TTL issue, with more than one channel

Hi

HI have configured two multicast channels, and when I start the secound
one the TTL for that channel remains set to 1?

I use the following command to start the streams.

start trailer multicast local1
and the I start the secound one like this.

start trailer2 mcast local1

this is an example if i run a tcpdump on that stremam

13:38:30.555496 192.168.1.115.32772 > 239.1.1.2.11111: udp 1316 (DF) [ttl
1]

this is my config.

# vls configuration file (Example)

# Application wide settings
BEGIN "Vls"
  LogFile       = "vls.log"             # log file
  ScreenLog     = "enable"              # log to the console
  SystemLog     = "disable"             # log to the systemlog
END

# Security informations :
#
# The section "Groups" describes which group is allowed to use which
command.
# Each user who belongs to the 'master" group has all the power on the
server.
# Each one who belongs to the "monitor" group is a "read-only" user.
BEGIN "Groups"
# --- Format:
# groupname     = "cmd1|cmd2|..."
# --- Example:
  monitor       = "help|browse|logout"
  master        =
"help|browse|start|resume|suspend|stop|shutdown|logout|config|program|input|channel|show"
END

# The section "Users" describes each user
# Use "mkpasswd" to generate the encrypted password.
BEGIN "Users"
# --- Format:
# username      = "encryptedpassword:group"
# --- Example:
  monitor       = "3BcKWoiQn0vi6:monitor"       # password is 'monitor'
  bozo          = "JKg2TpPerilnw:master"        # password is 'bozo'
END

# Telnet Administration
BEGIN "Telnet"
#  Domain        = "Inet6"              # Inet4 or Inet6
  LocalPort     = "9999"                # Port to use for that purpose
  Use = "true"
END

# Streams sources declaration
BEGIN "Inputs"
# --- Format:
# InputName     = "Type"
# --- Example:
  local1       = "local"                # Local input example
#  kfir         = "video"               # Video input example (mpeg
encoder)
#  dvb          = "dvb"                 # Video input example (DVB card)
END

BEGIN "Input"
  ProgramCount = "2"
END

# --- Format:
# BEGIN "program_number"
#   Name     = "program_name"
#   Type     = "type"          # can be Mpeg1-PS, Mpeg2-PS, Mpeg2-TS, or
Dvd
#   FileName = "path"          # use this variable if Type is not "Dvd"
#   Device   = "device"        # use this variable with type "Dvd"
# END

BEGIN "1"
  Name	   = "trailer"
  FileName = "/home/videolan/streams/vts_01_5.vob"
  Type	   = "Mpeg2-PS"
END

BEGIN "2"
  Name     = "trailer2"
  FileName = "/home/videolan/streams/vts_02_3.vob"
  Type	   = "Mpeg2-PS"
END

# --- Example:
#BEGIN "1"     # MPEG2 stream stored in /home/videolan/streams/Dolby.vob
#  Name     = "dolby"
#  FileName = "/media/films/Dolby_Canyon.vob"
#  Type     = "Mpeg2-PS"
#END

#BEGIN "2"     # another file
#  Name     = "canyon"
#  FileName = "Dolby_Canyon.vob"
#  Type     = "Mpeg2-PS"
#END

#BEGIN "3"     # Dvd
#  Name     = "film"
#  Device   = "/dev/cdrom"
#  Type     = "Dvd"
#END

#BEGIN "4"     # Dvd stored on a hard disk
#  Name     = "matrix"
#  Device   = "/mnt/data/matrix/VIDEO_TS"
#  Type     = "Dvd"
#END

# Video input configuration
BEGIN "kfir"
# --- Example:
# Device        = "/dev/video"     # Video4linux device (default is
/dev/video)
# Type          = "Mpeg2-PS"       # Stream type (default is "Mpeg2-PS")
END

# Video input (DVB) configuration
BEGIN "dvb"
# --- Example:
#  DeviceNumber = "0"                   # /dev/dvb/adapter<i>
#  SendMethod   = "0"                   # 0 - Send All Pids
                                        # 1 - Send only MPEG2 datas
END

# Channel (outputs) declaration
BEGIN "Channels"
# --- Format:
# ChannelName   = "Type"
# --- Example:
#  localhost     = "network"
#  client1       = "network"
#  client2       = "network"
  multicast     = "network"
  mcast		= "network"
#  localfile     = "file"
END

# Channels configuration
#BEGIN "localhost"         # The client is on the same host as the server
#  DstHost = "127.0.0.1"
#  DstPort = "1234"
#END

#BEGIN "client1"                          # unicast example
#  DstHost = "192.168.1.2"                # destination host
#  DstPort = "1234"                       # destination port
#END

#BEGIN "client2"                          # unicast with IPv6 example
#  Domain  = "inet6"
#  DstHost = "3ffe:ffff::2:12:42"         # destination host
#  DstPort = "1234"                       # destination port
#END

BEGIN "multicast"                        # multicast example
  Type    = "multicast"
  TTL     = "4"                          # Time To Live
  DstHost = "239.1.1.1"                # multicast address
  DstPort = "11111"                       # destination port
END

BEGIN "mcast"
  Type    = "mcast"
  TTL     = "4"			  #Time To Live
  DstHost = "239.1.1.2"
  DstPort = "11111"
END

#BEGIN "localfile"                        # file output example
#  FileName = "stream.ts"
#  Append   = "no"                        # rewrite the file if it exists
#END

# Commands automatically lanched on Startup
# Commands shall be like they would be typed in a telnet console.
BEGIN "LaunchOnStartUp"
#  command1 = "start dolby localhost local1 --loop"
#  command2 = "start 28009 client1 dvb"
END


Regards Nicklas

-- 
This is the vls-devel mailing-list, see http://www.videolan.org/streaming/
To unsubscribe, please read http://developers.videolan.org/lists.html
If you are in trouble, please contact <[email protected]>