[ tvtime-Bugs-2949475 ] opens and closes quickly
"SourceForge.net" <[email protected]>
| Newsgroups | gmane.comp.video.tvtime.devel |
|---|---|
| Message-ID | <[email protected]> |
Bugs item #2949475, was opened at 2010-02-10 20:22 Message generated for change (Comment added) made by ken-23434 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=506987&aid=2949475&group_id=64301 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Confusing behavior Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: opens and closes quickly Initial Comment: I can't get tvtime to open. I changed a setting on tvtime and it closed when I try to re open it it closes again. I tried taking the program off and downloading it again. I am very new to ubuntu and an not sure how to make this tvtime program work. The program was working very well and I was looking through the setting when it shut down. Any help would be greatly appreicated ---------------------------------------------------------------------- Comment By: ken_23434 (ken-23434) Date: 2010-05-13 19:25 Message: I am having the same problem. Here is the output from tvtime -v Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/ken/.tvtime/tvtime.xml cpuinfo: CPU AMD Sempron(tm) 2200+, family 6, model 8, stepping 1. cpuinfo: CPU measured at 1833.312MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 10706000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1280x1024. xcommon: Have XTest, will use it to ping the screensaver. xcommon: Pixel aspect ratio 1:1. xcommon: Pixel aspect ratio 1:1. xcommon: Window manager is compiz and is EWMH compliant. xcommon: Using EWMH state fullscreen property. xcommon: Using EWMH state above property. xcommon: Using EWMH state below property. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. xvoutput: Using XVIDEO adaptor 312: NV17 Video Texture. speedycode: Using MMXEXT optimized functions. station: Adding frequency table us-cable100, all channels active videoinput: Using video4linux2 driver 'ivtv', card 'Hauppauge WinTV PVR-150' (bus PCI:0000:00:0d.0). videoinput: Version is 66561, capabilities 1030051. videoinput: Maximum input width: 720 pixels. videoinput: Card failed to allocate capture buffers: Invalid argument xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. xcommon: Received a map, marking window as visible (57). xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 768x576 window inside 768x576 space. Segmentation fault ---------------------------------------------------------------------- Comment By: slims bims (slimsbims) Date: 2010-04-28 10:34 Message: Hello all, I have the same problem, and solved it - unplugging the USB-Logitech-webcam. HISTORY: Initial start point Under Ubuntu 9.10 64 bit, everything worked well. Then upgraded to Ubuntu 10.4 RC 1, and tvtime started and quit immediately again. I removed and reinstalled tvtime, to no avail. Finally, I did a terminal verbose, and it came to my attention that my external USB-Logictech webcam was listed. Unplugging the webcam, and tvtime works again. Also when re-plugging in the webcam _during_ the use of tvtime, no problem. However, the next time tvtime would not start again until the cam is unplugged. My tvttime-v output: Starte tvtime 1.0.2. Lese Konfiguration aus /etc/tvtime/tvtime.xml Lese Konfiguration aus /home/markus/.tvtime/tvtime.xml cpuinfo: CPU Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, family 6, model 7, stepping 10. cpuinfo: CPU measured at 3003,175MHz. tvtime: Cannot set priority to -10: Permission denied. xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 10706000 xfullscreen: Using XINERAMA for dual-head information. xfullscreen: Pixels are square. xfullscreen: Number of displays is 1. xfullscreen: Head 0 at 0,0 with size 1680x1050. xcommon: Have XTest, will use it to ping the screensaver. xcommon: Pixel aspect ratio 1:1. xcommon: Pixel aspect ratio 1:1. xcommon: Window manager is compiz and is EWMH compliant. xcommon: Using EWMH state fullscreen property. xcommon: Using EWMH state above property. xcommon: Using EWMH state below property. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 1024x576 window inside 1024x576 space. xvoutput: Using XVIDEO adaptor 310: NV17 Video Texture. speedycode: Using MMXEXT optimized functions. station: Reading stationlist from /home/markus/.tvtime/stationlist.xml /home/markus/.tvtime/stationlist.xml: No existing PAL station list "custom". station: Adding frequency table custom, all channels active videoinput: Using video4linux2 driver 'saa7134', card 'Pinnacle PCTV Stereo (saa7134)' (bus PCI:0000:06:00.0). videoinput: Version is 527, capabilities 5010015. videoinput: Width 768 too high, using 720 instead as suggested by the driver. videoinput: Maximum input width: 720 pixels. tvtime: Sampling input at 720 pixels per scanline. xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 1024x576 window inside 1024x576 space. Found "USB Device 0x46d:0x8da : USB Audio (hw:3,0)" xcommon: Received a map, marking window as visible (61). xcommon: Pixel aspect ratio 1:1. xcommon: Displaying in a 1024x576 window inside 1024x576 space. Channels count non available ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2010-02-13 13:40 Message: Open a terminal and run: $ tvtime -v If you can tell what's wrong, try editing ~/.tvtime/tvtime.xml. If not, post the output and we might help. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2010-02-12 18:43 Message: We're having the same problem. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=506987&aid=2949475&group_id=64301 ------------------------------------------------------------------------------