Re: Status of cx18 drivers, mercurial vs in-kernel

Dale Pontius <[email protected]>
Newsgroups gmane.linux.drivers.video-input-infrastructure,gmane.comp.video.video4linux
Message-ID <[email protected]>
Andy Walls wrote:
> On Sun, 2009-08-09 at 16:56 -0400, Dale Pontius wrote:
>> I've been running the cx18 drivers out of mercurial since getting my
>> HVR-1600 running, almost a year ago.  As I see things, the driver is
>> pretty mature now, and in fact I see commits for cx18 in 2.6.31 that are
>> some of the last I saw going into the "regular" driver in mercurial.
>> (I'm not counting the diagnostic work that has been going on in the last
>> month or two, for one particular user.)
>>
>> Is it reasonable to go with the in-kernel cx18 driver when 2.6.31 goes
>> stable, or is there still significant value with sticking with mercurial?
> 
> As long as 2.6.31. has the following changes, then go with 2.6.31:
> 
> 1. per stream queue mutex locks changed to per quueue spinlocks, and an
> outgoing message work handling thread was added
> 
> 2. front end SIF audio AGC actually uses the SIF signal for setting the
> SIF audio AGC
> 
> 3. Sliced VBI works and can be enabled for insertion into all MPEG II PS
> type streams
> 
> These were that last major fixes I can think of that made a difference
> for anyone.  I'd imagine they are all in 2.6.31 by now, but I haven't
> checked.
> 
> I don't know of any existing major problems with the cx18 driver itself.
> The bad problems that seems to crop up now are usuaully system level
> issues: a vmalloc pool that is too small, sharing an interrupt line with
> another linux driver that has an interrupt handler with a poor response
> time, etc.
> 
> Future changes to the cx18 driver might include:
> 
> 1. MPEG Index support
> 2. Dual-watch audio support
> 3. Additional cards type or fixing up exsting broken entries 
> 4. Sliced VBI in an MPEG TS stream (maybe)
> 
> Regards,
> Andy
> 
> 
>> Dale Pontius
> 
> 
The changes I see listed for 2.6.31 are:
11864 Complete support for Sliced and Raw VBI for 625 line systems
11950 Split LeadTek PVR2100 and DVR3100H into 2 separate card entries
11951 Add DVB-T support for the Leadtek WinFast DVR3100H
12182 Add DVB-T support for Yuan MPC-718 cards with an MT352 or...

This changelog appears to start with your #4, so I'm guessing that the
older stuff is already committed.

Thanks,
Dale
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.