Re: IPv6 bind wrong IP. #4199

Hello,

does it work when you set the IPv6 address in the listen directly, e.g. without the #!define?

Cheers,

Henning

> -----Original Message-----
> From: vunm.allsign--- via sr-users <[email protected]>
> Sent: Dienstag, 8. April 2025 10:45
> To: [email protected]
> Cc: [email protected]
> Subject: [SR-Users] IPv6 bind wrong IP. #4199
> 
> Hi guys,
> 
> I opened issue on github: https://github.com/kamailio/kamailio/issues/4199
> 
> - Description:
> Kamailio (5.8.x): SIP proxy
> FreeSWITCH: Media
> 
> - OS: Debian 12
> gateway: aaaa:bbb:cccc:20::1
> ipv6: aaaa:bbb:cccc:20::41e
> 
> - kamailio.cfg:
> #!define ADDR_IPV4 xxx.xxx.xxx.xxx
> #!define ADDR_IPV6 [aaaa:bbb:cccc:20::41e]
> 
> listen=ADDR_IPV4
> listen=ADDR_IPV6
> 
> - I execute netstat -nlutp:
> tcp6         0      0 aaaa:bbb:cccc:20:::5060 :::*                    LISTEN
> 1691274/kamailio
> tcp6         0      0 aaaa:bbb:cccc:20:::5061 :::*                    LISTEN
> 1691274/kamailio
> udp6        0      0 aaaa:bbb:cccc:20:::5060 :::*
> 1691222/kamailio
> 
> Why I set listen ip is aaaa:bbb:cccc:20::41e but kamailio stripped the last part
> of the address aaaa:bbb:cccc:20::
> 
> I have tried many ways but it does not work.Is there any additional
> configuration required regarding the Debian network interface?
> 
> - Here is interfaces(of course i can ping from/to ipv6 address):
> # Additional interfaces, just in case we're using # multiple networks allow-
> hotplug eth1 iface eth1 inet6 static address aaaa:bbb:cccc:20::41e netmask 64
> gateway aaaa:bbb:cccc:20::1 autoconf 0
> 
> 
> 
> Thank you.
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions -- sr-
> [email protected] To unsubscribe send an email to sr-users-
> [email protected]
> Important: keep the mailing list in the recipients, do not reply only to the
> sender!
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions -- [email protected]
To unsubscribe send an email to [email protected]
Important: keep the mailing list in the recipients, do not reply only to the sender!