Re: compilation mga_vid
Markus Hiereth <[email protected]> Wed, 05 Jul 2006 08:08:24 +0200
| Newsgroups | gmane.comp.video.mplayer.user.matrox |
|---|---|
| Message-ID | <[email protected]> |
Hello Gergo and Attila,
A) thank You very much for You mga_vid source files.
B) I tried both of them, with
http://dice.mfa.kfki.hu/dl/mga-vid-2.6.15-rc5.tar.gz
I succeeded. with the module generated from
http://attila.kinali.ch/mga/mga_vid-svn-r241.tar.gz
under identical conditions (loaded manually with insmod) I got an error
message
Couldn't open driver: /dev/mga_vid
Probably this helps for further improvement.
C) Maybe I could help to update the documentation on
MPlayer-1.0pre8/DOCS/HTML/xx/output-trad.html#mga_vid
There are technical changes char-major now 83 as announced by both of
You and some instructions are probably not correct for my Linux
installation (Ubuntu / Debian):
DOCUMENT
CORRECTION/SUBSTITUTION/ADDITION
----------------- chgrp video
/dev/mga_vid
----------------- chmod g+w
/dev/mga_vid
mga_vid.o mga_vid.ko
/etc/modules.conf /etc/modprobe.conf
alias char-major-178 mga_vid alias char-major-83 mga_vid
Sequence 1.2.3.4.5 1., copying module into
/lib/modules/..., 5., 2.,3.,4.,
I come the the conclusion that a change of sequence is necessary as,
having compiled MPlayer as last step, I could not find the device
/dev/mga_vid anymore. Though it's quite strange, I regard it as possible
that it has been deleted during compilation. Probably You know what
really happened on my PC.
In case it helps, I would introduce the changes in into html and pass
them to the documentation team.
D)
One last thing I do not understand is the repeated appearance of the
mga_vid in the boot logging. (See attachment dmesg...)
Yours
Markus
_______________________________________________
MPlayer-matrox mailing list
[email protected]
http://lists.mplayerhq.hu/mailman/listinfo/mplayer-matrox
tests-mga_vid
(text/plain, 1.7 KB)
Manually loaded mga_vid.ko~ (= Gergo's) and mga_vid.ko (= Attilas)
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# ls -l mga*
-rw-r--r-- 1 root root 74629 2006-05-23 18:55 mga.ko
-rw-r--r-- 1 root root 17006 2006-07-05 06:27 mga_vid.ko
-rw-r--r-- 1 root root 17422 2006-07-05 02:31 mga_vid.ko~
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# rmmod
mga_vid
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# lsmod |
grep mga
mga 66944 1
drm 73236 2 mga
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# insmod
mga_vid.ko~
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# lsmod |
grep mga
mga_vid 14184 0
mga 66944 1
drm 73236 2 mga
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm#
/usr/src/mga_vid-r241/mga_vid_test
.svn/ .tmp_versions/
Testing MGA G400 Backend Scaler with 16 MB of RAM
mga_vid_base = 0xb7d81000
(1) There should be a green square, offset by 10 pixels from
the upper left corner displayed
(2) There should be a cool mosaic like pattern now.
(3) There should be a color blend with black, red, purple, blue
corners (starting top left going CW)
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# rmmod mga_vid
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# insmod mga_vid.ko
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm# lsmod |
grep mga
mga_vid 13800 0
mga 66944 1
drm 73236 2 mga
root@lune:/lib/modules/2.6.15-23-386/kernel/drivers/char/drm#
/usr/src/mga_vid-r241/mga_vid_test
Couldn't open driver: /dev/mga_vid
dmesg-2.6.15-23_060706
(text/plain, 20.3 KB)
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [4294667.296000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 511MB LOWMEM available. [4294667.296000] On node 0 totalpages: 131056 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 126960 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 AMI ) @ 0x000fa8c0 [4294667.296000] ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000 [4294667.296000] ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030 [4294667.296000] ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0 [4294667.296000] ACPI: DSDT (v001 VIA K7VT4 0x00001000 INTL 0x02002024) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x808 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:3 APIC version 16 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: auto BOOT_IMAGE=Ubuntu606-k26d7 ro root=307 [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 699.436 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x50 [4294671.070000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294671.073000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294671.108000] Memory: 508668k/524224k available (1976k kernel code, 15028k reserved, 606k data, 288k init, 0k highmem) [4294671.108000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294671.169000] Calibrating delay using timer specific routine.. 1400.03 BogoMIPS (lpj=700018) [4294671.169000] Security Framework v1.0.0 initialized [4294671.169000] SELinux: Disabled at boot. [4294671.169000] Mount-cache hash table entries: 512 [4294671.169000] CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 [4294671.169000] CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000 [4294671.169000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294671.169000] CPU: L2 Cache: 64K (64 bytes/line) [4294671.169000] CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000 [4294671.169000] mtrr: v2.0 (20020519) [4294671.169000] CPU: AMD Duron(tm) stepping 00 [4294671.169000] Enabling fast FPU save and restore... done. [4294671.170000] Checking 'hlt' instruction... OK. [4294671.174000] checking if image is initramfs... it is [4294672.732000] Freeing initrd memory: 6837k freed [4294672.752000] ACPI: Looking for DSDT ... not found! [4294672.758000] ENABLING IO-APIC IRQs [4294672.758000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294672.870000] NET: Registered protocol family 16 [4294672.870000] EISA bus registered [4294672.870000] ACPI: bus type pci registered [4294672.872000] PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 [4294672.872000] PCI: Using configuration type 1 [4294672.873000] ACPI: Subsystem revision 20051216 [4294672.885000] ACPI: Interpreter enabled [4294672.885000] ACPI: Using IOAPIC for interrupt routing [4294672.886000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294672.886000] PCI: Probing PCI hardware (bus 00) [4294672.893000] Boot video device is 0000:01:00.0 [4294672.893000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294672.934000] ACPI: Power Resource [URP1] (off) [4294672.934000] ACPI: Power Resource [URP2] (off) [4294672.934000] ACPI: Power Resource [FDDP] (off) [4294672.935000] ACPI: Power Resource [LPTP] (off) [4294672.939000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [4294672.940000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) [4294672.941000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15) [4294672.942000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [4294672.943000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294672.944000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294672.945000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294672.947000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [4294672.948000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294672.948000] pnp: PnP ACPI init [4294672.956000] pnp: PnP ACPI: found 11 devices [4294672.956000] PnPBIOS: Disabled by ACPI PNP [4294672.956000] PCI: Using ACPI for IRQ routing [4294672.956000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294672.960000] PCI: Bridge: 0000:00:01.0 [4294672.960000] IO window: disabled. [4294672.960000] MEM window: dee00000-dfefffff [4294672.960000] PREFETCH window: dad00000-decfffff [4294672.960000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294672.961000] audit: initializing netlink socket (disabled) [4294672.961000] audit(1152079333.960:1): initialized [4294672.961000] VFS: Disk quotas dquot_6.5.1 [4294672.961000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294672.962000] Initializing Cryptographic API [4294672.962000] io scheduler noop registered [4294672.962000] io scheduler anticipatory registered [4294672.962000] io scheduler deadline registered [4294672.962000] io scheduler cfq registered [4294672.962000] PCI: Bypassing VIA 8237 APIC De-Assert Message [4294672.963000] isapnp: Scanning for PnP cards... [4294673.320000] isapnp: No Plug & Play device found [4294673.351000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294673.352000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294673.352000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294673.352000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294673.352000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294673.356000] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294673.358000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294673.358000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294673.358000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294673.358000] mice: PS/2 mouse device common for all mice [4294673.359000] EISA: Probing bus 0 at eisa.0 [4294673.359000] EISA: Detected 0 cards. [4294673.359000] NET: Registered protocol family 2 [4294673.369000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes) [4294673.369000] TCP established hash table entries: 32768 (order: 5, 131072 bytes) [4294673.370000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes) [4294673.370000] TCP: Hash tables configured (established 32768 bind 32768) [4294673.370000] TCP reno registered [4294673.371000] TCP bic registered [4294673.371000] NET: Registered protocol family 1 [4294673.371000] NET: Registered protocol family 8 [4294673.371000] NET: Registered protocol family 20 [4294673.371000] Using IPI Shortcut mode [4294673.371000] ACPI wakeup devices: [4294673.371000] PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD PS2M PS2K AC9 MC9 ILAN SLPB [4294673.372000] ACPI: (supports S0 S1 S4 S5) [4294673.372000] Freeing unused kernel memory: 288k freed [4294673.383000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294673.511000] Capability LSM initialized [4294674.894000] SCSI subsystem initialized [4294674.899000] ACPI: bus type scsi registered [4294674.899000] libata version 1.20 loaded. [4294674.903000] sata_via 0000:00:0f.0: version 1.1 [4294674.903000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 [4294674.903000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9 [4294674.903000] sata_via 0000:00:0f.0: routed to hard irq line 9 [4294674.903000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169 [4294674.903000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169 [4294675.104000] ata1: no device found (phy stat 00000000) [4294675.104000] scsi0 : sata_via [4294675.305000] ata2: no device found (phy stat 00000000) [4294675.305000] scsi1 : sata_via [4294675.344000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [4294675.344000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 [4294675.344000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 [4294675.344000] VP_IDE: chipset revision 6 [4294675.344000] VP_IDE: not 100% native mode: will probe irqs later [4294675.344000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [4294675.344000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [4294675.344000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [4294675.345000] Probing IDE interface ide0... [4294675.731000] hda: Maxtor 32049H3, ATA DISK drive [4294676.445000] hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive [4294676.496000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294676.505000] Probing IDE interface ide1... [4294677.299000] hdc: CD-540E, ATAPI CD/DVD-ROM drive [4294678.013000] hdd: AOPEN CD-RW CRW4850 1.04 20021101, ATAPI CD/DVD-ROM drive [4294678.064000] ide1 at 0x170-0x177,0x376 on irq 15 [4294678.086000] hda: max request size: 128KiB [4294678.140000] hda: 40021632 sectors (20491 MB) w/512KiB Cache, CHS=39704/16/63, UDMA(100) [4294678.140000] hda: cache flushes not supported [4294678.140000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > [4294678.234000] hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) [4294678.234000] Uniform CD-ROM driver Revision: 3.20 [4294678.260000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [4294678.991000] usbcore: registered new driver usbfs [4294678.992000] usbcore: registered new driver hub [4294679.025000] USB Universal Host Controller Interface driver v2.3 [4294679.026000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 [4294679.026000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 [4294679.027000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294679.028000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294679.028000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c800 [4294679.029000] hub 1-0:1.0: USB hub found [4294679.029000] hub 1-0:1.0: 2 ports detected [4294679.130000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177 [4294679.132000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1 [4294679.132000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294679.132000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294679.132000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000cc00 [4294679.133000] hub 2-0:1.0: USB hub found [4294679.133000] hub 2-0:1.0: 2 ports detected [4294679.234000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177 [4294679.234000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 [4294679.234000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294679.234000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294679.235000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d000 [4294679.235000] hub 3-0:1.0: USB hub found [4294679.235000] hub 3-0:1.0: 2 ports detected [4294679.337000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177 [4294679.337000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1 [4294679.337000] uhci_hcd 0000:00:10.3: UHCI Host Controller [4294679.337000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294679.338000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d400 [4294679.338000] hub 4-0:1.0: USB hub found [4294679.339000] hub 4-0:1.0: 2 ports detected [4294679.447000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177 [4294679.447000] PCI: Via IRQ fixup for 0000:00:10.4, from 3 to 1 [4294679.447000] ehci_hcd 0000:00:10.4: EHCI Host Controller [4294679.448000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [4294679.448000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xdfffbe00 [4294679.448000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294679.449000] hub 5-0:1.0: USB hub found [4294679.449000] hub 5-0:1.0: 8 ports detected [4294679.830000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected] [4294679.896000] cdrom: open failed. [4294680.124000] cdrom: open failed. [4294680.184000] Attempting manual resume [4294690.319000] Linux agpgart interface v0.101 (c) Dave Jones [4294690.326000] agpgart: Detected VIA KT400/KT400A/KT600 chipset [4294690.818000] agpgart: AGP aperture is 64M @ 0xe0000000 [4294691.228000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294691.233000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294691.339000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [4294691.339000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185 [4294691.339000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9 [4294691.340000] eth0: VIA Rhine II at 0x1c000, 00:13:8f:1a:c5:c5, IRQ 185. [4294691.341000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [4294691.607000] logips2pp: Detected unknown logitech mouse model 1 [4294691.701000] input: PS/2 Logitech Mouse as /class/input/input1 [4294692.005000] Real Time Clock Driver v1.12 [4294692.129000] input: PC Speaker as /class/input/input2 [4294692.157000] parport: PnPBIOS parport detected. [4294692.157000] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [4294692.177000] Floppy drive(s): fd0 is 1.44M [4294692.193000] FDC 0 is a post-1991 82077 [4294692.592000] Driver for 1-wire Dallas network protocol. [4294692.641000] matrox_w1 0000:01:00.0: Matrox G400 GPIO transport layer for 1-wire. [4294692.714000] ide-floppy driver 0.99.newide [4294692.781000] hdb: No disk in drive [4294692.802000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 [4294692.803000] PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 1 [4294692.803000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [4294692.882000] hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm [4294693.163000] ts: Compaq touchscreen protocol output [4294693.672000] hdb: No disk in drive [4294695.275000] eth0: link down [4294695.615000] hdb: No disk in drive [4294696.556000] NET: Registered protocol family 17 [4294696.946000] lp0: using parport0 (interrupt-driven). [4294697.170000] Adding 136512k swap on /dev/hda6. Priority:-1 extents:1 across:136512k [4294698.620000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294698.620000] md: bitmap version 4.39 [4294700.421000] hdb: No disk in drive [4294700.474000] cdrom: open failed. [4294700.775000] cdrom: open failed. [4294700.777000] cdrom: open failed. [4294702.703000] FAT: Unrecognized mount option "utf8" or missing value [4294710.393000] ACPI: Power Button (FF) [PWRF] [4294710.393000] ACPI: Power Button (CM) [PWRB] [4294710.393000] ACPI: Sleep Button (CM) [SLPB] [4294710.645000] ibm_acpi: ec object not found [4294710.696000] pcc_acpi: loading... [4294711.475000] powernow: No powernow capabilities detected [4294717.950000] ppdev: user-space parallel port driver [4294718.467000] apm: BIOS not found. [4294720.300000] [drm] Initialized drm 1.0.1 20051102 [4294720.316000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201 [4294720.320000] [drm] Initialized mga 3.2.1 20051102 on minor 0 [4294720.322000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [4294720.322000] agpgart: Device is in legacy mode, falling back to 2.x [4294720.322000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [4294720.323000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [4294866.904000] NET: Registered protocol family 10 [4294866.904000] lo: Disabled Privacy Extensions [4294866.904000] ADDRCONF(NETDEV_UP): eth0: link is not ready [4294866.905000] IPv6 over IPv4 tunneling driver [4295592.401000] No module found in object [4295597.079000] Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi [4295597.079000] mga_vid: Found MGA G400/G450 at 0000:01:00.0 [4295597.079000] mga_vid: MMIO at 0xe0b78000 framebuffer: 0xDC000000 [4295597.079000] mga_vid: OPTION word: 0x50044120 mem: 0x10 SGRAM [4295597.079000] mga_vid: Detected 16MB card reporting 32 MB RAMSIZE, overriding [4295597.079000] mga_vid: detected RAMSIZE is 16 MB [4295597.079000] mga_vid: 1 supported cards found [4295597.079000] mga_vid: using major: 83 (assigned or default!) [4295726.501000] mga_vid: Cleaning up module [4295728.843000] Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi [4295728.843000] mga_vid: Found MGA G400/G450 at 0000:01:00.0 [4295728.843000] mga_vid: MMIO at 0xe0b78000 framebuffer: 0xDC000000 [4295728.843000] mga_vid: OPTION word: 0x50044120 mem: 0x10 SGRAM [4295728.843000] mga_vid: Detected 16MB card reporting 32 MB RAMSIZE, overriding [4295728.843000] mga_vid: detected RAMSIZE is 16 MB [4295728.843000] mga_vid: 1 supported cards found [4295728.843000] mga_vid: using major: 83 (assigned or default!) [4296052.999000] mga_vid: Cleaning up module [4296080.027000] Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi [4296080.027000] mga_vid: Found MGA G400/G450 at 0000:01:00.0 [4296080.027000] mga_vid: MMIO at 0xe0b78000 framebuffer: 0xDC000000 [4296080.027000] mga_vid: OPTION word: 0x50044120 mem: 0x10 SGRAM [4296080.027000] mga_vid: Detected 16MB card reporting 32 MB RAMSIZE, overriding [4296080.027000] mga_vid: detected RAMSIZE is 16 MB [4296080.027000] mga_vid: 1 supported cards found [4296080.027000] mga_vid: using major: 83 (assigned or default!) [4296256.582000] mga_vid: Cleaning up module [4296278.553000] Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi [4296278.553000] mga_vid: Found MGA G400/G450 at 0000:01:00.0 [0000:01:00.0] [4296278.553000] mga_vid: MMIO at 0xe0b78000 framebuffer: 0xDC000000 [4296278.553000] mga_vid: OPTION word: 0x50044120 mem: 0x10 SGRAM [4296278.553000] mga_vid: Detected 16MB card reporting 32 MB RAMSIZE, overriding [4296278.553000] mga_vid: detected RAMSIZE is 16 MB [4296278.553000] mga_vid: 1 supported cards found [4296278.554000] mga_vid: using major: 83 (assigned or default!) [4296330.239000] mga_vid: Cleaning up module [4296338.539000] Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi [4296338.539000] mga_vid: Found MGA G400/G450 at 0000:01:00.0 [4296338.539000] mga_vid: MMIO at 0xe0b78000 framebuffer: 0xDC000000 [4296338.539000] mga_vid: OPTION word: 0x50044120 mem: 0x10 SGRAM [4296338.539000] mga_vid: Detected 16MB card reporting 32 MB RAMSIZE, overriding [4296338.540000] mga_vid: detected RAMSIZE is 16 MB [4296338.540000] mga_vid: 1 supported cards found [4296338.540000] mga_vid: using major: 83 (assigned or default!)