Re: encoding a single audio track from the dvd, but not the first !

Giulio Fidente wrote:
> hi all there,

[...]

> but I'm having a problem now when trying to encode audio data from a dvd 
> ... here is the output of tcprobe:
> 
> $ tcprobe -i /dev/dvd
> libdvdread: Using libdvdcss version 1.2.10 for DVD access
> libdvdread: Using libdvdcss version 1.2.10 for DVD access
> [dvd_reader.c] mpeg2 ntsc 16:9 only letterboxed U0 720x480 video
> [dvd_reader.c] ac3 en drc 48kHz 6Ch
> [dvd_reader.c] ac3 en drc 48kHz 2Ch
> [dvd_reader.c] DVD title 1/5: 14 chapter(s), 1 angle(s), title set 1
> [dvd_reader.c] title playback time: 01:07:44.00  4065 sec
> [tcprobe] DVD image/device
> [tcprobe] summary for /dev/dvd, (*) = not default, 0 = not detected
> import frame size: -g 720x480 [720x576] (*)
>      aspect ratio: 16:9 (*)
>        frame rate: -f 23.976 [25.000] frc=1 (*)
>       audio track: -a 0 [0] -e 48000,16,2 [48000,16,2] -n 0x2000 [0x2000]
>       audio track: -a 1 [0] -e 48000,16,2 [48000,16,2] -n 0x2000 [0x2000]
> V: 97463 frames, 4065 sec @ 23.976 fps
> A: 62.03 MB @ 128 kbps
> USER CDSIZE:  650 MB | V:  -62.0 MB @ -15999.8 kbps
> USER CDSIZE:  700 MB | V:  -62.0 MB @ -15999.8 kbps
> USER CDSIZE: 1300 MB | V:  -62.0 MB @ -15999.7 kbps
> USER CDSIZE: 1400 MB | V:  -62.0 MB @ -15999.7 kbps
> $

[...]

> tccat -T 1,1,1 -i "/dev/dvd" -t dvd -d 0 | tcdemux -a 1,0 -x pcm -S 0 -M 
> 2 -d 0 | tcextract -t vob -x pcm -a 1,0 -d 0 > track1.pcm

I was bloodly wrong, the following worked perfectly:

transcode -i /dev/dvd -x dvd -T 1,1,1 -a 1 -y null,tcaud -N 0x1 -m 
track1.pcm

sorry about that, it was my first email to the list :p