 12, NAME: WDR Dortmund, FREQ: 818000 PIDS:  0  0  0 
TER, NUM: 15, NUM_FIELDS: 12, NAME: WDR Düsseldorf, FREQ: 818000 PIDS:  0  0  0 
TER, NUM: 16, NUM_FIELDS: 12, NAME: WDR Essen, FREQ: 818000 PIDS:  0  0  0 
TER, NUM: 17, NUM_FIELDS: 12, NAME: Eurosport, FREQ: 834000 PIDS:  0  0  0 
TER, NUM: 18, NUM_FIELDS: 12, NAME: VIVA, FREQ: 834000 PIDS:  0  0  0 
TER, NUM: 19, NUM_FIELDS: 12, NAME: TERRA NOVA, FREQ: 834000 PIDS:  0  0  0 
TER, NUM: 20, NUM_FIELDS: 12, NAME: CNN Int., FREQ: 834000 PIDS:  0  0  0 
DVB_CONFIG, can't open device /dev/dvb/adapter1/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter2/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter3/frontend0, skipping
OPEN_DVB: prog=, card=1, type=2, vid=0, aid=0
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: , CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
PROGRAM NUMBER 0: name=Das Erste, freq=818000
DVB_OPEN_DEVICES(3)
OPEN(0), file /dev/dvb/adapter0/demux0: FD=4, CNT=0
OPEN(1), file /dev/dvb/adapter0/demux0: FD=5, CNT=1
OPEN(2), file /dev/dvb/adapter0/demux0: FD=6, CNT=2
DVB_SET_CHANNEL: new channel name=Das Erste, card: 0, channel 0
DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|000818000|2|141515888|9|1083028352|-1073753196|3
dvb_tune Freq: 818000
TUNE_IT, fd_frontend 3, fd_sec 0
freq 818000, srate 1083761633, pol Using DVB card "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
tuning DVB-T (in United Kingdom) to 818000000 Hz, bandwidth: 141515888
polling....
polling....
polling....
vo: x11 uninit called but X11 not inited..
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.