Re: cx88_alsa - getting loud white noise with capture card.

Tried this again on 2.6.31-14 and still not able to get audio working.
Using this command:

mplayer -vo null tv:// -tv
driver=v4l2:device=/dev/video1:alsa:adevice=hw.2,0:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL-BG:fps=25:input=0

Video works but getting nothing but loud static on audio. Please help :(


2008/8/3 Roman Gaufman <[email protected]>:
> Hi,
>
> I have an 8 audio + 8 video PCI-Express Conexant 23881 DVR Card I'm
> trying to get working in Linux.
>
> The video channels all work flawlessly and the audio is recognized,
> but I just get very loud white noise no matter what I try.
>
> I tried the following commands and been googling for days to no avail:
>
> for i in 0 1 2 3 4 5 6 7; do /usr/bin/mencoder tv:// -tv
> driver=v4l2:device=/dev/video$i:alsa:adevice=hw.$i,0:amode=0:audiorate=32000:volume=100:immediatemode=0:norm=PAL-DK:input=0:width=720:height=576:outfmt=yuy2
> -oac mp3lame -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=5000 -frames
> 300 -o test$i.avi &  done
>
> for i in 0 1 2 3 4 5 6 7; do arecord -d 10 -D hw:$i,0 -c 2 -f S16_LE
> --period-size=65536 --buffer-size=524288 -r 48000 test$i.wav & done
>
> I had to boot the kernel with acpi=off irqpoll for video not to give
> me input/output errors, but audio still gives me loud white noise.
>
> The only error messages I see are:
>
> [ 3758.546252] cx88[4]/1: IRQ loop detected, disabling interrupts
> [ 3758.546323] cx88[4]: irq aud [0x1000] dn_sync*
> [ 3758.546329] cx88[4]: irq aud [0x1001] dn_risci1* dn_sync*
>
> My bios Plug & Play OS setting is set to no.
>
> This is what arecord -l returns:
>
> **** List of CAPTURE Hardware Devices ****
> card 0: CX8801_1 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 1: CX8801 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 2: CX8801_2 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 3: CX8801_3 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 4: CX8801_4 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 5: CX8801_5 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 6: CX8801_6 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
> card 7: CX8801_7 [Conexant CX8801], device 0: CX88 Digital [CX88 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
> This is what lspci -v returns (both with and without -n)
>
> - [ ] 04:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI
>      Video and Audio Decoder (rev 05)
>        Subsystem: Unknown device c180:c980
>        Flags: bus master, medium devsel, latency 64, IRQ 19
>        Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
>        Capabilities: [44] Vital Product Data
>        Capabilities: [4c] Power Management version 2
> - [ ] 04:07.0 0400: 14f1:8800 (rev 05)
>        Subsystem: c180:c980
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>      ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>      <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 19
>        Region 0: Memory at d0000000 (32-bit, non-prefetchable)
>      [size=16M]
>        Capabilities: [44] Vital Product Data
>        Capabilities: [4c] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>      PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> - [ ] 04:07.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video
>      and Audio Decoder [Audio Port] (rev 05)
>        Subsystem: Unknown device c180:c980
>        Flags: bus master, medium devsel, latency 64, IRQ 19
>        Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
>        Capabilities: [4c] Power Management version 2
> - [ ] 04:07.1 0480: 14f1:8801 (rev 05)
>        Subsystem: c180:c980
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>      ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>      <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 19
>        Region 0: Memory at d1000000 (32-bit, non-prefetchable)
>      [size=16M]
>        Capabilities: [4c] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>      PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Any ideas at all?
>

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list