Re: RTPEngine installation on RHEL 8.x or Rocky Linux 8.x

Chandramouli P via sr-users <[email protected]> Mon, 15 Sep 2025 21:13:24 +0530

Newsgroups	gmane.comp.voip.ser
Message-ID	<CAKYJ-7C-A81Dgw5cNJNQhCyfXDqZ-B=HWkwvLRgE91cHr7QNsg@mail.gmail.com>

Hello Sergy,

Good morning and thank you for your reply. Somehow, I wasn't able to login
to my pastebin account. Please find the error that I am getting in the
attached file. Thank you.

Best regards,
Chandramouli.

On Mon, Sep 15, 2025 at 5:43 PM Sergei Safarov <[email protected]> wrote:

> Pastebin is no available more.
> Please post again.
>
> On Sat, 2025-09-13 at 13:43 +0530, Chandramouli P wrote:
>
> Hello Sergey,
>
> Good morning and thank you for your reply. As you suggested, I tried to
> compile the mr12.4 version and getting the below error:
>
> *https://pastebin.com/fc54vv9T <https://pastebin.com/fc54vv9T>*
>
> Please advise me to move forward and thank you in advance.
>
> Best Regards,
> Chandramouli.
>
>
>
>
>
> On Fri, Sep 12, 2025 at 11:15 PM Sergey Safarov <[email protected]>
> wrote:
>
> Looks like you're trying to build the master branch
> I use https://github.com/sipwise/rtpengine/commits/mr12.4 branch on
> CentOS 8
> Probably this should also work for Rocky 8
> After you compile this branch, you can build for a more recent branch.
>
>
> On Fri, Sep 12, 2025 at 5:11 PM Chandramouli P via sr-users <
> [email protected]> wrote:
>
> Hello Alex,
>
> Good morning and thank you for your reply. As you suggested, I followed
> and tried to install RTPEngine on Rocky Linux 8.x. But, I'm still getting
> errors.
>
> Please find the installation steps that I followed here: *https://pastebin.com/wi4YtbKZ
> <https://pastebin.com/wi4YtbKZ>*
>
> Please find the complete error description here: *https://pastebin.com/LbgYQMGb
> <https://pastebin.com/LbgYQMGb>*
>
> Please advise me to move forward and thank you in advance.
>
> Best Regards,
> Chandramouli.
>
>
>
> On Wed, Sep 10, 2025 at 8:04 PM Alex Balashov <[email protected]>
> wrote:
>
> It would be hard to share a step-by-step guide as I don't have one handy
> and it would be labourious to set up a fresh host for the express purpose
> of writing one for you, but I do this routinely on EL8 and Rocky 8, and
> have done so dozens of times.
>
> Tips:
>
> - You will need EPEL.
>
> - You will need the CBR repository or whatever has replaced PowerTools in
> Rocky 8.
>
> Otherwise, it's just installing the dependencies until you get there.
>
> -- Alex
>
> > On Sep 10, 2025, at 10:07 AM, Chandramouli P via sr-users <
> [email protected]> wrote:
> >
> > Hello,
> >
> > I tried a lot to install RTPEngine on RHEL 8.x and as well as in Rocky
> Linux 8.x also using different sources. But, I am facing a lot of issues
> like libraries issues, dependencies issues, conflict issues etc.  Anyone
> successfully installed RTPEngine on RHEL 8.x or Rocky Linux 8.x (Not on
> CentOS)? If so, could you please share the documentation step-by-step or
> web URL? Thanks in advance.
> >
> > Best regards,
> > Chandramouli.
> > __________________________________________________________
> > Kamailio - Users Mailing List - Non Commercial Discussions --
> [email protected]
> > To unsubscribe send an email to [email protected]
> > Important: keep the mailing list in the recipients, do not reply only to
> the sender!
>
> --
> Alex Balashov
> Principal Consultant
> Evariste Systems LLC
> Web: https://evaristesys.com, https://www.csrpswitch.com
> Tel: +1-706-510-6800
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions --
> [email protected]
> To unsubscribe send an email to [email protected]
> Important: keep the mailing list in the recipients, do not reply only to
> the sender!
>
>
>

__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions -- [email protected]
To unsubscribe send an email to [email protected]
Important: keep the mailing list in the recipients, do not reply only to the sender!

ErrorLog-rtpengine-mr124.rtf (text/rtf, 8.8 KB)

{\rtf1\ansi\ansicpg1252\cocoartf2822
\cocoatextscaling0\cocoaplatform0{\fonttbl\f0\fswiss\fcharset0 ArialMT;}
{\colortbl;\red255\green255\blue255;\red0\green0\blue0;\red255\green255\blue255;\red156\green156\blue156;
}
{\*\expandedcolortbl;;\cssrgb\c0\c0\c0;\cssrgb\c100000\c100000\c100000;\cssrgb\c67451\c67451\c67451;
}
{\*\listtable{\list\listtemplateid1\listhybrid{\listlevel\levelnfc0\levelnfcn0\leveljc0\leveljcn0\levelfollow0\levelstartat1\levelspace360\levelindent0{\*\levelmarker \{decimal\}}{\leveltext\leveltemplateid1\'01\'00;}{\levelnumbers\'01;}\fi-360\li720\lin720 }{\listname ;}\listid1}}
{\*\listoverridetable{\listoverride\listid1\listoverridecount0\ls1}}
\paperw11900\paperh16840\margl1440\margr1440\vieww28600\viewh14580\viewkind0
\deftab720
\pard\tx220\tx720\pardeftab720\li720\fi-720\partightenfactor0
\ls1\ilvl0
\f0\fs28 \cf2 \cb3 {\listtext	1	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 git clone https://github.com/sipwise/rtpengine.git rtpengine\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	2	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	3	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 cd rtpengine\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	4	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	5	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 git checkout mr12.4\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	6	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	7	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 git status\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	8	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	9	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 	On branch mr12.4\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	10	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	11	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 	Your branch is up to date with 'origin/mr12.4'.\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	12	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	13	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 cd daemon\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	14	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	15	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 make\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	16	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	17	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 ****************\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	18	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	19	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 ****************\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	20	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	21	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 ( echo '/******** GENERATED FILE ********/' && \\\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	22	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	23	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 	echo '#line 1' && \\\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	24	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	25	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 	cat ../lib/"mix_in_x64_sse2.S" ) > "mix_in_x64_sse2.S"\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	26	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	27	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 cc    -c -o mix_in_x64_sse2.o mix_in_x64_sse2.S\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	28	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	29	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 cc -rdynamic -flto=auto -g -Wall -Wextra -Wno-sign-compare -Wno-unused-parameter -Wstrict-prototypes -Werror=return-type -Wshadow -pthread -fno-strict-aliasing -std=c11 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include  -pthread -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include    -pthread  -DPCRE2_CODE_UNIT_WIDTH=8     -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -pthread      -DWITH_IPTABLES_OPTION -I. -I../kernel-module/ -I../lib/ -I../include/ -D_GNU_SOURCE -I/usr/include/ffmpeg  -I/usr/include/ffmpeg  -I/usr/include/ffmpeg  -I/usr/include/ffmpeg  -I/usr/include/ffmpeg   -I/usr/include/opus  -DWITH_TRANSCODING -I/usr/include/mysql -I/usr/include/mysql/mysql -DHAVE_BCG729  -DHAVE_MQTT  -DRTPENGINE_VERSION="\\"git-mr12.4-0eec1b31\\""  -DHAVE_LIBSYSTEMD -O3 -flto=auto -ffat-lto-objects -o rtpengine main.o kernel.o helpers.o control_tcp.o call.o control_udp.o redis.o bencode.o cookie_cache.o udp_listener.o control_ng_flags_parser.o control_ng.strhash.o sdp.strhash.o stun.o rtcp.o crypto.o rtp.o call_interfaces.strhash.o dtls.o log.o cli.o graphite.o ice.o media_socket.o homer.o recording.o statistics.o cdr.o ssrc.o iptables.o tcp_listener.o codec.o load.o dtmf.o timerthread.o media_player.o jitter_buffer.o t38.o websocket.o mqtt.o janus.strhash.o audio_player.o nftables.o loglib.o auxlib.o rtplib.o str.o socket.o streambuf.o ssllib.o dtmflib.o mix_buffer.o poller.o bufferpool.o codeclib.strhash.o resample.o uring.o mvr2s_x64_avx2.o mvr2s_x64_avx512.o mix_in_x64_avx2.o mix_in_x64_avx512bw.o mix_in_x64_sse2.o -lm -ldl -lglib-2.0  -lgthread-2.0 -pthread -lglib-2.0  -lz  -lpcre2-8  -lcrypto  -lssl -lcrypto  -levent_pthreads -levent  -lpcap -lxmlrpc_client  -lxmlrpc  -lxmlrpc_util  -lhiredis -ljson-glib-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0  -lwebsockets  -lnftnl  -lmnl  -lip4tc -lip6tc  -lavcodec  -lavformat  -lavutil  -lswresample  -lavfilter  -lspandsp  -lopus  -L/usr/lib64/ -lmariadb -lbcg729  -L/usr/lib -lmosquitto  -lsystemd \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	30	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	31	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 /usr/bin/ld: dynamic STT_GNU_IFUNC symbol `s16_mix_in.lto_priv.222' with pointer equality in `/tmp/cc3IdiIR.ltrans2.ltrans.o' can not be used when making an executable; recompile with -fPIE and relink with -pie\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	32	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	33	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 collect2: error: ld returned 1 exit status\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	34	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	35	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 make[1]: *** [../lib/common.Makefile:7: rtpengine] Error 1\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	36	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	37	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 rm sdp.strhash.c control_ng.strhash.c call_interfaces.strhash.c janus.strhash.c\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	38	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	39	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 make[1]: Leaving directory '/usr/local/src/rtpengine/daemon'\
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	40	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec4 \
\ls1\ilvl0\kerning1\expnd0\expndtw0 \outl0\strokewidth0 {\listtext	41	}\expnd0\expndtw0\kerning0
\outl0\strokewidth0 \strokec2 make: *** [../lib/common.Makefile:4: all] Error 2\strokec4 \
}