Re: [EXTERNAL] rtpengine error: no rtpp_set_list->rset_first

I meant the config for Kamailio's rtpengine module.

On 09/06/2025 02.33, disa_369--- via sr-users wrote:
> Hello Richard.
> Here it is
>
> [rtpengine]
> table = 0
> # no-fallback = false
> ### for userspace forwarding only:
> # table = -1
>
> ### a single interface:
> # interface = 123.234.345.456
> ### separate multiple interfaces with semicolons:
> # interface = internal/12.23.34.45;external/23.34.45.54
> ### for different advertised address:
> # interface = 12.23.34.45!23.34.45.56
>
> interface = internal/10.192.32.185
>
> # name of config section in this file to contain signalling templates
> templates = templates
>
>
> listen-ng = 127.0.0.1:2223
> # listen-tcp = 25060
> # listen-udp = 12222
>
> ### interface for HTTP, WS and Prometheus
> # listen-http = 9101
> listen-http = localhost:2225
>
> # listen-https = localhost:2226
> # https-cert =
> # https-key =
>
> listen-cli = localhost:2224
>
> timeout = 60
> silent-timeout = 3600
> tos = 184
> # control-tos = 184
> # control-pmtu = dont
> # delete-delay = 30
> # final-timeout = 10800
> # endpoint-learning = heuristic
> # reject-invalid-sdp = false
>
> # foreground = false
> # pidfile = /run/ngcp-rtpengine-daemon.pid
> # num-threads = 16
> # media-num-threads = 8
> # http-threads = 4
>
> port-min = 30000
> port-max = 40000
> # max-sessions = 5000
>
> # software-id = rtpengine
> # max-load = 5
> # max-cpu = 90
> # max-bandwidth = 10000000
> # scheduling = default
> # priority = -3
> # idle-scheduling = idle
> # idle-priority = 10
>
> recording-dir = /var/spool/rtpengine
> recording-method = proc
> # recording-format = raw
>
> # redis = 127.0.0.1:6379/5
> # redis-write = [email protected]:6379/42
> # redis-subscribe = [email protected]:6379/43
> # redis-num-threads = 8
> # no-redis-required = false
> # redis-expires = 86400
> # redis-allowed-errors = -1
> # redis-disable-time = 10
> # redis-cmd-timeout = 0
> # redis-connect-timeout = 1000
> # redis-resolve-on-reconnect = false
>
> # b2b-url = http://127.0.0.1:8090/
> # xmlrpc-format = 0
> # janus-secret = ABC123
>
>   log-level = 7
> # log-stderr = false
> # log-facility = daemon
> # log-facility-cdr = local0
> # log-facility-rtcp = local1
> # debug-srtp = false
> # log-srtp-keys = false
> # dtls-cert-cipher = prime256v1
> # dtls-rsa-key-size = 2048
> # dtls-mtu = 1200
> # dtls-signature = sha-256
> # dtls-ciphers = DEFAULT:!NULL:!aNULL:!SHA256:!SHA384:!aECDH:!AESGCM+AES256:!aPSK
>
> # dtmf-no-log-injects = 0
>
> # graphite = 127.0.0.1:9006
> # graphite-interval = 60
> # graphite-prefix = foobar.
>
> # homer = 123.234.345.456:65432
> # homer-protocol = udp
> # homer-id = 2001
>
> # mysql-host = localhost
> # mysql-port = 3306
> # mysql-user = mysql
> # myser-pass = mysql
> # mysql-query = select data from voip.files where id = %llu
>
> # dtx-delay = 50
> # max-dtx = 600
> # dtx-buffer = 5
> # dtx-lag = 100
> # dtx-shift = 0
> # amr-dtx = native
> # dtx-cn-params = 60
> # silence-detect = 0.05
> # cn-payload = 60
>
> # player-cache = false
> # kernel-player = 0
> # kernel-player-media = 128
>
> # audio-buffer-length = 120
> # audio-buffer-delay = 10
> # audio-player = on-demand
>
> # sip-source = false
> # dtls-passive = false
>
> # mqtt-host = localhost
> # mqtt-port = 1883
> # mqtt-tls-alpn = mqtt
> # mqtt-id =
> # mqtt-user = foo
> # mqtt-pass = bar
> # mqtt-capath =
> # mqtt-cafile =
> # mqtt-certfile =
> # mqtt-keyfile =
> # mqtt-publish-qos = 0
> # mqtt-publish-topic = rtpengine
> # mqtt-publish-interval = 5000
> # mqtt-publish-scope = media
>
> # mos = CQ
> # poller-per-thread = false
> # io-uring = false
> # socket-cpu-affinity = -1
> # rtcp-interval = 5000
>
> # music-on-hold max possible duration (in ms).
> # When not defined (set to 0), it takes 1800000ms default value.
> # moh-max-duration = 1800000
>
> # music-on-hold max possible repeats.
> # moh-max-duration always takes a precedence over it.
> # By default is always 999 if not defined otherwise.
> # moh-max-repeats = 999
>
> # controls the value to be added to the session level of SDP
> # whenever MoH is triggered. If not defined, then not in use.
> # moh-attr-name = rtpengine-hold
>
> # preload-media-files = /var/media/file1.wav ; /var/media/file2.wav ; /var/media/file3.wav ; on-demand
> # media-files-reload = 60
> # preload-db-media = 1; 2; 3; 4; on-demand
> # db-media-reload = 3600
> # db-media-cache = /var/cache/rtpengine
> # preload-db-cache = 1; 2; 3; 4; on-demand
> # cache-media-reload = 3600
>
> # signalling templates (see key `templates` above)
> [templates]
> WebRTC = transport-protocol=UDP/TLS/RTP/SAVPF ICE=force trickle-ICE rtcp-mux=[offer require] no-rtcp-attribute SDES=off generate-mid
>
> [rtpengine-testing]
> table = -1
> interface = 10.15.20.121
> listen-ng = 2223
> foreground = true
> log-stderr = true
> log-level = 7
> prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo nona /etc/rtpengine/rtpengine.conf
> sudo: nona: command not found
> prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo nano /etc/rtpengine/rtpengine.conf
> prokhorovdg_adm_rn@zaks-sbc01-op:~$ sudo cat /etc/rtpengine/rtpengine.conf
> [rtpengine]
>
> table = 0
> # no-fallback = false
> ### for userspace forwarding only:
> # table = -1
>
> ### a single interface:
> # interface = 123.234.345.456
> ### separate multiple interfaces with semicolons:
> # interface = internal/12.23.34.45;external/23.34.45.54
> ### for different advertised address:
> # interface = 12.23.34.45!23.34.45.56
>
> interface = internal/10.192.32.185
>
> # name of config section in this file to contain signalling templates
> templates = templates
>
>
> listen-ng = 127.0.0.1:2223
> # listen-tcp = 25060
> # listen-udp = 12222
>
> ### interface for HTTP, WS and Prometheus
> # listen-http = 9101
> listen-http = localhost:2225
>
> # listen-https = localhost:2226
> # https-cert =
> # https-key =
>
> listen-cli = localhost:2224
>
> timeout = 60
> silent-timeout = 3600
> tos = 184
> # control-tos = 184
> # control-pmtu = dont
> # delete-delay = 30
> # final-timeout = 10800
> # endpoint-learning = heuristic
> # reject-invalid-sdp = false
>
> # foreground = false
> # pidfile = /run/ngcp-rtpengine-daemon.pid
> # num-threads = 16
> # media-num-threads = 8
> # http-threads = 4
>
> port-min = 30000
> port-max = 40000
> # max-sessions = 5000
>
> # software-id = rtpengine
> # max-load = 5
> # max-cpu = 90
> # max-bandwidth = 10000000
> # scheduling = default
> # priority = -3
> # idle-scheduling = idle
> # idle-priority = 10
>
> recording-dir = /var/spool/rtpengine
> recording-method = proc
> # recording-format = raw
>
> # redis = 127.0.0.1:6379/5
> # redis-write = [email protected]:6379/42
> # redis-subscribe = [email protected]:6379/43
> # redis-num-threads = 8
> # no-redis-required = false
> # redis-expires = 86400
> # redis-allowed-errors = -1
> # redis-disable-time = 10
> # redis-cmd-timeout = 0
> # redis-connect-timeout = 1000
> # redis-resolve-on-reconnect = false
>
> # b2b-url = http://127.0.0.1:8090/
> # xmlrpc-format = 0
> # janus-secret = ABC123
>
>   log-level = 7
> # log-stderr = false
> # log-facility = daemon
> # log-facility-cdr = local0
> # log-facility-rtcp = local1
> # debug-srtp = false
> # log-srtp-keys = false
> # dtls-cert-cipher = prime256v1
> # dtls-rsa-key-size = 2048
> # dtls-mtu = 1200
> # dtls-signature = sha-256
> # dtls-ciphers = DEFAULT:!NULL:!aNULL:!SHA256:!SHA384:!aECDH:!AESGCM+AES256:!aPSK
>
> # dtmf-no-log-injects = 0
>
> # graphite = 127.0.0.1:9006
> # graphite-interval = 60
> # graphite-prefix = foobar.
>
> # homer = 123.234.345.456:65432
> # homer-protocol = udp
> # homer-id = 2001
>
> # mysql-host = localhost
> # mysql-port = 3306
> # mysql-user = mysql
> # myser-pass = mysql
> # mysql-query = select data from voip.files where id = %llu
>
> # dtx-delay = 50
> # max-dtx = 600
> # dtx-buffer = 5
> # dtx-lag = 100
> # dtx-shift = 0
> # amr-dtx = native
> # dtx-cn-params = 60
> # silence-detect = 0.05
> # cn-payload = 60
>
> # player-cache = false
> # kernel-player = 0
> # kernel-player-media = 128
>
> # audio-buffer-length = 120
> # audio-buffer-delay = 10
> # audio-player = on-demand
>
> # sip-source = false
> # dtls-passive = false
>
> # mqtt-host = localhost
> # mqtt-port = 1883
> # mqtt-tls-alpn = mqtt
> # mqtt-id =
> # mqtt-user = foo
> # mqtt-pass = bar
> # mqtt-capath =
> # mqtt-cafile =
> # mqtt-certfile =
> # mqtt-keyfile =
> # mqtt-publish-qos = 0
> # mqtt-publish-topic = rtpengine
> # mqtt-publish-interval = 5000
> # mqtt-publish-scope = media
>
> # mos = CQ
> # poller-per-thread = false
> # io-uring = false
> # socket-cpu-affinity = -1
> # rtcp-interval = 5000
>
> # music-on-hold max possible duration (in ms).
> # When not defined (set to 0), it takes 1800000ms default value.
> # moh-max-duration = 1800000
>
> # music-on-hold max possible repeats.
> # moh-max-duration always takes a precedence over it.
> # By default is always 999 if not defined otherwise.
> # moh-max-repeats = 999
>
> # controls the value to be added to the session level of SDP
> # whenever MoH is triggered. If not defined, then not in use.
> # moh-attr-name = rtpengine-hold
>
> # preload-media-files = /var/media/file1.wav ; /var/media/file2.wav ; /var/media/file3.wav ; on-demand
> # media-files-reload = 60
> # preload-db-media = 1; 2; 3; 4; on-demand
> # db-media-reload = 3600
> # db-media-cache = /var/cache/rtpengine
> # preload-db-cache = 1; 2; 3; 4; on-demand
> # cache-media-reload = 3600
>
> # signalling templates (see key `templates` above)
> [templates]
> WebRTC = transport-protocol=UDP/TLS/RTP/SAVPF ICE=force trickle-ICE rtcp-mux=[offer require] no-rtcp-attribute SDES=off generate-mid
>
> [rtpengine-testing]
> table = -1
> interface = 10.15.20.121
> listen-ng = 2223
> foreground = true
> log-stderr = true
> log-level = 7
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions -- [email protected]
> To unsubscribe send an email to [email protected]
> Important: keep the mailing list in the recipients, do not reply only to the sender!
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions -- [email protected]
To unsubscribe send an email to [email protected]
Important: keep the mailing list in the recipients, do not reply only to the sender!