Ogle 9.2 not working Mandrake 9.0

I have been using the alsa rpm version of Ogle 9.1 with mandrake 9.0 and I have been very impressed with its' abilty to play DVDs and I am very grateful for you and your co-developers for developing such an excellent program.

I have had a few gltches with some DVDs and I used the rpm for Ogle and Ogle -gui to upgrade to Ogle 9.2.  Unfortunately 9.2 does not work - on loading a disc the video window displays and then Ogle terminates.  I started it from a terminal with 'ogle --debug' and this is what was printed-

Any advice ?

James Vincent

[james@Boffin ogle9.2]$ ogle --debug
Build: Linux 2.4.20-2.54 #1 Sat Feb 22 08:27:12 EST 2003 i686 unknown Tue Nov  4 14:44:50 CET 2003
mmx Xv oss alsa
Runtime: Linux 2.4.20 #37 Mon Nov 24 21:29:50 GMT 2003 i686 unknown
cpuinfo:
processor : 0, vendor_id : AuthenticAMD, cpu family : 6, model : 6, model name : AMD Athlon(tm) XP
2000+, stepping : 2, cpu MHz : 1659.642, cache size : 256 KB, fdiv_bug : no, hlt_bug : no, f00f_bug
 : no, coma_bug : no, fpu : yes, fpu_exception : yes, cpuid level : 1, wp : yes, flags : fpu vme de
 tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow, bo
gomips : 3316.12, ,

/dev/dvd -> /dev/cdroms/cdrom0
/dev/cdroms/cdrom0 -> ../scsi/host0/bus0/target0/lun0/cd
Valid DVD devices: /dev/sr0
/dev/hdc is running ide-scsi (JLMS DVD-ROM LTD-166S)
 ** block device is missing: hdc **
 This may be because you are running devfs,
 in this case to turn on/off dma with hdparm
 you should use the corresponding ide device node
 /dev/ide/hostX/busY/targetZ/lun0/generic,
 where you set X,Y,Z to the apropriate numbers.
 /dev/hdb would be: /dev/ide/host0/bus0/target1/lun0/generic
 hdc: /dev/ide/host0/bus1/target0/...
 hdd: /dev/ide/host0/bus1/target1/...
WARNING: Cannot read /proc/ide/hdc/settings, need to be root to do that?
/dev/hdd is running ide-scsi (LITE-ON LTR-48246S)
 ** block device is missing: hdd **
 This may be because you are running devfs,
 in this case to turn on/off dma with hdparm
 you should use the corresponding ide device node
 /dev/ide/hostX/busY/targetZ/lun0/generic,
 where you set X,Y,Z to the apropriate numbers.
 /dev/hdb would be: /dev/ide/host0/bus0/target1/lun0/generic
 hdc: /dev/ide/host0/bus1/target0/...
 hdd: /dev/ide/host0/bus1/target1/...
WARNING: Cannot read /proc/ide/hdd/settings, need to be root to d
hdparm v5.2
WARNING: Cannot read /dev/hdc, need to be root to do that?
WARNING: Could not get DMA state for /dev/hdc
WARNING: Cannot read /dev/hdd, need to be root to do that?
WARNING: Could not get DMA state for /dev/hdd
Note[ogle_ctrl]: ogle 0.9.2
Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_gui with pid 3516
WARNING[dvd_gui]: add_keybinding(): No such action: 'SaveScreensh
WARNING[dvd_gui]: add_keybinding(): No such action: 'SaveScreensh
Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_nav with pid 3517
Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_mpeg_ps with pid 351
Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_vout with pid 3519
Debug[ogle_vout]: CLK_TCK: 100
Debug[ogle_nav]: Opening DVD at "/dev/dvd"
libdvdread: Using libdvdcss version 1.2.7 for DVD access
libdvdcss debug: opening target `/dev/dvd'
libdvdcss debug: using libc for access
libdvdcss debug: disc is unscrambled
libdvdcss debug: using CSS key cache dir: /home/james/.dvdcss/COG#2003032416054145/
Debug[ogle_nav]: play_PGC: first_play_pgc
Debug[ogle_nav]: play_PGC: state.pgcN (1)
Debug[ogle_nav]: play_PG: state.pgN (1)
Debug[ogle_nav]: play_Cell: state.cellN (1)
Debug[ogle_nav]: sending audio demuxstream 0
Debug[ogle_nav]: oid: bd, ost: 80, nid: bd, nst: a0
Debug[ogle_nav]: sending subp demuxstream 31
Debug[ogle_mpeg_ps]: newid private:
Debug[ogle_mpeg_ps]: oldid private
libdvdread: Using libdvdcss version 1.2.7 for DVD access
libdvdcss debug: opening target `/dev/dvd'
libdvdcss debug: using libc for access
libdvdcss debug: disc is unscrambled
libdvdcss debug: using CSS key cache dir: /home/james/.dvdcss/COG#2003032416054145/

libdvdread: Attempting to retrieve all CSS keys
libdvdread: This can take a _long_ time, please be patient

libdvdread: Get key for /VIDEO_TS/VIDEO_TS.VOB at 0x00000196
libdvdread: Elapsed time 0
libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x0000bad2
libdvdread: Elapsed time 0
libdvdread: Found 1 VTS's
libdvdread: Elapsed time 0
Debug[ogle_ctrl]: _new stream bf, 0
Debug[ogle_ctrl]: _new stream e0, 0
Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_mpeg_vs with pid 3540
Debug[ogle_mpeg_vs]: Using MMX accelerated media functions
Debug[ogle_mpeg_vs]: ## req cap
Debug[ogle_ctrl]: _new stream bd, a0
Debug[ogle_mpeg_vs]: got cap and stream
Debug[ogle_mpeg_vs]: get ouput buffer
Debug[ogle_ctrl]: Started /usr/lib/ogle/ogle_audio with pid 3541
Debug[ogle_ctrl]: got capability video_out
Debug[ogle_mpeg_vs]: horizontal_size: 720, vertical_size: 576
Debug[ogle_mpeg_vs]: padded_width: 720, padded_height: 576
Debug[ogle_mpeg_vs]: frame rate: 25
Debug[ogle_mpeg_vs]: time offset not valid yet
Debug[ogle_mpeg_vs]: time offset not valid yet
Debug[ogle_ctrl]: child: 3541 killed (/usr/lib/ogle/ogle_audio)
Debug[ogle_ctrl]: pid: 3541 terminated on signal: 8 (/usr/lib/ogle/ogle_audio)
Debug[ogle_ctrl]: child: 3516 killed (/usr/lib/ogle/ogle_gui)
Debug[ogle_ctrl]: pid: 3516 terminated on signal: 2 (/usr/lib/ogle/ogle_gui)
Debug[ogle_ctrl]: child: 3540 exited with 0 (/usr/lib/ogle/ogle_mpeg_vs)
Debug[ogle_ctrl]: pid: 3540 exited with status: 0 (/usr/lib/ogle/ogle_mpeg_vs)
Debug[ogle_vout]: Got weird data from xscreensaver-command:""
Debug[ogle_vout]: set_sync_point()
Note[ogle_vout]: using default config for ':0.0'
Note[ogle_vout]: Using 'X11' as source for geometry
Note[ogle_vout]: Xinerama extension not found/active
Note[ogle_vout]: Using 'XF86VidMode' as source for resolution
Note[ogle_vout]: Display w: 347, h: 260, hp: 1024, vp: 768
Note[ogle_vout]: Display sar: 266240/266496 = 0.999039
Note[ogle_vout]: Found 8 matching visuals, using visual id: 23
Debug[ogle_ctrl]: child: 3518 killed (/usr/lib/ogle/ogle_mpeg_ps)
Debug[ogle_ctrl]: pid: 3518 terminated on signal: 2 (/usr/lib/ogle/ogle_mpeg_ps)
Note[ogle_vout]: Found Xv extension 2.2, checking for suitable adaptors
Note[ogle_vout]: Xv adaptor "ATI Radeon Video Overlay" port 67 image format 842094169
Debug[ogle_vout]: resize: 767, 576
Debug[ogle_ctrl]: child: 3519 exited with 0 (/usr/lib/ogle/ogle_vout)
Debug[ogle_ctrl]: pid: 3519 exited with status: 0 (/usr/lib/ogle/ogle_vout)
Debug[ogle_ctrl]: slaying child: 3517 /usr/lib/ogle/ogle_nav
Debug[ogle_ctrl]: removing shmid: 3833866
Debug[ogle_ctrl]: removing shmid: 4653068
Debug[ogle_ctrl]: removing shmid: 4685837
Debug[ogle_ctrl]: removing shmid: 4718606
Debug[ogle_ctrl]: removing shmid: 4751375
ctrl: ipc_rmid: Invalid argument
Debug[ogle_ctrl]: removing shmid: 4784144
Debug[ogle_ctrl]: removing shmid: 4816913
Note[ogle_ctrl]: exiting