| Newsgroups |
gmane.comp.video.video4linux |
| Message-ID |
<[email protected]> |
Hi,
This problem is simillar to the one with the KWorld VS-USB2800D that
previously don't recognize the composite input, in this case is the
ROBOTIS Bioloid Expert Kit Wireless Camera Set that is recognized by my
Fedora 10 (kernel 2.6.27.15-170.2.24) as "PointNix Intra-Oral Camera",
but xawtv or other software just show me S-Video as input and in this
case this capture device have a Composite and also a Turner (since it is
a wireless receiver capture device it use channels 1,2,3 and 4 to get
the video from the camera)...Here is what my kernel see:
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: configuration #1 chosen from 1 choice
em28xx new video device (eb1a:2860): interface 0, class 255
em28xx Doesn't have usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: chip ID is em2860
saa7115' 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
em28xx #0: found i2c device @ 0x4a [saa7113h]
em28xx #0: Your board has no unique USB ID.
em28xx #0: A hint were successfully done, based on i2c devicelist hash.
em28xx #0: This method is not 100% failproof.
em28xx #0: If the board were missdetected, please email this log to:
em28xx #0: V4L Mailing List <[email protected]>
em28xx #0: Board detected as PointNix Intra-Oral Camera
em28xx #0: Registering snapshot button...
input: em28xx snapshot button as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input11
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found PointNix Intra-Oral Camera
usb 1-3: New USB device found, idVendor=eb1a, idProduct=2860
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Thanks,
Mauricio
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list