Re: Jain SIP Testing App

Hi!

You can run the self test in test/load/concurrency. If you set your 
-server flag on your jvm and set up your memory options correctly you 
can achieve better than advertised performance. Suggestions for sip 
performance testing : Use SIPP.

Ranga

Yake wrote:
> Hello, 
>
> I have read some testing result with Jain-SIP from the homepage:
>
> Although not carefully optimized for speed, the RI can achieve 79 Call Attempts
> Per Second (CAPS) for dialog-stateful call setup/teardown based on self test on
> a 2 GHZ 1 GB Pentium 5. Over 200 CAPS are achieved on a 4-Processor NETRA. New
> performance improvements have been applied to the RI recently and 475 CAPS have
> been reported using the self test with TCP on an Intel Core 2 Duo E6300 (1.86
> Ghz dual-core).
>
> I would like to know what tools was used for testing the CAPS, are they in the
> source code already?
>
> Any suggestions on how to make SIP performance testing is welcome!
>
> Thanks 
>
> /Yake
>
> _______________________________________________
> nist-sip mailing list
> [email protected]
> http://www-x.antd.nist.gov/mailman/listinfo/nist-sip
>   


-- 
M. Ranganathan 

Advanced Networking Technologies Division,
National Institute of Standards and Technology (NIST),
100 Bureau Drive, Stop 8920, Gaithersburg, MD 20899. 
tel:301 975 3664 , fax:301 590 0932 http://w3.antd.nist.gov/
Advanced Networking Technologies For the People!