Three Patches for Ogle 0.9.2

--- ogle-0.9.2/libogleao/alsa_audio.c	2003-10-18 17:38:30.000000000 -0700
+++ ogle-0.9.2-patch/libogleao/alsa_audio.c	2005-04-22 18:21:23.000000000 -0700
@@ -248,10 +248,9 @@
       //Shouldn't ctl_handle be closed here?
     }
     
-    snd_ctl_close(ctl_handle);
-  
-  __diga_end:
+    snd_ctl_close(ctl_handle);  
   }
+  __diga_end:
   
   return 0;
 }

--- ogle-0.9.2/configure.in	2003-11-04 03:18:41.000000000 -0800
+++ ogle-0.9.2-patch/configure.in	2005-04-22 18:39:56.000000000 -0700
@@ -724,7 +724,7 @@
 dnl what about k6 / athlon
 dnl will it still assemble the mmx instructions when -march=i386
 dnl	  CFLAGS="$CFLAGS -march=$host_cpu"
-	  XCFLAGS="$CFLAGS -march=i586 -mcpu=pentiumpro"
+	  XCFLAGS="$CFLAGS -march=i586 -mtune=pentiumpro"
 	fi
 	USE_MMX=yes
 	;;

--- ogle-0.9.2/mpeg2_video/video_output_x11.c	2003-11-04 04:02:10.000000000 -0800
+++ ogle-0.9.2-patch/mpeg2_video/video_output_x11.c	2005-04-22 18:37:56.000000000 -0700
@@ -286,6 +286,7 @@
   }
 }
 
+
 /* This section of the code looks for the Xv extension for hardware
  * yuv->rgb and scaling. If it is not found, or any suitable adapter
  * is not found, use_xv will be set to 0. Otherwise it allocates a
@@ -299,121 +300,136 @@
 {
   int xv_found = 0;
 #ifdef HAVE_XV
-  int i, j;
+  int i, j, k;
   int result;
 
   xv_port = 0; /* We have no port yet. */
-  
+
   /* Check for the Xvideo extension */
-  result = XvQueryExtension(mydisplay, &xv_version, &xv_release, 
-			    &xv_request_base, &xv_event_base, 
+  result = XvQueryExtension(mydisplay, &xv_version, &xv_release,
+			    &xv_request_base, &xv_event_base,
 			    &xv_error_base);
   if(result != Success) {
     WARNING("%s", "Xvideo extension not found\n");
     use_xv = 0;
     return;
   }
-  
+
   NOTE("Found Xv extension %d.%d, checking for suitable adaptors\n",
        xv_version, xv_release);
-  
+
   /* Check for available adaptors */
-  result = XvQueryAdaptors(mydisplay, DefaultRootWindow (mydisplay), 
+  result = XvQueryAdaptors(mydisplay, DefaultRootWindow (mydisplay),
 			   &xv_num_adaptors, &xv_adaptor_info);
   if(result != Success) {
     WARNING("%s", "No Xv adaptors found\n");
     use_xv = 0;
     return;
   }
-      
+
   /* Check adaptors */
   for(i = 0; i < xv_num_adaptors; i++) {
-    
+
     /* Is it usable for displaying XvImages */
     if(!(xv_adaptor_info[i].type & XvInputMask) ||
        !(xv_adaptor_info[i].type & XvImageMask))
       continue;
-    
-    xv_port = xv_adaptor_info[i].base_id;
-      
-    /* Check image formats of adaptor */
-    xv_formats = XvListImageFormats(mydisplay, xv_port, &xv_num_formats);
-    for(j = 0; j < xv_num_formats; j++) {
-      if(xv_formats[j].id == 0x32315659) { /* YV12 */
-	//if(xv_formats[j].id == 0x30323449) { /* I420 */
-	xv_id = xv_formats[j].id;
-	break;
-      } 
-    }
-    /* No matching format found */
-    if(j == xv_num_formats)
-      continue;
-      
-    NOTE("Xv adaptor \"%s\" port %li image format %i\n",
-	 xv_adaptor_info[i].name, xv_port, xv_id);
-      
-    /* Allocate XvImages */
+
+		/* Check Available Ports */
+		for (j = 0; j <  xv_adaptor_info[i].num_ports && !xv_port ; j++) {
+			
+			/* Check Image formats of adaptor */
+			xv_formats = XvListImageFormats(mydisplay,xv_adaptor_info[i].base_id + j, &xv_num_formats); 
+			for (k = 0; k < xv_num_formats; k ++) {
+				
+				/* Check for proper format (YV12) and see if we can grab the port */			
+				if ( (xv_formats[k].id == 0x32315659) && (XvGrabPort(mydisplay,xv_adaptor_info[i].base_id + j,0) == Success) ) { 
+					xv_id = xv_formats[k].id;
+					xv_port = xv_adaptor_info[i].base_id +  j;
+					break;
+					}
+				
+				}
+
+			/* delete stuff nicely */
+			XFree(xv_formats);	
+			}
+		
+		/* Check next Adapter */
+		if (xv_port==0) continue;		
+				
+		/* Report what we found */							
+    NOTE("Xv adaptor \"%s\" port %li image format %i\n", xv_adaptor_info[i].name, xv_port, xv_id);
+			
+		/* Allocate XvImage */
     xv_image = XvShmCreateImage(mydisplay, xv_port, xv_id, NULL,
 				padded_width,
-				padded_height, 
+				padded_height,
 				&shm_info);
-    
-    /* Got an Image? */
+
+    /* Got an milk? */
     if(xv_image == NULL)
       continue;
-    
+		
     /* Test and see if we really got padded_width x padded_height */
     if(xv_image->width != padded_width ||
        xv_image->height != padded_height) {
       FATAL("XvShmCreateImage got size: %d x %d\n",
 	    xv_image->width, xv_image->height);
       exit(1);
-    }
-    
+    	}
+		
+		/* Now Finish Up */
     shm_info.shmid = picture_buffer_shmid;
     shm_info.shmaddr = picture_buffer_addr;
-    
-    /* Set the data pointer to the decoders picture segment. */  
+
+    /* Set the data pointer to the decoders picture segment. */
     //    xv_image->data = picture_data->y;
     shm_info.readOnly = True;
-    
+
     /* make sure we don't have any unhandled errors */
     XSync(mydisplay, False);
-    
+
     /* set error handler so we can check if xshmattach failed */
     prev_xerrhandler = XSetErrorHandler(xshm_errorhandler);
-    
+
     /* get the serial of the xshmattach request */
     req_serial = NextRequest(mydisplay);
-    
+
     /* try to attach */
     XShmAttach(mydisplay, &shm_info);
-    
+
     /* make sure xshmattach has been processed and any errors
        have been returned to us */
     XSync(mydisplay, False);
-    
+
     /* revert to the previous xerrorhandler */
     XSetErrorHandler(prev_xerrhandler);
-    
+
     if(use_xshm) {
 #if 0
       shmctl(shm_info.shmid, IPC_RMID, 0); // only works on Linux..
 #endif
-      
+
       CompletionType = XShmGetEventBase(mydisplay) + ShmCompletion;
     }
     xv_found = 1;
 
     /* All set up! */
     break;
-  }
+		}
+	
+	/* Clean up */
+	XvFreeAdaptorInfo(xv_adaptor_info);
+
 #endif /* HAVE_XV */
+	/* In case we didn't find a working Xv */ 
   if(!xv_found) {
     use_xv = 0;
-  }
-}
-     
+	  }
+	
+	}
+
 
 /* This section of the code tries to use the MIT XShm extension for 
  * accellerated transfers to to X. XShm extension is need and only
@@ -1726,6 +1742,8 @@
 
   if(mydisplay) {
     XSync(mydisplay,True);
+    if (use_xv) 
+      XvUngrabPort(mydisplay,xv_port,CurrentTime);
     if(use_xshm)
       XShmDetach(mydisplay, &shm_info);
     if(window.ximage != 0)