Re: WinFast PalmTop DTV200H USB TvTuner

Devin Heitmueller wrote:
> 
> As I told Gabor, this has been in my queue for a couple of weeks.  If
> someone else wants to help out, the following needs to be done:
> 
> 1.  An entry needs to be added to em28xx-cards.c for the device,
> setting the decoder field for the CX25843.
> 
> 2.  The windows trace he collected needs to be looked at and the GPIOs
> need to be setup properly.
> 
> 3.  The xc3028L tuner needs to be configured in em28xx-cards.c -
> *note* that this is the low power device and using the regular xc3028
> profile could burn out the tuner (just look at the entry for the AMD
> TV Wonder 600).
> 
> 4.  If you want to get digital support working, you need to adapt the
> zarlink driver to work for the WJCE6353, and configure the entry in
> the em28xx-dvb.c, providing the correct IF.
> 
> None of this is rocket science...
> 
> Devin
> 
> On Thu, Dec 4, 2008 at 5:09 PM, Nagy Gabor <[email protected]>
> wrote:
>> I've got a Leadtek
>> dtv200h<http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=413>usb
>> tv tuner, and it got 4 chips:
>>
>> EMPIA
>> 2882<http://kepfeltoltes.hu/081204/EMPIA_2882_www.kepfeltoltes.hu_.jpg>
>> WJCE6353
>> <http://kepfeltoltes.hu/081204/WJCE6353_www.kepfeltoltes.hu_.jpg>
>> CX25843-24Z<http://kepfeltoltes.hu/081204/CX25843-242_www.kepfeltoltes.hu_.jpg>
>> XCEIVE
>> XC3028LCQ<http://kepfeltoltes.hu/081204/XCEIVE_XC3028LCQ_www.kepfeltoltes.hu_.jpg>
>> front<http://kepfeltoltes.hu/081204/258590942front_www.kepfeltoltes.hu_.jpg>
>> back
>> <http://kepfeltoltes.hu/081204/22578894back_www.kepfeltoltes.hu_.jpg>
>>
>> distro: I use Debian Lenny
>> 2.6.26-1-amd64<http://cdimage.debian.org/cdimage/lenny_di_rc1/amd64/bt-cd/debian-testing-amd64-kde-CD-1.iso.torrent>-
>> "or anything you want" :D
>>
>> lsusb:
>> Bus 007 Device 005: ID 0413:6f02 Leadtek Research, Inc.
>>
>> dmesg:
>> [    2.787953] usb 7-1: new high speed USB device using ehci_hcd and
>> address
>> 2
>> [    2.928702] usb 7-1: configuration #1 chosen from 1 choice
>> [    2.928702] usb 7-1: New USB device found, idVendor=0413,
>> idProduct=6f02
>> [    2.928702] usb 7-1: New USB device strings: Mfr=0, Product=1,
>> SerialNumber=2
>> [    2.928702] usb 7-1: Product: WinFast PalmTop DTV200 H
>> [    2.928702] usb 7-1: SerialNumber: 2222
>>
>> tvtime-scanner:
>> videoinput: Cannot open capture device /dev/video0: No such file or
>> directory
>>
>> Does someone know, how to get it work under Linux?
>> Thank you!
>>
>> --
>> Nagy Gabor
>> http://szabadlinuxot.blogspot.com/
>> --
>> video4linux-list mailing list
>> Unsubscribe
>> mailto:[email protected]?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/video4linux-list
>>
> 
> 
> 
> -- 
> Devin J. Heitmueller
> http://www.devinheitmueller.com
> AIM: devinheitmueller
> 
> --
> video4linux-list mailing list
> Unsubscribe mailto:[email protected]?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
> 
> 

Hi,
    I was wandering if there si a way to make the leadtek dtv 200h tv tuner
work under linux.
Thanks!
-- 
View this message in context: http://n2.nabble.com/WinFast-PalmTop-DTV200H-USB-TvTuner-tp1615551p3770513.html
Sent from the video4linux-list mailing list archive at Nabble.com.

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list