"PixelView PlayTV USB 2.0 Pro" to work on Linux.

Giannis Tsakiris <[email protected]> Sun, 31 May 2009 14:01:55 +0300

Newsgroups	gmane.comp.video.video4linux
Message-ID	<[email protected]>

Hi there,
I have the "PixelView PlayTV USB 2.0 Pro" model which as its name implies is
a USB tv tuner, and I have been unsuccessful in getting it to work in Linux
so far.
This is what dmesg says:
[12205.524013] usb 1-4: new high speed USB device using ehci_hcd and address
5
[12205.661846] usb 1-4: configuration #1 chosen from 1 choice
In this message I have also attached a text file which contains the output
for the lsusb -v command regarding the tuner device.
I have spend quite a lot of time search the internet for a guide or
something but I haven't found anything so far.
Any help would be much appreciated.
Thanks
Giannis

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

lsusb-output.txt (text/plain, 2.7 KB)

Bus 001 Device 005: ID 05e3:f102 Genesys Logic, Inc. VX7012 TV Box
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0xf102 VX7012 TV Box
  bcdDevice            3.02
  iManufacturer          10 Genesys
  iProduct               11 USB7012 Capture
  iSerial                12 ÊI`_i
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval               8
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)