Re: error while building mga_vid (debian, 2.6.9)
Robin Humble <[email protected]> Wed, 16 Feb 2005 20:00:40 -0500
| Newsgroups | gmane.comp.video.mplayer.user.matrox |
|---|---|
| Message-ID | <[email protected]> |
On Tue, Feb 15, 2005 at 10:34:22AM -0500, Alvaro Garriga wrote: >Have you tried compiling the plain vanilla kernel and then compiling the I'm having troubles with mga_vid for fc3. I'm starting to suspect udev is the problem as that's probably the main difference to your (working) setup on debian. I have tried compiling mga_vid against a fc3 kernel and also against a stock 2.6.10 (using a .config mostly the same as fc3's), and the machine either Oops's (attached) or locks up hard. I'm not running X11. G400 Max DH, Athlon700. Has anyone had any success with fc3 or udev? cheers, robin _______________________________________________ MPlayer-matrox mailing list [email protected] http://mplayerhq.hu/mailman/listinfo/mplayer-matrox
oops
(text/plain, 2.6 KB)
... Jan 25 02:46:57 prego kernel: fb0: MATROX frame buffer device Jan 25 02:46:57 prego kernel: Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi Jan 25 02:46:57 prego kernel: Unable to handle kernel paging request at virtual address 4d3e3660 Jan 25 02:46:57 prego kernel: printing eip: Jan 25 02:46:57 prego kernel: c01dad36 Jan 25 02:46:57 prego kernel: *pde = 00000000 Jan 25 02:46:57 prego kernel: Oops: 0000 [#1] Jan 25 02:46:57 prego kernel: Modules linked in: mga_vid(U) matroxfb_base matroxfb_DAC1064 matroxfb_accel matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc usblp md5 ipv6 ipt_state ipt_MASQUERADE ip_conntrack_ftp iptable_filter iptable_nat ip_conntrack ip_tables dm_mod uhci_hcd parport_pc parport i2c_viapro i2c_core emu10k1_gp snd_via82xx gameport snd_mpu401_uart snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul snd_seq snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore epic100 8139too mii sd_mod floppy sata_sil libata scsi_mod xfs Jan 25 02:46:57 prego kernel: CPU: 0 Jan 25 02:46:57 prego kernel: EIP: 0060:[<c01dad36>] Not tainted VLI Jan 25 02:46:57 prego kernel: EFLAGS: 00010213 (2.6.10-1.741_FC3) Jan 25 02:46:57 prego kernel: EIP is at pci_find_subsys+0xd0/0x154 Jan 25 02:46:57 prego kernel: eax: 00000000 ebx: ffffffff ecx: 4d3e363c edx: 4d3e363c Jan 25 02:46:57 prego kernel: esi: d74a0f9c edi: 00000057 ebp: ffffffff esp: d74a0f78 Jan 25 02:46:57 prego kernel: ds: 007b es: 007b ss: 0068 Jan 25 02:46:57 prego kernel: Process modprobe (pid: 4218, threadinfo=d74a0000 task=d71526b0) Jan 25 02:46:57 prego kernel: Stack: d8b29e00 00000000 00952afa d74a0fb0 c01dadc5 ffffffff d8b289c0 d8b28145 Jan 25 02:46:57 prego kernel: 0000102b ffffffff 00000000 00952afa 09675128 00952afa d74a0000 c0135965 Jan 25 02:46:57 prego kernel: 0967c110 09675128 c010336b 0967c110 0000a31c 09675128 09675128 00952afa Jan 25 02:46:57 prego kernel: Call Trace: Jan 25 02:46:57 prego kernel: [<c01dadc5>] pci_find_device+0xb/0xe Jan 25 02:46:57 prego kernel: [<d8b28145>] mga_vid_initialize+0x25/0x2e0 [mga_vid] Jan 25 02:46:57 prego kernel: [<c0135965>] sys_init_module+0x1c4/0x294 Jan 25 02:46:57 prego kernel: [<c010336b>] syscall_call+0x7/0xb Jan 25 02:46:57 prego kernel: Code: cc 18 35 c0 0a ff 30 c0 c7 05 d0 18 35 c0 aa 00 00 00 75 46 8b 15 a8 15 35 c0 eb 40 81 fa a8 15 35 c0 74 3c 83 ff ff 89 d1 74 08 <0f> b7 42 24 39 f8 75 27 83 fe ff 74 08 0f b7 41 26 39 f0 75 1a Jan 25 02:46:58 prego kernel: <6>matroxfb_crtc2: secondary head of fb0 was registered as fb1 ...