Re: pyilmbase problems importing imath

Yes, let's take a look at that.


On Thursday, February 13, 2014, Federico Naum <[email protected]> wrote:

>  Thanks Piotr,
>
> That confirms that I have something else wrong..
> I tried also with gcc446, and both gcc combination with pyilmbase 2.0.1
> against version 2.1.0 of ilmbase and I still have the same issue.
>
> Regarding what Nick pointed out about the visibility on linux, but It
>
> #else   // linux/macos
> #  if defined(PLATFORM_VISIBILITY_AVAILABLE)
> #    define IEX_EXPORT_DEFINITION __attribute__((visibility("default")))
> #    define IEX_IMPORT_DEFINITION
> #  else
> #    define IEX_EXPORT_DEFINITION
> #    define IEX_IMPORT_DEFINITION
>
> I don't see the -fvisibility=hidden flag passed into the compiled lines,so I assume that all symbols are by defualt, I try defining
> PLATFORM_VISIBILITY_AVAILABLE but I see no change...
>
> and I can see the symbols are visible . i.e
>
> >* nm -CS libIex-2_1.so.11 | grep BaseExc*
> 0000000000015df0 0000000000000275 T
> Iex_2_1::BaseExc::append(std::basic_stringstream<char,
> std::char_traits<char>, std::allocator<char> >&)
> 0000000000015430 00000000000000af T
> Iex_2_1::BaseExc::assign(std::basic_stringstream<char,
> std::char_traits<char>, std::allocator<char> >&)
> 0000000000015850 00000000000000e2 T Iex_2_1::BaseExc::BaseExc(char const*)
> 0000000000015c70 00000000000000ba T
> Iex_2_1::BaseExc::BaseExc(Iex_2_1::BaseExc const&)
> 00000000000156b0 00000000000000ce T Iex_2_1::BaseExc::BaseExc(std::string
> const&)
> 0000000000015350 00000000000000d7 T
> Iex_2_1::BaseExc::BaseExc(std::basic_stringstream<char,
> std::char_traits<char>, std::allocator<char> >&)
> 00000000000154e0 00000000000000e2 T Iex_2_1::BaseExc::BaseExc(char const*)
> 0000000000015d30 00000000000000ba T
> Iex_2_1::BaseExc::BaseExc(Iex_2_1::BaseExc const&)
> 0000000000015780 00000000000000ce T Iex_2_1::BaseExc::BaseExc(std::string
> const&)
> 00000000000155d0 00000000000000d7 T
> Iex_2_1::BaseExc::BaseExc(std::basic_stringstream<char,
> std::char_traits<char>, std::allocator<char> >&)
> 0000000000015940 0000000000000110 T Iex_2_1::BaseExc::~BaseExc()
> 0000000000015a50 0000000000000108 T Iex_2_1::BaseExc::~BaseExc()
> 0000000000015b60 0000000000000108 T Iex_2_1::BaseExc::~BaseExc()
> 0000000000015340 0000000000000005 T Iex_2_1::BaseExc::what() const
> 000000000021cd80 0000000000000038 V typeinfo for Iex_2_1::BaseExc
> 00000000000172e0 0000000000000013 V typeinfo name for Iex_2_1::BaseExc
> 000000000021cd40 0000000000000028 V vtable for Iex_2_1::BaseExc
>
> > *nm -CS libIex-2_1.so.11 | grep throwErrnoExc*
> 0000000000013420 0000000000000014 T Iex_2_1::throwErrnoExc(std::string
> const&)
> 0000000000011730 0000000000001ce2 T Iex_2_1::throwErrnoExc(std::string
> const&, int)
> 0000000000013440 00000000000000b2 T Iex_2_1::throwErrnoExc()
>
>
> so not sure what to try.... I'll grab something else tomorrow to continue
> with the investigation.
> would it help if I post the output of the configure of both ilmase and
> pyilmbase? maybe you can spot something that I am missing
> F
>
>
> On 13/02/14 13:41, Piotr Stanczyk wrote:
>
> I see, thanks for the qualification. I have built with gcc4.4.6 all the
> way up to 4.7.x so not sure that is the issue.  I think boost 1.5.1 is good
> for the later releases, certainly 2.x, but again, we built 1.x versions
> with 1.39 for quite a few years without any issues.
>
>  I'm not sure why you would be seeing this linux as is...
>
> Piotr
>
>
> On 12 February 2014 15:32, Federico Naum <[email protected]> wrote:
>
>  Hi Piotr,
>
> I think this is more related to what Nick is pointing out (but I'm on
> Linux not in Windows)
>
> Regarding the lines with NAMESPACE that I put in the post, I  mix them,
> but just to stress that I'm seeing the same problem either with version 1.X
> and version 2.X of both ilmbase and pylmbase
>
> On verison 1.X there was no namespaces code around that piece of code and
> I'm still seeing the same issue. (crash in the same line)
> But, I don't know what to try, so I'll give it a go to ilmbase 2.1.0, and
> I'll report back
>
> Thanks
> Fede
>
>
>
> On 13/02/14 05:33, Piotr Stanczyk wrote:
>
> Hey -
>
>  How did you build IlmBase? Pre- 2.1.0 releases had a bug when building
> with custom namespaces
>
>  Piotr
>
>
>
> On 11 February 2014 23:50, Federico Naum <[email protected]> wrote:
>
>  Hi
>
> Hope this is the forum to ask.
>
> I'm building pyilmbase 1.0.0  under llinux Centos 6.2, with ilmbase
> 1.0.3,  gcc4.1.2 and boost 1.44.0 (also tried all combinations of the newer
> version of pyilmbase 2.0.0/1 against ilmbase 2.0 with newer compiler
> gcc446, and several flavours boost.
>
> In all cases I can build  successfully and import *iex *just fine, but
> importing *imath* does SegFault, it does crashed on line 241 of PyIex.h
>
> 240│     const TypeTranslator<IEX_NAMESPACE::BaseExc>::ClassDesc *baseDesc
> = baseExcTranslator().template
> findClassDesc<ExcBase>(baseExcTranslator().firstClassDesc());
> *241├>    std::string baseName = baseDesc->typeName();*
> 242│     std::string baseModule = baseDesc->moduleName();
>
> *baseDesc* ends up with a nullPointer (const
> PyIex::TypeTranslator<Iex_2_0::BaseExc>::ClassDesc *) 0x0
>
>
> As importing *iex* works
>
>

_______________________________________________
Openexr-devel mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/openexr-devel