Re: Compilation of Latest SVN

Hi Brendan,

confirmed. I see the same errors when cross-compiling with mingw 3.4.x
on a linux host. Will do some more tests and then apply your patch...

Regards,
Michael


Quoting Brendan Brewster <[email protected]>:

> Apologies but I'm thinking that this list doesn't allow the attachment so
> am providing it in-line just in case.
>
> $ more xvid_120719.patch
> diff -urN xvidcore_120719.orig/dshow/Makefile xvidcore/dshow/Makefile
> --- xvidcore_120719.orig/dshow/Makefile 2012-07-19 23:41:58.000000000 -0400
> +++ xvidcore/dshow/Makefile     2012-07-19 23:47:12.000000000 -0400
> @@ -112,7 +112,7 @@
>                         $(OBJECTS) xvid.ax.def \
>                         -L$(DXTREE)/Lib -lstrmiids \
>                         $(DXBASECLASSES)/strmbase.lib \
> -                       -luuid -lwinmm -lole32 -loleaut32 -lcomctl32
> -lstdc++
> +                       -luuid -lwinmm -lole32 -loleaut32 -lcomctl32
> -lstdc++ -lgdi32
>
>  clean:
>         @echo "  Cl: Object files and target lib"
> diff -urN xvidcore_120719.orig/dshow/src/CXvidDecoder.h
> xvidcore/dshow/src/CXvidDecoder.h
> --- xvidcore_120719.orig/dshow/src/CXvidDecoder.h       2012-07-19
> 23:41:57.000000000 -0400
> +++ xvidcore/dshow/src/CXvidDecoder.h   2012-07-19 23:49:09.375000000 -0400
> @@ -29,6 +29,10 @@
>  #include <xvid.h>
>  #include "IXvidDecoder.h"
>
> +#ifndef HWND_MESSAGE
> +#define HWND_MESSAGE ((HWND)-3)
> +#endif
> +
>  #define XVID_NAME_L            L"Xvid MPEG-4 Video Decoder"
>
>  /* --- fourcc --- */
>
> Thanks again!
> Brendan
>
> On Fri, Jul 20, 2012 at 12:18 AM, Brendan Brewster <
> [email protected]> wrote:
>
>> Hi,
>>
>> I am using a moderately older version of MinGW and have not had any true
>> problems compiling XviD in the past.
>>
>> I obtained the latest SVN (first time in a long while), compiled the
>> xvidcore.dll and xvidvfw.dll fine but had issues compiling the dshow module.
>>
>> $ make DXTREE=/d/dx90/
>>   D: =build
>>   C: ./config.c
>>   C: ./debug.c
>>   C: ./Configure.cpp
>> In file included from <command line>:3:
>> d:/dx90/mingw_dshow_port.h:6:1: warning: "_WINGDI_" redefined
>> In file included from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/windows.h:52,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/rpc.h:2,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wtypes.h:1,
>>                  from d:/dx90/mingw_dshow_port.h:1,
>>                  from <command line>:3:
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wingdi.h:3:1:
>> warning: this is the location of the previous definition
>>   C: ./CAbout.cpp
>> In file included from <command line>:3:
>> d:/dx90/mingw_dshow_port.h:6:1: warning: "_WINGDI_" redefined
>> In file included from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/windows.h:52,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/rpc.h:2,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wtypes.h:1,
>>                  from d:/dx90/mingw_dshow_port.h:1,
>>                  from <command line>:3:
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wingdi.h:3:1:
>> warning: this is the location of the previous definition
>>   C: ./CXvidDecoder.cpp
>> In file included from <command line>:3:
>> d:/dx90/mingw_dshow_port.h:6:1: warning: "_WINGDI_" redefined
>> In file included from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/windows.h:52,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/rpc.h:2,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wtypes.h:1,
>>                  from d:/dx90/mingw_dshow_port.h:1,
>>                  from <command line>:3:
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wingdi.h:3:1:
>> warning: this is the location of the previous definition
>> src/CXvidDecoder.cpp: In member function `virtual long int
>> CXvidDecoder::CompleteConnect(PIN_DIRECTION, IPin*)':
>> src/CXvidDecoder.cpp:966: error: `HWND_MESSAGE' was not declared in this
>> scope
>> make: *** [CXvidDecoder.obj] Error 1
>>
>> I patched CXvidDecoder.h as follows (to define HWND_MESSAGE if needed).
>>
>> $ diff -u src/CXvidDecoder.h.v0 src/CXvidDecoder.h
>> --- src/CXvidDecoder.h.v0       2012-07-19 23:41:58.000000000 -0400
>> +++ src/CXvidDecoder.h  2012-07-19 23:49:09.375000000 -0400
>> @@ -29,6 +29,10 @@
>>  #include <xvid.h>
>>  #include "IXvidDecoder.h"
>>
>> +#ifndef HWND_MESSAGE
>>  +#define HWND_MESSAGE ((HWND)-3)
>> +#endif
>> +
>>  #define XVID_NAME_L            L"Xvid MPEG-4 Video Decoder"
>>
>>  /* --- fourcc --- */
>>
>> I then retried make.
>>
>> $ make DXTREE=/d/dx90/
>>   C: ./CXvidDecoder.cpp
>> In file included from <command line>:3:
>> d:/dx90/mingw_dshow_port.h:6:1: warning: "_WINGDI_" redefined
>> In file included from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/windows.h:52,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/rpc.h:2,
>>                  from
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wtypes.h:1,
>>                  from d:/dx90/mingw_dshow_port.h:1,
>>                  from <command line>:3:
>> d:/MinGW/bin/../lib/gcc/mingw32/3.4.5/../../../../include/wingdi.h:3:1:
>> warning: this is the location of the previous definition
>>   W: ./xvid.ax.rc
>>   L: xvid.ax
>> Creating library file: xvid.ax.a
>> CXvidDecoder.obj:CXvidDecoder.cpp:(.text+0x1b9b): undefined reference to
>> `GetStockObject@4'
>> collect2: ld returned 1 exit status
>> make: *** [xvid.ax] Error 1
>>
>> So, I then patched the Makefile after some further research as follows (to
>> pick up the gdi32 lib).
>>
>> $ diff -u Makefile.v0 Makefile
>> --- Makefile.v0 2012-07-19 23:41:58.000000000 -0400
>> +++ Makefile    2012-07-19 23:47:12.000000000 -0400
>> @@ -112,7 +112,7 @@
>>                         $(OBJECTS) xvid.ax.def \
>>                         -L$(DXTREE)/Lib -lstrmiids \
>>                         $(DXBASECLASSES)/strmbase.lib \
>> -                       -luuid -lwinmm -lole32 -loleaut32 -lcomctl32
>> -lstdc++
>> +                       -luuid -lwinmm -lole32 -loleaut32 -lcomctl32
>> -lstdc++ -lgdi32
>>
>>  clean:
>>         @echo "  Cl: Object files and target lib"
>>
>> As can be seen, I was then able to successfully build xvid.ax.
>>
>> $ make DXTREE=/d/dx90/
>>   L: xvid.ax
>> Creating library file: xvid.ax.a
>>
>> Is this just due to changes in XviD and given my old tool chain or am I
>> just doing something wrong?
>>
>> I am attaching a patch [xvid_120719.patch] with the above mods that allows
>> me to build in my environment.
>>
>> Please let me know if you have any thoughts or if there is any further
>> info I can provide.
>>
>> Thanks,
>> Brendan
>>
> _______________________________________________
> Xvid-devel mailing list
> [email protected]
> http://list.xvid.org/mailman/listinfo/xvid-devel
>
>