compilation mga_vid
Markus Hiereth <[email protected]> Tue, 04 Jul 2006 19:09:32 +0200
| Newsgroups | gmane.comp.video.mplayer.user.matrox |
|---|---|
| Message-ID | <[email protected]> |
Hello,
I would like to compile the mga_vid driver of the MPlayer-1.0pre8
tar-archives.
I use an installation of xubuntu 6.06 with a precompiled kernel 2.6.15
and installed the linux-headers deb-packages linux-headers-2.6.15-23-386 and
linux-headers-2.6.15-23.
These are the first lines of the output on the screen..
root@lune:/usr/src/tar/MPlayer-1.0pre8/drivers# make
make mga_vid.ko mga_vid_test
make[1]: Entering directory `/usr/src/tar/MPlayer-1.0pre8/drivers'
make -C /lib/modules/`uname -r`/build
SUBDIRS=/usr/src/tar/MPlayer-1.0pre8/drivers modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.15-23-386'
CC [M] /usr/src/tar/MPlayer-1.0pre8/drivers/mga_vid.o
In Datei, eingefügt von include/linux/irq.h:22,
von include/asm/hardirq.h:6,
von include/linux/hardirq.h:7,
von include/linux/interrupt.h:11,
von include/linux/rcuref.h:36,
von include/linux/fs.h:12,
von include/linux/mm.h:15,
von /usr/src/tar/MPlayer-1.0pre8/drivers/mga_vid.c:42:
include/asm/irq.h:16:25: Fehler: irq_vectors.h: No such file or directory
In file included from include/asm/hardirq.h:6,
from include/linux/hardirq.h:7,
Another trial to compile mga_vid, with complete kernel-source package
2.6.15-7 installed, led to other problems (e.g. make modules und make
modules_install are stopped) due to errors in the package. Afterwards,
make for mga_vid was impossible too.
I attached the dmesg as it might be informative. How can I solve the
problems?
Thank You for advice.
Markus
----- Forwarded message from Markus Hiereth -----
Date: Sat, 01 Jul 2006 07:45:39 +0200
ich versuche gerade, in Zusammenhang mit der Installation des mplayers
den Treiber mga_vid zu kompilieren und dabei wird Ihre Datei irq.h
aufgerufen, die wiederum eine Datei irq_vectors.h einschließen möchte.
Ich habe zwar keinen Durchblick welche Rolle die Dateien irq.h und
irq_vectors.h spielen, aber das Dateipaar ist eben das erste, das in den
Fehlermeldungen von make auftaucht.
Information zum System:
Installiert ist Ubuntu 6.06 mit fertigkompiliertem Kernel 2.6.15. Da es
mir angeblich die Installation des Kernel-Source-Paketes erspart und auf
der Ubuntu-CD auch nichts anderes ist, habe ich zu dieser
Grundinstallation nur die Paket linux-headers-2.6.15-23-386 und
linux-headers-2.6.15-23 nachinstalliert.
Beim mplayer klappte das Kompilieren, nur meldet er beim Starten, dass
er für die Grafikdarstellung mga_vid benutzen möchte und diesen Treiber
habe ich noch nicht erzeugen können. So komme ich aktuell nur in den
Genuß der Tonspur meiner mpg- und avi-Dateien.
Vielleicht können Sie mir weiterhelfen. Viele Grüße
Markus Hiereth
_______________________________________________
MPlayer-matrox mailing list
[email protected]
http://lists.mplayerhq.hu/mailman/listinfo/mplayer-matrox
dmesg-2.6.15-23
(text/plain, 17.7 KB)
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [4294667.296000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 511MB LOWMEM available. [4294667.296000] On node 0 totalpages: 131056 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 126960 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 AMI ) @ 0x000fa8c0 [4294667.296000] ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000 [4294667.296000] ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030 [4294667.296000] ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0 [4294667.296000] ACPI: DSDT (v001 VIA K7VT4 0x00001000 INTL 0x02002024) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x808 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:3 APIC version 16 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: auto BOOT_IMAGE=Ubuntu606-k26d7 ro root=307 [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 699.441 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x50 [4294668.135000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294668.138000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294668.173000] Memory: 508668k/524224k available (1976k kernel code, 15028k reserved, 606k data, 288k init, 0k highmem) [4294668.173000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294668.233000] Calibrating delay using timer specific routine.. 1400.03 BogoMIPS (lpj=700015) [4294668.233000] Security Framework v1.0.0 initialized [4294668.233000] SELinux: Disabled at boot. [4294668.233000] Mount-cache hash table entries: 512 [4294668.233000] CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 [4294668.233000] CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 [4294668.233000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294668.233000] CPU: L2 Cache: 64K (64 bytes/line) [4294668.233000] CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000 [4294668.233000] mtrr: v2.0 (20020519) [4294668.233000] CPU: AMD Duron(tm) stepping 00 [4294668.233000] Enabling fast FPU save and restore... done. [4294668.234000] Checking 'hlt' instruction... OK. [4294668.238000] checking if image is initramfs... it is [4294669.797000] Freeing initrd memory: 6837k freed [4294669.817000] ACPI: Looking for DSDT ... not found! [4294669.823000] ENABLING IO-APIC IRQs [4294669.823000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294669.934000] NET: Registered protocol family 16 [4294669.934000] EISA bus registered [4294669.934000] ACPI: bus type pci registered [4294669.936000] PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 [4294669.936000] PCI: Using configuration type 1 [4294669.937000] ACPI: Subsystem revision 20051216 [4294669.949000] ACPI: Interpreter enabled [4294669.949000] ACPI: Using IOAPIC for interrupt routing [4294669.950000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.950000] PCI: Probing PCI hardware (bus 00) [4294669.957000] Boot video device is 0000:01:00.0 [4294669.957000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.998000] ACPI: Power Resource [URP1] (off) [4294669.998000] ACPI: Power Resource [URP2] (off) [4294669.999000] ACPI: Power Resource [FDDP] (off) [4294669.999000] ACPI: Power Resource [LPTP] (off) [4294670.003000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [4294670.004000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) [4294670.005000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15) [4294670.006000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [4294670.007000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294670.008000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294670.010000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294670.011000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294670.012000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294670.012000] pnp: PnP ACPI init [4294670.020000] pnp: PnP ACPI: found 11 devices [4294670.020000] PnPBIOS: Disabled by ACPI PNP [4294670.020000] PCI: Using ACPI for IRQ routing [4294670.020000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294670.024000] PCI: Bridge: 0000:00:01.0 [4294670.024000] IO window: disabled. [4294670.024000] MEM window: dee00000-dfefffff [4294670.024000] PREFETCH window: dad00000-decfffff [4294670.024000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294670.025000] audit: initializing netlink socket (disabled) [4294670.025000] audit(1151970533.024:1): initialized [4294670.025000] VFS: Disk quotas dquot_6.5.1 [4294670.026000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294670.026000] Initializing Cryptographic API [4294670.026000] io scheduler noop registered [4294670.026000] io scheduler anticipatory registered [4294670.026000] io scheduler deadline registered [4294670.026000] io scheduler cfq registered [4294670.026000] PCI: Bypassing VIA 8237 APIC De-Assert Message [4294670.027000] isapnp: Scanning for PnP cards... [4294670.384000] isapnp: No Plug & Play device found [4294670.415000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294670.415000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294670.416000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.416000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294670.416000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.420000] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.421000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.422000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294670.422000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294670.422000] mice: PS/2 mouse device common for all mice [4294670.422000] EISA: Probing bus 0 at eisa.0 [4294670.423000] EISA: Detected 0 cards. [4294670.423000] NET: Registered protocol family 2 [4294670.433000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes) [4294670.433000] TCP established hash table entries: 32768 (order: 5, 131072 bytes) [4294670.434000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes) [4294670.434000] TCP: Hash tables configured (established 32768 bind 32768) [4294670.434000] TCP reno registered [4294670.435000] TCP bic registered [4294670.435000] NET: Registered protocol family 1 [4294670.435000] NET: Registered protocol family 8 [4294670.435000] NET: Registered protocol family 20 [4294670.435000] Using IPI Shortcut mode [4294670.435000] ACPI wakeup devices: [4294670.435000] PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD PS2M PS2K AC9 MC9 ILAN SLPB [4294670.436000] ACPI: (supports S0 S1 S4 S5) [4294670.436000] Freeing unused kernel memory: 288k freed [4294670.447000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.574000] Capability LSM initialized [4294671.948000] SCSI subsystem initialized [4294671.952000] ACPI: bus type scsi registered [4294671.952000] libata version 1.20 loaded. [4294671.956000] sata_via 0000:00:0f.0: version 1.1 [4294671.956000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 [4294671.956000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9 [4294671.957000] sata_via 0000:00:0f.0: routed to hard irq line 9 [4294671.957000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169 [4294671.957000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169 [4294672.158000] ata1: no device found (phy stat 00000000) [4294672.158000] scsi0 : sata_via [4294672.359000] ata2: no device found (phy stat 00000000) [4294672.359000] scsi1 : sata_via [4294672.397000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [4294672.397000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 [4294672.397000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 [4294672.397000] VP_IDE: chipset revision 6 [4294672.397000] VP_IDE: not 100% native mode: will probe irqs later [4294672.397000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [4294672.397000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [4294672.398000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [4294672.398000] Probing IDE interface ide0... [4294672.784000] hda: Maxtor 32049H3, ATA DISK drive [4294673.498000] hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive [4294673.550000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.558000] Probing IDE interface ide1... [4294674.352000] hdc: CD-540E, ATAPI CD/DVD-ROM drive [4294675.066000] hdd: AOPEN CD-RW CRW4850 1.04 20021101, ATAPI CD/DVD-ROM drive [4294675.118000] ide1 at 0x170-0x177,0x376 on irq 15 [4294675.139000] hda: max request size: 128KiB [4294675.193000] hda: 40021632 sectors (20491 MB) w/512KiB Cache, CHS=39704/16/63, UDMA(100) [4294675.193000] hda: cache flushes not supported [4294675.193000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > [4294675.298000] hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) [4294675.299000] Uniform CD-ROM driver Revision: 3.20 [4294675.328000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [4294676.050000] usbcore: registered new driver usbfs [4294676.050000] usbcore: registered new driver hub [4294676.082000] USB Universal Host Controller Interface driver v2.3 [4294676.083000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 [4294676.083000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 [4294676.083000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294676.085000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294676.085000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c800 [4294676.086000] hub 1-0:1.0: USB hub found [4294676.086000] hub 1-0:1.0: 2 ports detected [4294676.187000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177 [4294676.189000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1 [4294676.189000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294676.189000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294676.189000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000cc00 [4294676.190000] hub 2-0:1.0: USB hub found [4294676.190000] hub 2-0:1.0: 2 ports detected [4294676.291000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177 [4294676.291000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 [4294676.291000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294676.291000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294676.292000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d000 [4294676.292000] hub 3-0:1.0: USB hub found [4294676.292000] hub 3-0:1.0: 2 ports detected [4294676.394000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177 [4294676.394000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1 [4294676.394000] uhci_hcd 0000:00:10.3: UHCI Host Controller [4294676.394000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294676.395000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d400 [4294676.395000] hub 4-0:1.0: USB hub found [4294676.396000] hub 4-0:1.0: 2 ports detected [4294676.504000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177 [4294676.504000] PCI: Via IRQ fixup for 0000:00:10.4, from 3 to 1 [4294676.504000] ehci_hcd 0000:00:10.4: EHCI Host Controller [4294676.505000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [4294676.505000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xdfffbe00 [4294676.505000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294676.506000] hub 5-0:1.0: USB hub found [4294676.506000] hub 5-0:1.0: 8 ports detected [4294676.883000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected] [4294676.944000] cdrom: open failed. [4294677.177000] cdrom: open failed. [4294677.238000] Attempting manual resume [4294687.361000] Linux agpgart interface v0.101 (c) Dave Jones [4294687.368000] agpgart: Detected VIA KT400/KT400A/KT600 chipset [4294687.381000] agpgart: AGP aperture is 64M @ 0xe0000000 [4294688.103000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294688.108000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294688.155000] ide-floppy driver 0.99.newide [4294688.206000] hdb: No disk in drive [4294688.257000] hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm [4294688.737000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [4294688.737000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185 [4294688.737000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9 [4294688.737000] eth0: VIA Rhine II at 0x1c000, 00:13:8f:1a:c5:c5, IRQ 185. [4294688.738000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [4294688.970000] logips2pp: Detected unknown logitech mouse model 1 [4294688.989000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 [4294688.989000] PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 1 [4294688.989000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [4294689.064000] input: PS/2 Logitech Mouse as /class/input/input1 [4294689.143000] Driver for 1-wire Dallas network protocol. [4294689.219000] Floppy drive(s): fd0 is 1.44M [4294689.234000] FDC 0 is a post-1991 82077 [4294689.258000] Real Time Clock Driver v1.12 [4294689.513000] matrox_w1 0000:01:00.0: Matrox G400 GPIO transport layer for 1-wire. [4294690.259000] input: PC Speaker as /class/input/input2 [4294690.593000] parport: PnPBIOS parport detected. [4294690.593000] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [4294690.743000] hdb: No disk in drive [4294690.959000] ts: Compaq touchscreen protocol output [4294692.384000] eth0: link down [4294692.646000] hdb: No disk in drive [4294693.587000] NET: Registered protocol family 17 [4294693.977000] lp0: using parport0 (interrupt-driven). [4294694.135000] Adding 136512k swap on /dev/hda6. Priority:-1 extents:1 across:136512k [4294695.117000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294695.117000] md: bitmap version 4.39 [4294697.485000] hdb: No disk in drive [4294697.538000] cdrom: open failed. [4294697.836000] cdrom: open failed. [4294697.838000] cdrom: open failed. [4294699.745000] FAT: Unrecognized mount option "utf8" or missing value [4294707.459000] ACPI: Power Button (FF) [PWRF] [4294707.459000] ACPI: Power Button (CM) [PWRB] [4294707.459000] ACPI: Sleep Button (CM) [SLPB] [4294707.721000] ibm_acpi: ec object not found [4294707.773000] pcc_acpi: loading... [4294708.550000] powernow: No powernow capabilities detected [4294715.172000] ppdev: user-space parallel port driver [4294715.676000] apm: BIOS not found. [4294717.386000] [drm] Initialized drm 1.0.1 20051102 [4294717.402000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201 [4294717.406000] [drm] Initialized mga 3.2.1 20051102 on minor 0 [4294717.408000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [4294717.408000] agpgart: Device is in legacy mode, falling back to 2.x [4294717.408000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [4294717.408000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [4298683.155000] NET: Registered protocol family 10 [4298683.156000] lo: Disabled Privacy Extensions [4298683.156000] ADDRCONF(NETDEV_UP): eth0: link is not ready [4298683.156000] IPv6 over IPv4 tunneling driver [4310166.704000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [4310166.704000] agpgart: Device is in legacy mode, falling back to 2.x [4310166.704000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [4310166.704000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode