Help with Hauppauge HVR950Q

I'm on ubuntu 9.04 / tvtime: Installed: 1.0.2-1


Any pointers on setting up this tuner?  tvtime is looking for
/dev/video0, but this tuner does not seem to create the device.

I do get these device files:

$ ls -l /dev/dvb/adapter0/
total 0
crw-rw----+ 1 root video 212, 4 2009-05-28 15:53 demux0
crw-rw----+ 1 root video 212, 5 2009-05-28 15:53 dvr0
crw-rw----+ 1 root video 212, 3 2009-05-28 15:53 frontend0
crw-rw----+ 1 root video 212, 7 2009-05-28 15:53 net0

My user does belong to the "video" group.

$ groups | grep -q video && echo "found"
found


I did install firmware for this card:

$ ls -l /lib/firmware/dvb-fe-xc5000-1.1.fw
-rw-r--r-- 1 root root 12332 2009-05-28 15:01 /lib/firmware/dvb-fe-xc5000-1.1.fw


I apologize for my inexperience with Linux TV.

Thanks.


Here's syslog output:

May 28 15:53:11 bumby2 kernel: [1142883.276513] usb 2-2: new high speed USB device using ehci_hcd and address 11
May 28 15:53:11 bumby2 kernel: [1142883.430676] usb 2-2: configuration #1 chosen from 1 choice
May 28 15:53:11 bumby2 kernel: [1142883.788053] au0828: i2c bus registered
May 28 15:53:11 bumby2 kernel: [1142883.886234] tveeprom 3-0050: Hauppauge model 72101, rev B3F0, serial# 5345502
May 28 15:53:11 bumby2 kernel: [1142883.886238] tveeprom 3-0050: MAC address is 00-0D-FE-51-90-DE
May 28 15:53:11 bumby2 kernel: [1142883.886240] tveeprom 3-0050: tuner model is Xceive XC5000 (idx 150, type 4)
May 28 15:53:11 bumby2 kernel: [1142883.886243] tveeprom 3-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
May 28 15:53:11 bumby2 kernel: [1142883.886246] tveeprom 3-0050: audio processor is AU8522 (idx 44)
May 28 15:53:11 bumby2 kernel: [1142883.886248] tveeprom 3-0050: decoder processor is AU8522 (idx 42)
May 28 15:53:11 bumby2 kernel: [1142883.886250] tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter
May 28 15:53:11 bumby2 kernel: [1142883.886253] hauppauge_eeprom: warning: unknown hauppauge model #72101
May 28 15:53:11 bumby2 kernel: [1142883.886255] hauppauge_eeprom: hauppauge eeprom: model=72101
May 28 15:53:11 bumby2 kernel: [1142883.892296] xc5000 3-0061: creating new instance
May 28 15:53:11 bumby2 kernel: [1142883.894481] xc5000: Successfully identified at address 0x61
May 28 15:53:11 bumby2 kernel: [1142883.894483] xc5000: Firmware has not been loaded previously
May 28 15:53:11 bumby2 kernel: [1142883.894486] DVB: registering new adapter (au0828)
May 28 15:53:11 bumby2 kernel: [1142883.894489] DVB: registering adapter 0 frontend 1491712 (Auvitek AU8522 QAM/8VSB Frontend)...
May 28 15:53:11 bumby2 kernel: [1142883.894800] Registered device AU0828 [Hauppauge HVR950Q]
May 28 15:53:12 bumby2 pulseaudio[16589]: alsa-util.c: Device front:1 doesn't support 44100 Hz, changed to 48000 Hz.
May 28 15:53:12 bumby2 pulseaudio[16589]: alsa-util.c: Cannot find fallback mixer control "Mic" or mixer control is no combination of switch/volume.


-- 
Bill Moseley.
[email protected]
Sent from my iMutt

------------------------------------------------------------------------------
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT 
is a gathering of tech-side developers & brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing, & 
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian 
Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com