Re: CSB535FS & PICOGUI & TOUCHSCREEN

hi,

Arantxa wrote:
> Hi again,
> =

>> doesn't the ts-controller give some kind of mouse emulation?
> =

> What we have is the driver for the touchscreen and what we need is the
> touchscreen controller for the picogui.

ok, got that.
link your ts-drivers devicefile to /dev/mouse.
afair, picogui can work with standard mouse-drivers.

or am i missing something?

markus

> Thanks.
> =

> -----Mensaje original-----
> De: Markus Schorer [mailto:[email protected]] =

> Enviado el: martes, 15 de mayo de 2007 8:34
> Para: Arantxa
> Asunto: Re: [Pgui-devel] CSB535FS & PICOGUI & TOUCHSCREEN
> =

> hi again,
> =

> Arantxa wrote:
>> ... =

> =

> ok. it's about the touchscreen.
> =

>> What I'm looking for is a driver for the picogui that allows me to use t=
he
>> touchscreen, because the drivers from the picogui version 0.45 don't all=
ow
>> me to do it.
> =

> what do you mean by "allow"? doesn't the ts-controller give some kind of =

> mouse emulation?
> =

> markus
> =

>> Thanks.
>>
>>
>> -----Mensaje original-----
>> De: [email protected]
>> [mailto:[email protected]] En nombre de Markus
>> Schorer
>> Enviado el: lunes, 14 de mayo de 2007 8:14
>> Para: [email protected]
>> Asunto: Re: [Pgui-devel] CSB535FS & PICOGUI & TOUCHSCREEN
>>
>> hi,
>>
>> as you might have already guessed, the mailing list is kind of dead ...
>> as is picogui development..
>>
>> regarding your problem:
>> - what are you looking for? a driver for the lcd or the touch-screen? to =

>> me, it doesn't really get clear from your mail.
>> - what kind of kernel driver do you have? framebuffer or "special"?
>> - how is your lcd connected/integrated to/in the board? can you provide =

>> a technical description or a link for the product?
>>
>> afair, there is a fb-driver for picogui being able to use any fb-device.
>> other possibility is to write a picogui driver using the kenrel =

>> interface you seem to have ...
>>
>> markus
>>
>> Arantxa wrote:
>>> Hello, we are working with a kit called csb535fs and it has an LCD =

>>> ADS7846E 4-Wire Touch Controller
>>>
>>> and its microprocessor is an ARM.
>>>
>>>  =

>>>
>>> The problem that we have is that we want to work with the LCD
>>>
>>> using the touchscreen and we have no driver for our LCD in picogui.
>>>
>>> We have the driver for the kernel but not the driver for communication =

>>> between the picogui
>>>
>>> and the kernel. So what we need is a driver for picogui.
>>>
>>>  =

>>>
>>> I would like to know if a compatible driver or  a specific driver exist=
s =

>>> for this LCD.
>>>
>>> Thanks in advance.
>>>
>>>  =

>>>
>>>  =

>>>
>>>  =

>>>
>>>  =

>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> -----------------------------------------------------------------------=
--
>>> This SF.net email is sponsored by DB2 Express
>>> Download DB2 Express C - the FREE version of DB2 express and take
>>> control of your XML. No limits. Just data. Click to get it now.
>>> http://sourceforge.net/powerbar/db2/
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Pgui-devel mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/pgui-devel
>>
> =

> =



-- =

_______________________________________________________________________
plain GmbH        | daiserstrasse 15      | 81371 m=FCnchen
fon 089.540.149.0 | fax 089.540.149.44    | http://www.plain.de

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/